Browse Items (2150 total)
Sort by:
-
Spray dried nano oxide ceramics for free flowing plasma spray coating powders and battery material processing
Advanced materials are widely used in electronics, aerospace and automobile industry devices and also in substances synthesized for food, medical and pharmaceutical industries. The quality of the base material powder has high influence on the resulting material body (the product) which goes into the manufacture of the device. To name a few (a) flowable ceramic powders from agglomerated nano ceramic powders for plasma spray coatings with the right sprayable powder characteristics (b) advanced graphene encapsulated nano ceramic oxide powders with uniform conductive coating layers as promising electrodes in Li-Ion batteries, (c) advanced bio-ceramic oxides such as hydroxy-apatite ceramic materials with right amounts of moisture, density and composition consistency as bone and dental implants in bio-ceramics research are examples. Among the many processing methods to achieve the base powders from nano ceramic raw materials the most capable and efficient is 'Spray Drying' which results in powders with high purity with well-defined properties. Complex composite by spray drying is achieved where the 'matrix host' material is encapsulated by the 'guest layer' with special properties. This paper illustrates results pertaining to experimentation via spray drying and microscopic investigation by using SEM associated with EDS on (a) Yttria stabilized zirconia plasma sprayable powders for Thermal Barrier Coatings application and (b) nano yttria stabilized zirconia incorporated into microns sized alumina powders for enhanced densification, to understand the significant role of process parameters on uniformity and consistency of the spray dried products. Information based on review on spray dried Li-ion battery materials is also included. Published under licence by IOP Publishing Ltd. -
PSA-MP: Path Selection Algorithm for MANET depends on Mobility Prediction to Enhance Link Stability
Link failure is a much crucial issue to be addressed for improving the stability of the routing. Selection of a stable path is an important task since nodes are mobile. The instability of a link leads to frequent link failure, which further causes to link re-establishment. In this paper, a Path Selection Algorithm based on Mobility Prediction (PSA-MP) is proposed that uses Mobility, Direction and Link Expiration Time (LET) as metrics to evaluate the link stability. In the existing algorithm, if any link gets fails during the link-establishment phase, it informs the previous node for selecting alternate link. But, in PSA-MP the alternate link is selected before a link fails by predicting Mobility, Direction and LET of nodes. As a result, it reduces link re-establishment delay. Ultimately, PSA-MP reduces E2Edelay, which in turn boosts Packet Delivery Ratio (PDR). Eventually, link stability is enhanced in MANETs, which is the focus of this paper. Published under licence by IOP Publishing Ltd. -
Twitter Hate Speech Detection using Stacked Weighted Ensemble (SWE) Model
Online Social Media has expanded the freedom of expression in the internet, which has become a disturbing problem if it has an impact on the situation or the interest of a country. Hate speech refers to the use of hostile, abusive or offensive language, directed at a certain group of people who share common property, whether it is their gender, ethnicity or race (i.e. racism), faith and religion. Therefore, auto detection of hate speeches has an increased importance in Online Social Media for filtering any message that has hatred language before posting it to the network. In this paper, a Stacked Weighted Ensemble (SWE) model is proposed for the detection of hate speeches. The model ensembles five standalone classifiers: Linear Regression, Nae Bayes', Random Forest, Hard Voting and Soft Voting. The experimental results on a Twitter dataset has shown an accuracy of 95.54% in binary classification of tweets into hateful speech and an improved performance is noted compared to the standalone classifiers. 2020 IEEE. -
C-cordial labeling of line signed graphs-I
Let S=(G, ?) be a signed graph. S admits C-cordial labeling if the difference between the number of negative and positive edges (vertices) differ by at most one under canonical marking of S. In this paper, we characterize signed paths and cycles having given number of negative sections where the line signed graphs admit C-cordial labeling. 2020 Author(s). -
Svsl on combination of star with path
Super Vertex Sum Graph is a graph which admits super vertex sum labeling. In this paper, we combine stars and paths under different combinations which results in formation of new graphs and construct algorithm to obtain optimal super vertex sum labeling for the new graphs formed and their super subdivided graphs. 2020 Author(s). -
Handwritten Character Recognition of MODI Script using Convolutional Neural Network Based Feature Extraction Method and Support Vector Machine Classifier
Deep learning based algorithms are used in various pattern recognition tasks, including character recognition. Convolutional Neural Network (CNN) is effectively implemented for character recognition and is one of the best performing deep learning models. CNN can be used for character recognition directly or it can be used for extracting features in the character recognition process. Implementation of a feature extraction method using CNN autoencoder for MODI script character recognition is discussed in the paper. The extracted features are then subjected to Support Vector Machine (SVM) for the purpose of classification. The On-the-fly data augmentation method is used to add variability and generalization of the data set. MODI Script is an ancient Indian script and was used for writing Marathi until 1950. Various libraries and temples in India and abroad have a large collection of MODI documents. Character recognition related research of MODI script is still in infancy and research and development is necessary to extract the information from MODI manuscripts stored in various libraries. The performance of the proposed method, which uses CNN autoencoder as a feature extractor and an SVM based classifier gives very high accuracy and is better compared to the most accurate MODI character recognition method reported so far. 2020 IEEE. -
On the Laplacian energy of interval valued fuzzy graphs
Interval valued fuzzy Laplacian matrix (IVFLM) associated with an interval valued fuzzy graph (IVFG) is studied in this paper. We define spectrum, energy, Laplacian spectrum and Laplacian energy and obtain some bounds for energy and Laplacian energy. 2020 Author(s). -
New developments in the study of parity signed graphs
A signed graph has all its edges signed with either negative or positive signs. Parity signed graphs are generated from the integer labeling of the vertices of a graph. An edge gets a positive sign if its end vertices are of the same parity and gets a negative sign if its end vertices are of the opposite parity. Signed graphs which admit parity labeling can be characterized. All parity signed graphs are balanced but not the converse. 2020 Author(s). -
Influence of cryogenic treatment of cutting tool inserts on tool wear and surface roughness during milling of Inconel 718
Inconel 718 is a superalloy which is a hard to difficult machining material. It is widely used in industries such as aerospace, defence, energy production, biomechanical and marine. It is used at elevated temperatures and areas where thermal and fatigue stress is high. Due to its superior quality and hard surface, machining of this material becomes a challenge. Cutting tools have failed enormously in milling this material. However, tungsten carbide and ceramics have found some effective features in creating a better machinability. In this paper, microstructure of the inserts have been studied during machining to determine low surface roughness on the material. Cryogenic treatment of the inserts has been carried out to improve tool life and compared with the untreated inserts. 2020 Author(s). -
On degree product induced signed graphs of graphs
A signed graph is a graph with positive or negative signs assigned to edges. An induced signed graph is a signed graph constructed from a given graph according to some pre-defined protocols. An induced signed graph of a graph G is a signed graph in which each edge uv receives a sign (-1)|?(v)-?(u)|, where ?: V(G) ? ?. In this paper, we discuss degree product induced signed graphs and determine the structural properties of these signed graphs such as balancing, clustering, regularity and co-regularity. 2020 Author(s). -
Sum signed graphs - I
Let G=(V,E) be a simple graph, f: V(G) ? {1, 2, ..., |V(G)|} be a bijective function and ?: E(G) ? {+,-} be a mapping such that ? (uv)=+, whenever f(u)+f(v) ? n and ? (uv)=-, whenever f(u)+f(v)>n. Then, S=(G,f,?) is said to be a sum signed graph. In this paper, we initiate the study of sum signed graphs. Also, we find rna number for some classes of graphs and present some of the characteristics of sum signed graphs. 2020 Author(s). -
Enhancement of efficiency of military cloud computing using lanchester model
Cloud computing is a technology that uses centrally processed computing resources over the Internet by a large number of users. Because many requests are concentrated on cloud servers, they must be properly distributed to avoid degradation of quality. Load balancing categorizes requests from users according to established algorithms and assigns appropriate virtual machines. Because load balancing algorithms are developed according to the cloud's usage environment, various algorithms are being utilized. Recently, government agencies are also interested in introducing cloud technologies beyond private sectors. Many militaries have selected Cloud as its basic task to apply new technologies such as AI to military operations. However, there is no precedent for military cloud development, and the lack of doud technology research considering the operational environment has delayed the progress of cloud adoption. The algorithm presented by this paper makes the combat power, which varies according to the importance of the operation, an important variable. This variable makes each user's access to computing resources different. Although similar to other dynamic algorithms, the impact of priorities is so big that the degree of imbalance between tasks was higher. 2020 IEEE. -
Mental Health Data Analysis Using Cloud
In health care related research studies, there exists a need for retrieving patient's health record from multiple sites. So here comes the digitization of health records, which leads to a wide range of access to various users such as doctors, patients, psychiatrists and pharmacists. The sensitive nature of individual health care data pose a threat to security. Moreover, the increased access of health information by the users threatens the privacy and confidentiality of the stored data. Notwithstanding the existing privacy protection approaches used for mental health records, we suggest a privacy preserving data analysis methodology enabling protection of health records, once user access to records are granted. This paper mainly focuses on utilizing the data analysis approach in preserving privacy of personal health records to overcome the drawbacks of existing approaches. 2020 IEEE. -
Cloud based ERP Model using Optimized Load Balancer
Enterprise Resource Planning (ERP) and Cloud computing are turning out to be increasingly more significant in the field of Information Technology (IT) furthermore, Communication. These are two distinct segments of current data frameworks, and there are a few inside and out examinations about Enterprise Resource Planning on cloud computing framework. ERP frameworks are related with a few issues, for example, shared synchronization of multi-composed assets, constrained customization, massive overhauling cost, arrangement mix, industry usefulness, reinforcement support and innovation refreshes. These issues render ERP frameworks execution excruciating, complex and time-devouring and create the need for a huge change in ERP structure to upgrade ERP frameworks foundation and usefulness. Cloud Computing (CC) stages can defeat ERP frameworks inconsistencies with financially savvy, redid and profoundly accessible figuring assets. The objective of this examination is to blend ERP and CC benefits to lessen the factor of consumption cost and execution delays through a proposed system. For this reason, investigate the unmistakable issues in current ERP frameworks through a complete correlation between ERP when moving to CC condition. Also, a conventional structure is proposed for 'Cloud-based ERP frameworks'. 2020 IEEE. -
Rectangular Microstrip Patch Antenna Array Based Sectored Antenna for Directional Wireless Sensor Networks
Directional wireless Sensor Network (DSN) outperforms Wireless Sensor Network (WSN) over different parameters such as transmission range, interference, spatial reusability and energy efficiency. In this paper, a Rectangular Patch antenna Array (RPA) based sectored antenna is proposed for DSN. The individual sector is composed of two-element rectangular patch antenna array with a measured peak gain of 5.2 dBi and half-power beamwidth of 45. Single Pole 8 Throw (SP8T) Radio Frequency (RF) switchboard is designed to connect the sectored antenna to MICAz WSN mote. The antenna performance analysis carried out in simulation and real-time measurement via Ansys High Frequency Structure Simulator (HFSS) and Vector Network Analyzer (VNA) exhibits higher gain, lower return loss, half-power beamwidth and Voltage Standing Wave Ratio (VSWR). 2020 IEEE. -
Some characterizations of Gallai graphs
Gallai graph of a graph G is a graph whose vertices are the edges of G and the adjacency of the vertices depends on whether they are part of a triangle or not in G. We find some forbidden subgraph characterization of graphs for which Gallai graph is either a trivially perfect graph or a 3-sun-free graph or an interval graph. 2020 Author(s). -
A model for analyzing the sustainability performance in educational institutions
During the past two decades innumerable international initiatives have emphasized that education is an imperative for societies to become more sustainable. Sustainable development is the current context in which higher education must begin to focus its action plans. But the present system heavily relies on archaic models which reduce learning and action to reductionist thinking and mechanistic interpretation. Campus sustainability is receiving growing attention and has become a well-established study field, even though campus sustainability itself has not become a reality yet in most universities. The paper then validates a pre-existing model using multiple regression models. The results validated the proposed model. A sustainability index could be developed for the education sector in future using this conceptual framework. The educational institutions can use the sustainability index to analyze their sustainability performance and take the necessary steps for achieving the same. This paper is an initial step in this direction which could be researched further to measure the sustainability performance in the education system. Grenze Scientific Society, 2020. -
An Experimental Investigation on Flexural Strength of Ferrocement Slab Made of Slag Sand Partially Replaced with Iron Ore Tailings
Effective use of slag sand and Iron Ore Tailings and other waste obtained from the manufacturing industry and mining industry like waste foundry sand, will reduce the negative impact on the environment and also will provide opportunities for effective use of natural resources and contribute to sustainability. The aim of this research project is to study the flexural strength of ferrocement slab made of slag sand partially replaced with iron ore tailings with sustainability point of view. Investigation of 48 slab panels of 700mm 300 mm size with thickness 25 mm and 30 mm was conducted using 1 and 2 layers of weld mesh reinforcement casted with different percentage of iron ore tailings. Slabs were tested in Universal Testing Machine, which showed good results with 15% of iron ore tailings. Published under licence by IOP Publishing Ltd. -
On interval valued fuzzy graphs associated with a finite group
We associate a particular type of interval-valued fuzzy graph(IVFG) called interval-valued fuzzy identity graph(IVFIG) with every finite group and study its various properties. We show that IVFIG associated with a finite group is not unique. We also show that every IVFIG associated with a finite group is a strong IVFG. It does not contain any feeble or weak arcs. Further, it is strongly connected. We prove that the IVFIG associated with a finite group in which every element is self inversed is an interval-valued fuzzy tree and the IVFIG of Zn (n is odd) under addition modulo n is the disjoint union of interval-valued fuzzy cycles. 2020 Author(s). -
Stress strain characteristics of reinforced hollow concrete block masonry melded with mesh reinforcement
Plain Masonry similar to unreinforced concrete, is resilient in compression and weak in tension. Masonry gains strength with age similar to concrete. Inspite of these resemblances, there exist numerous differences between masonry and concrete. The major difference is the regular pattern of horizontal joints(known as bed joints) at specific intervals along the height of walls introduce due to the method of construction of masonry. These bed joints make masonry a direction dependent material possessing orthotropic properties, unlike concrete which is usually regarded as isotropic atleast in the elastic range. Mechanical properties such as compressive strength, tensile strength, flexural strength are a pre-requisite as part of the design of masonry walls. The present study deals with the experimental study to evaluate the mechanical properties of hollow concrete block masonry specimens for varying cement mortar proportions melded with mesh reinforcement at bed joints. Parameters such as compressive strength, modulus of elasticity, failure pattern have been studied and compared for reinforced and unreinforced hollow concrete block prisms. The study showed higher compressive strength and improved elastic modulus for specimens with higher grade of mortar Published under licence by IOP Publishing Ltd.