Formaldehyde electrolysis in a membrane-free electrolyzer: low-energy hydrogen and formate co-production with Cu-based boride electrocatalysts
description: The formaldehyde oxidation reaction (FOR) offers a low-energy alternative to the oxygen evolution reaction (OER) for electrochemical hydrogen production, enabling simultaneous generation of value-added formate. Here, we report a boron-doped copper catalyst on copper foam (B/CuxO/CF) that efficiently catalyzes FOR with an ultralow onset potential of 0.06 V at 100 mA cm?2. Compared to its phosphorus- and sulfur-doped counterparts (P/CuxO/CF and S/CuxO/CF), B/CuxO/CF exhibits markedly superior activity with ?97% formate yield. Surface analysis confirms the critical role of coexisting Cu+/Cu2+ species in B/CuxO in facilitating the key FOR steps of adsorption and CH cleavage, while the presence of boron improves charge transfer and active site availability. The limited HER activity of B/CuxO/CF was effectively addressed by coupling it with a Ni-based phospho-boride catalyst on Ni foam (NiPB/NF) that delivers selective and high hydrogen evolution performance, even in formaldehyde-containing media. The asymmetric NiPB/NF?B/CuxO/CF configuration achieved 100 mA cm?2 at only 0.25 V and sustained long-term stability with continuous HCHO replenishment, maintaining 300 mA cm?2 for over 8 hours. Operated in a membrane-free flow cell, the system maintained ?90% formate yield with a H2 production faradaic efficiency of ?190%, nearly doubling the hydrogen output. This hybrid strategy not only lowers energy input by 1.64 V compared to water electrolysis but also demonstrates viability for decentralized hydrogen and chemical co-production with economic benefits. This journal is The Royal Society of Chemistry, 2026
creator: Thorawade, Sahil; Patel, Rupali; Bhide, Aniruddha; Gupta, Suraj; Fernandes, Rohan; Patel, Nainesh
source: Journal of Materials Chemistry A;Volume;14;Issue;23;pp.14623-14636
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 20507488; CODEN: JMCAE
format: online
language: English
type: Article
coverage: Thorawade S., Department of Physics and Electronics, Christ University, Bengaluru, 560029, India; Patel R., Department of Physics and Electronics, Christ University, Bengaluru, 560029, India; Bhide A., Department of Physics and Electronics, Christ University, Bengaluru, 560029, India; Gupta S., Advanced Materials Department, Joef Stefan Institute, Jamova 39, Ljubljana, 1000, Slovenia; Fernandes R., Department of Physics and Electronics, Christ University, Bengaluru, 560029, India; Patel N., Department of Physics and Electronics, Christ University, Bengaluru, 560029, India

Systematic investigation on unsymmetrical mesogenic cyanobiphenyl dimers towards optical storage devices: synthesis, mesomorphic, photo switching and DFT studies
description: This research presents the synthesis and analysis of a novel series of mesogenic dimers comprising cyanobiphenyl and azonaphthyl units. Structural validation was performed using FT-IR, 1H-NMR, 13C-NMR, elemental analysis, mass spectrometry, etc. The dimers thermotropic behaviours were studied through POM and DSC, revealing enantiotropic nematic phases in all cases, with some also showing monotropic smectic C phases. The study explores the relationship between the chemical structure of the dimers and the length of the flexible spacer, the odd-even effect, and their phase transition temperatures. Longer chains tended to form smectic phases, while shorter chains primarily exhibited nematic phases. Computational analysis using B3LYP/6-31g(d,p) and evaluations of electrostatic potential (ESP) and optical properties provided further insight into the electronic structures. Photoisomerization studies demonstrated consistent photochromic responses, with all dimers showing high conversion efficiency (88-95%) under UV light along with similar back relaxation times (?10-12 hours). Optical storage devices prepared by these materials showed excellent contrast between dark and bright states elucidating the importance of such materials for the future. 2025 The Royal Society of Chemistry.
creator: Rabari, Mahima; Hegde, Vasundhara; Hegde, Gurumurthy; Prajapati, A.K.
source: Journal of Materials Chemistry C;Volume;13;Issue;21;pp.10700-10713
publisher: Royal Society of Chemistry
date: 01-01-2025
rights: All Open Access; Hybrid Gold Open Access
relation: ISSN: 20507526; CODEN: JMCCC
format: online
language: English
type: Article
coverage: Rabari M., Department of Chemistry, Faculty of Science, The Maharaja Sayajirao University of Baroda, Vadodara, 390002, India; Hegde V., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India; Hegde G., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India, Centre for Advanced Research and Development, Christ University, Hosur Road, Bengaluru, 560029, India; Prajapati A.K., Department of Chemistry, Faculty of Science, The Maharaja Sayajirao University of Baroda, Vadodara, 390002, India

A self-powered and stretchable magnetic film for humanmachine interface applications
description: Developing stretchable, self-powered electronic interfaces for ambient energy harvesting is crucial for next-generation wearable electronics and humanmachine interface applications. We present a stretchable magnetoelectric composite film comprising Ni0.5Co0.5Fe2O4magnetic nanoparticles embedded in an Ecoflex matrix. The nanoparticles, synthesized via co-precipitation, exhibit a strong magnetic response, while Ecoflex ensures high stretchability and skin-mountable adaptability. The comprehensive structural, morphological, and magnetic analyses confirm the formation of a uniform and multifunctional film. The optimized device delivers a peak output voltage of ?8.3 V and a power density of 3.16 mW cm?3under ambient magnetic fields, outperforming conventional soft nanogenerators. The films demonstrate excellent durability under repeated deformation and maintain stable performance at tensile strains up to ?315%. Integration into a soft wearable platform enables real-time gesture recognition, with distinct voltage signals for finger bends and gestures under low-intensity magnetic fields. This work highlights the potential of magnetic/Ecoflex-based nanogenerators in self-powered, wearable, stretchable electronics, smart prosthetics, and intelligent humanmachine interfaces. This journal is The Royal Society of Chemistry, 2025
creator: Yadav, Sandeep Kumar; Salian, Raksha D.; Mathias, Royston; Kumbhakar, Partha
source: Journal of Materials Chemistry C;Volume;13;Issue;46;pp.23259-23268
publisher: Royal Society of Chemistry
date: 01-01-2025
rights: All Open Access; Hybrid Gold Open Access
relation: ISSN: 20507526; CODEN: JMCCC
format: online
language: English
type: Article
coverage: Yadav S.K., Department of Physics and Electronics, Christ University Bangalore, 560029, India; Salian R.D., Department of Physics and Electronics, Christ University Bangalore, 560029, India; Mathias R., Department of Physics and Electronics, Christ University Bangalore, 560029, India; Kumbhakar P., Department of Physics and Electronics, Christ University Bangalore, 560029, India

Photoaligned nematic liquid crystals doped with palladium-immobilised carbon nanospheres for advanced low-voltage display and energy storage devices
description: This study presents a nematic liquid crystal (NLC), D30-17, doped with palladium-immobilised carbon nanospheres (CNS) Pd/ON10 at two different concentrations. The composites were prepared with 0.1 and 0.4 wt/wt% dopant concentrations and are referred to as Mix 1 and Mix 2, respectively. The palladium-immobilized carbon nanospheres were employed because they function as advanced materials for catalysis and energy applications owing to the catalytic properties of palladium. The sample holder used in this experiment consisted of photo-aligned cells coated with a photosensitive alignment layer, Cibacron brilliant yellow (CBY). The textural studies revealed improved alignment in the doped mixtures. The frequency- and temperature-dependent dielectric behaviour was analysed for the pure and doped systems in both the planar (at 0 V) and homeotropic (at 12 V) states. Dielectric studies showed that the relative permittivity, dielectric loss, and conductivity of the doped material increased with increasing dopant concentration compared with that of pure NLC. Compared with the pure NLC and Mix 2, Mix 1 exhibited greater dielectric anisotropy, leading to a lower threshold voltage. A reversal in the dielectric anisotropy was also observed, which was attributed to the bistable inversion in the CBY alignment layer of the photo-aligned cells. Optical studies indicated that there was no significant shift in wavelength with respect to the dopant concentration. These composites are expected to find applications in liquid-crystal-based electronic and photonic devices. This journal is The Royal Society of Chemistry, 2026
creator: Shukla, Garima; Rastogi, Ayushi; S, Supriya; Hegde, Gurumurthy; Manohar, Rajiv
source: Journal of Materials Chemistry C;Volume;14;Issue;16;pp.6743-6755
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 20507526; CODEN: JMCCC
format: online
language: English
type: Article
coverage: Shukla G., Liquid Crystal Research Laboratory, Department of Physics, University of Lucknow, Uttar Pradesh, Lucknow, 226007, India; Rastogi A., Liquid Crystal Research Laboratory, Department of Physics, University of Lucknow, Uttar Pradesh, Lucknow, 226007, India, Amity School of Applied Sciences, Amity University, Karnataka, Bengaluru, 562110, India; S S., Department of Chemistry, B. M. S. College of Engineering, Bull Temple Road, Karnataka, Bengaluru, 560019, India, Centre for Nanomaterials & Displays, B. M. S. College of Engineering, Bull temple Road, Karnataka, Bengaluru, 560019, India; Hegde G., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India, Adindistech Private Limited, Manpho Pavillion Building, Bilekahalli, Bengaluru, 560076, India; Manohar R., Liquid Crystal Research Laboratory, Department of Physics, University of Lucknow, Uttar Pradesh, Lucknow, 226007, India

A new benzothiazoloacetonitrile-derived fluorescent probe for selective hydrazine detection and its applications in bioimaging and cotton swab analysis
description: Hydrazine (N2H4) is extensively utilized in various chemical industries. However, it is a highly toxic and explosive chemical posing a serious risk to human health and the environment, which warrants its quick and selective detection. To address this issue, we introduce a benzothiazoloacetonitrile-based fluorescent probe containing a recognition site for hydrazine detection. Adding the benzothiazoloacetonitrile group to the phenanthroline-based imidazole fluorophore increased BTN's electrophilicity, aiding the nucleophilic attack by hydrazine. This led to a rapid fluorescence change from orange to green within one minute, with a limit of detection (LOD) of 0.21 M, resulting from the cleavage of the olefinic bond between the donor and acceptor units. The probe's selective response to hydrazine was supported by a specific reaction mechanism, confirmed by LC-MS and DFT studies. Additionally, the probe can detect hydrazine using cotton swabs for quick, on-site testing. It also allows for clear visualisation in living cells through different fluorescence channels. Overall, these results demonstrate that the probe exhibits significant potential for the detection of hydrazine in environmental and biological samples. This journal is The Royal Society of Chemistry, 2026.
creator: Durgi, Nikita Kush; D. K., Ramesh; Manjappa, Kiran B.; Pujar, Prasad Pralhad
source: Analyst ;
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 32654; CODEN: ANALA
format: online
language: English
type: Article
coverage: Durgi N.K., Department of Chemistry, Christ University, Karnataka, Bangalore, 560029, India, Centre for Renewable Energy and Environmental Sustainability, Christ University, Bangalore, 560029, India; D. K. R., Department of Chemistry, Christ University, Karnataka, Bangalore, 560029, India, Centre for Renewable Energy and Environmental Sustainability, Christ University, Bangalore, 560029, India; Manjappa K.B., College of Science, Tunghai University, Bangalore, 560029, India; Pujar P.P., Department of Chemistry, Christ University, Karnataka, Bangalore, 560029, India, Centre for Renewable Energy and Environmental Sustainability, Christ University, Bangalore, 560029, India

Cr2MoAlC2 MAX phase and its derivative Cr2MoC2Tx MXene for supercapacitors and electrocatalytic water splitting
description: The expanding research on 2D MXenes has enabled new strategies to engineer material properties via structural design. While bimetallic or double transition metal (DTM) MXenes have continued to gain attention since their emergence in 2015, their versatile structure and exceptional physicochemical properties have inspired wide exploration. This study reports the synthesis of the Cr2MoAlC2 MAX phase and its derivative Cr2MoC2Tx MXene (Tx = F/OH/O), leveraging the synergistic incorporation of Cr and Mo as dual transition metals. The structural, thermal, chemical, and surface morphology characteristics were analyzed using various techniques. Cr2MoC2Tx MXene exhibits superior pseudocapacitance performance as an electrode material, achieving a specific capacitance of 1350 F g?1 at 1 A g?1 with 84% retention over 5000 cycles. In a two-electrode asymmetric device, Cr2MoC2Tx MXene delivers a specific capacitance of 438.3 F g?1 at 1 A g?1, an energy density of ?87.66 Wh kg?1, and a power density of 1200 W kg?1. Additionally, Cr2MoC2Tx MXene demonstrates excellent electrocatalytic activity for water splitting applications, with overpotentials of 186 mV for the hydrogen evolution reaction (HER) and 280 mV for the oxygen evolution reaction (OER), at 10 mA cm?2. This dual functionality, driven by the synergistic interaction between Cr and Mo, establishes Cr2MoC2Tx MXene as a promising material for both energy storage and hydrogen production, positioning it as a competitive candidate among state-of-the-art materials. Furthermore, this research aligns with the United Nations Sustainable Development Goal (SDG) 7, contributing to the advancement of high-performance electrode materials for next-generation electrochemical applications. This journal is The Royal Society of Chemistry, 2026.
creator: Madhushree, R.; Sunajadevi, Kalathiparambil Rajendra Pai
source: Dalton Transactions;
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 14779226; CODEN: DTARA
format: online
language: English
type: Article
coverage: Madhushree R., Department of Chemistry, Christ University, Bangalore, 560029, India, Centre for Renewable Energy and Environmental Sustainability, Christ University, Bangalore, 560029, India; Sunajadevi K.R.P., Department of Chemistry, Christ University, Bangalore, 560029, India, Centre for Renewable Energy and Environmental Sustainability, Christ University, Bangalore, 560029, India

Copper immobilized on a layered magnetite-based nanocatalyst for sustainable Ullmann cross-coupling reaction
description: This study demonstrates the efficient synthesis of diarylthioethers via CS cross-coupling between diverse aryl halides and arylthiols utilizing a magnetically retractable Fe3O4@SiO2PrNH2SACu(ii) nanocatalyst using K2CO3 as a base in DMF. The heterogeneous nanocatalyst was fabricated through a multistep process. The designed catalyst was characterized using various techniques, such as XRD, HRTEM, FESEM, STEM, EDAX, elemental mapping, TGA, VSM, XPS, ICP-OES and FT-IR. The catalyst design provides a dual role of the Schiff base-anchoring copper ions, to accelerate the oxidative addition and reductive elimination steps. This method makes use of ligand-free synthesis of diarylsulfides, enabling magnetic recovery and reuse of the catalyst for up to 6 cycles. The nanocatalyst exhibited high catalytic activity and a broad substrate scope. The magnetic nature of the nanocatalyst enabled easy separation from the reaction mixture using an external magnet, thus simplifying the workup. The synthesized nanocatalyst was then utilized for the synthesis of diarylthioethers and heterodiarylthioethers. The pure compounds were characterized using 1H and 13C NMR. This catalytic system offers a cost-effective, efficient, and simple protocol for the formation of the CS bond. This journal is The Royal Society of Chemistry, 2026.
creator: D Souza, Eden Sinchana; Nizam, Aatika
source: Materials Advances;Volume;7;Issue;9;pp.4744-4753
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: All Open Access; Gold Open Access
relation: ISSN: 26335409;
format: online
language: English
type: Article
coverage: D Souza E.S., Department of Chemistry, Christ University, Bengaluru, 560029, India; Nizam A., Department of Chemistry, Christ University, Bengaluru, 560029, India

A turn-on bis-hydrazone fluorescent chemosensor for selective Cd2+ detection: synthesis, structural insights, and theoretical validation
description: Heavy metal pollution, particularly from cadmium(ii) ions (Cd2+), causes severe environmental and health risks due to its acute toxicity, carcinogenicity, and bioaccumulation, leading to kidney damage, neurological disorders, and other physiological issues. Herein, we report the one-pot synthesis of a bis-hydrazone-based fluorescent probe L2H2O (1) for selective detection of Cd2+. Probe 1 was derived from isophthalaldehyde and 3-pyridylcarbonyl hydrazine and single-crystal X-ray diffraction discloses a well-defined binding pocket with pyridyl, imine, and carbonyl donor sites suitable for Cd2+ coordination. Probe 1 exhibits weak emission in CH3CN/HEPES buffer (9?:?1, v/v, pH 7.4) due to photoinduced electron transfer (PET) and unrestricted intramolecular rotations. Upon selective binding to Cd2+, 1 displays a pronounced turn-on fluorescence response with intensity enhancements of at ?324 nm and at 420 nm, accompanied by bathochromic shifts to 327 nm (?? = 3 nm) and 445 nm (?? = 25 nm) (?ex = 295 nm). The limit of detection (LOD) for probe 1 with metal Cd2+ is 3.39 M, with a binding constant of 5 103 M?1. 1H NMR titration, DFT-optimized geometries (B3LYP/6-31+G(d)/LANL2DZ), and simulated UV-Vis spectra further confirm binding of Cd2+, blocking PET and rigidifying the structure via chelation-enhanced fluorescence (CHEF). This work presents a modular hydrazone scaffold for developing selective Cd2+ sensors with potential application in environmental and biological monitoring. The Royal Society of Chemistry and the Centre National de la Recherche Scientifique, 2026.
creator: Adhikari, Suman; Nath, Sourav; Saha, Koushik; Baildya, Nabajyoti; Kaminsky, Werner; Kumar, Malavika S; Roy, Subhadip; Das, Avijit Kumar
source: New Journal of Chemistry;
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 11440546; CODEN: NJCHE
format: online
language: English
type: Article
coverage: Adhikari S., Department of Chemistry, Govt. Degree College, Tripura, Dharmanagar, (N)-799253, India; Nath S., Department of Chemistry, Govt. Degree College, Tripura, Dharmanagar, (N)-799253, India, Department of Chemistry and Vivekananda Centre for Research, Ramakrishna Mission Residential College, Narendrapur, Kolkata, 700103, India; Saha K., Department of Chemistry, Jadavpur University, West Bengal, Kolkata, 700032, India; Baildya N., Department of Chemistry, Milki High School, Milki, Malda, 732209, India; Kaminsky W., Department of Chemistry, University of Washington, Seattle, 98195, Washington, United States; Kumar M.S., Department of Chemistry, Christ University, Hosur Road, Karnataka, Bangalore, 560029, India; Roy S., Department of Chemistry, The ICFAI University Tripura, Kamalghat, Mohanpur, Tripura, Agartala, 799210, India; Das A.K., Department of Chemistry, Christ University, Hosur Road, Karnataka, Bangalore, 560029, India

Engineering Ru(ii) Schiff base complexes as biofunctional materials: cytotoxic and cell imaging perspectives
description: Four bromine-substituted Ru(ii)-arene Schiff base complexes derived from bromo-picolinaldehyde and 3-(1H-pyrazol-1-yl)propan-1-amine were examined for their cytotoxic behaviour toward cervical cancer (SiHa) and normal fibroblast (3T3-L1) cells using MTT-based in vitro assays. The ligands and complexes were comprehensively characterized by FTIR; 1H, 13C, and 19F NMR; and ESI-LCMS analyses. Single-crystal X-ray diffraction (SCXRD) confirmed the molecular structure of complex 3, while PXRD validated the crystalline nature of complexes 2 and 4. Density functional theory (DFT) calculations further supported the experimental data by revealing optimized geometries and key electronic descriptors. All complexes exhibited time- and dose-dependent anticancer effects, with complexes 24 showing the greatest cytotoxicity toward the SiHa cells (viability at 72 h: 20% 3%, 31% 3%, and 29% 3%, respectively) while maintaining high viability in normal fibroblasts (>90%). The IC50 values for complexes 14 were 19.54 2, 14.21 4, 12.43 4, and 12.43 4 M, respectively. Acridine orange (AO) and ethidium bromide (EtBr) staining and morphological analyses confirmed apoptosis as the primary mechanism of cell death, as evidenced by reduced adhesion, membrane blebbing, and cell rounding. The pronounced and selective cytotoxicity of these bromine-substituted Ru(ii) complexes highlights their potential as promising biomaterial candidates for targeted anticancer therapy. This journal is The Royal Society of Chemistry and the Centre National de la Recherche Scientifique, 2026
creator: Bhunya, Debasis; Datta, Riya; Maity, Swapan; Sahoo, Subhasish; Samanta, Bidhan Chandra
source: New Journal of Chemistry;Volume;50;Issue;12;pp.5266-5276
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 11440546; CODEN: NJCHE
format: online
language: English
type: Article
coverage: Bhunya D., Department of Chemistry, Christ University, Hosur Road, Karnataka, Bengaluru, 560029, India; Datta R., Department of Chemistry, Christ University, Hosur Road, Karnataka, Bengaluru, 560029, India; Maity S., School of Materials Science and Technology, Indian Institute of Technology (IIT), BHU, Varanasi, India; Sahoo S., Department of Chemistry, National Institute of Technology, Rourkela, 769008, India; Samanta B.C., Department of Chemistry, Mugberia Gangadhar Mahavidyalaya, Bhupatinagar, Purba Medinipur, West Bengal, India

Hormonal-mediated Cicer arietinum L. leaf extract-assisted synthesis of a ternary g-C3N4/ZrTiO4/V2O5 nanocomposite for photocatalytic remediation of organic pollutants
description: A novel green synthesis approach was developed for the fabrication of a g-C3N4/ZrTiO4/V2O5 nanocomposite (NC) using a hormone-treated plant extract as a biogenic reducing and stabilizing agent. The hormone-assisted synthesis had a significant influence on the physical, chemical, and morphological properties of the nanocomposite compared to the control route. The obtained NCs, confirmed by XRD, FTIR, UV-vis, SEM, and EDX analyses, exhibited enhanced crystallinity, a reduced band gap, and a distinct morphological transformation from nanorods to nanocubic structures. Elemental composition analysis confirmed the successful integration of Zr, Ti, and V components, improving the photocatalytic performance of the material. The hormone-mediated g-C3N4/ZrTiO4/V2O5 NC achieved an 89.14% degradation efficiency of Rose Bengal dye, maintaining its activity over three successive cycles without notable loss of performance. Furthermore, the photocatalyst efficiently converted degradation intermediates, such as benzyl alcohols, into valuable substituted benzaldehyde derivatives with yields ranging from 75% to 92%, demonstrating sustained catalytic stability over four consecutive cycles. These findings highlight the potential of hormone-assisted green synthesis as a promising and sustainable approach for designing advanced photocatalytic nanomaterials. This journal is The Royal Society of Chemistry and the Centre National de la Recherche Scientifique, 2026
creator: Venkatesan, Aakash; Nizam, Aatika; Theresa, Letcy V.; Xavier, Jobi; Ganganagappa, Nagaraju
source: New Journal of Chemistry;Volume;50;Issue;14;pp.6169-6181
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 11440546; CODEN: NJCHE
format: online
language: English
type: Article
coverage: Venkatesan A., Department of Chemistry, Christ University, Hosur Road, Bangalore, India; Nizam A., Department of Chemistry, Christ University, Hosur Road, Bangalore, India; Theresa L.V., Department of Chemistry, Christ University, Hosur Road, Bangalore, India; Xavier J., Department of Life Sciences, Christ University, Hosur Road, Bangalore, India; Ganganagappa N., Energy Materials Research Laboratory, Department of Chemistry, Siddaganga Institute of Technology, Tumakuru, 572103, India

Defect engineered unzipped multiwalled carbon nanotube/vanadium pentoxide composite for high-performance supercapacitor application
description: In the pursuit of next-generation energy storage systems, the advancement of high-performance electrode materials with enhanced capacitance and durability remains critical. This study presents a binary composite of unzipped multi-walled carbon nanotubes (UzMWCNTs) integrated with vanadium pentoxide (V2O5). The unzipping process introduces surface defects and oxygen functional groups, which enhance dispersion and provide numerous active sites. V2O5 nanoparticles uniformly anchor onto the UzMWCNT surface, offering pseudocapacitive behavior and boosting redox activity. The synergistic interaction between electric double-layer capacitance and faradaic charge storage delivers superior electrochemical performance. Structural and morphological characterization confirms successful composite formation, while electrochemical evaluations reveal a specific capacitance of 1135 F g?1 and cycling stability with 88% retention over 2000 cycles. This work highlights the potential of UzMWCNT/V2O5 hybrids as promising candidates for high-efficiency, next-generation supercapacitor electrodes. This journal is The Royal Society of Chemistry, 2026
creator: Aswathi, V.P.; Raman, Vidya; Sreeja, P.B.
source: RSC Advances;Volume;16;Issue;13;pp.11404-11414
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: All Open Access; Gold Open Access; Green Open Access
relation: ISSN: 20462069; CODEN: RSCAC
format: online
language: English
type: Article
coverage: Aswathi V.P., Centre for Renewable Energy and Environmental Sustainability, Department of Chemistry, CHRIST University, Karnataka, Bengaluru, 560029, India; Raman V., Department of Chemistry, T. M Jacob Memorial Government College, Manimalakkunu, Kerala, Koothattukulam, 686662, India; Sreeja P.B., Centre for Renewable Energy and Environmental Sustainability, Department of Chemistry, CHRIST University, Karnataka, Bengaluru, 560029, India

Carbon dots derived from Averrhoa bilimbi fruit for the detection of cholesterol and chromium(vi)
description: Carbon dots (CDs) are a class of carbon-based nanomaterials, typically less than 10 nm in size, known for their unique optical and electronic properties. Their discovery led to the opening of new avenues in nanotechnology, particularly in the field of fluorescence-based sensing. Owing to their strong photoluminescence, excellent aqueous solubility, low cytotoxicity, and potential surface functionalization, CDs have been considered as effective fluorescent probes for the detection of a wide range of analytes. Herein, we report the hydrothermal synthesis of CDs from a natural source, Averrhoa bilimbi fruit, leading to the formation of CDs exhibiting useful photoluminescent properties and potential for selective detection of cholesterol and Cr(vi) ions. The average particle size of Averrhoa bilimbi fruit-derived CDs (AB-CDs) was found to be 6.022 nm. The properties of AB-CDs were unravelled from structural and optical characterization and the applicability of AB-CDs as sensors for heavy metals and biomarkers was studied. The selective fluorescence response towards cholesterol and Cr(vi) makes it an efficient fluoroprobe for practical applications. The limits of detection for the sensing of cholesterol and Cr(vi) were estimated to be 0.31 M and 1.71 M respectively. The sensor system using AB-CDs is economical, sustainable, and eco-friendly. This journal is The Royal Society of Chemistry, 2026
creator: Joji Mathew, Aishwarya; Lisa John, Varsha; Aiswarya, P.S.; Vinod, T.P.
source: RSC Advances;Volume;16;Issue;13;pp.12132-12140
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: All Open Access; Gold Open Access; Green Open Access
relation: ISSN: 20462069; CODEN: RSCAC
format: online
language: English
type: Article
coverage: Joji Mathew A., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India; Lisa John V., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India; Aiswarya P.S., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India; Vinod T.P., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India, Centre for Renewable Energy and Environmental Sustainability, Christ University, Bengaluru, 560029, India

Fe doped ZnO nanomaterials for energy storage applications as high-capacitance supercapacitor electrodes
description: Enhancing the performance of electrode materials is essential for developing high-capacitance supercapacitors, and transition-metal-doped metal oxides have shown particular promise in this regard. In this work, Fe-doped ZnO nanostructures were synthesized using a sonochemical method and systematically examined through XRD, SEM, TEM, XPS and UVvis analyses to verify Fe incorporation and the resulting changes in crystallinity, morphology and optical behaviour. The structural modifications induced by Fe were evident in the electrochemical response, with the optimized ZnOFe sample delivering a specific capacitance of 11.4 F g?1 at 0.1 A g?1 in the two-electrode system and 462 F g?1 in the three-electrode system, both measured in 3 M KOH electrolyte. A CR2032 coin cell assembled with this material achieved an energy density of 1.6 Wh kg?1 and a power density of 2890.93 W kg?1, demonstrating an effective balance between energy storage and power output. These findings highlight the suitability of Fe-doped ZnO as a tunable electrode material and support its further exploration in advanced supercapacitor systems. This journal is The Royal Society of Chemistry, 2026.
creator: Veerabhadraiah, Srikanth R.; Soman, Gowri; Bhat, Sachin A.; Sharma, Rohit K.; Thimmappa, Ravikumar; Mirle, Chinmaya; Hegde, Gurumurthy; Yelamaggad, C.V.; Naik, Nagaraja
source: RSC Advances;Volume;16;Issue;27;pp.24997-25010
publisher: Royal Society of Chemistry
date: 01-01-2026
rights: All Open Access; Gold Open Access; Green Open Access
relation: ISSN: 20462069; CODEN: RSCAC
format: online
language: English
type: Article
coverage: Veerabhadraiah S.R., Department of Studies in Chemistry, Manasagangotri, University of Mysore, Mysuru, 570006, India; Soman G., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India; Bhat S.A., Centre for Nano and Soft Matter Sciences, Bengaluru, 562162, India; Sharma R.K., Centre for Nano and Soft Matter Sciences, Bengaluru, 562162, India; Thimmappa R., Department of Energy Science and E-Mobility, Atria University, Bengaluru, 560024, India; Mirle C., Institute of Organic and Macromolecular Chemistry, Ulm University, Albert-Einstein-Allee11, Ulm, 89081, Germany; Hegde G., Department of Chemistry, Christ University, Hosur Road, Bengaluru, 560029, India, Department of Chemistry, B. N. M. Institute of Technology, Banashankari, Karnataka, Bengaluru, 560070, India; Yelamaggad C.V., Centre for Nano and Soft Matter Sciences, Bengaluru, 562162, India; Naik N., Department of Studies in Chemistry, Manasagangotri, University of Mysore, Mysuru, 570006, India

Probing the formation of megaparsec-scale giant radio galaxies: I. Dynamical insights from magnetohydrodynamic simulations
subject: Galaxies: active; Galaxies: groups: general; Galaxies: jets; Magnetohydrodynamics (MHD); Methods: numerical
description: Context. Constituting a relatively small fraction of the extended-jetted population, giant radio galaxies (GRGs) form in a wide range of jet and environment configurations. This observed diversity complicates the identification of the growth factors that facilitate their attainment of megaparsec scales. Aims. This study aims to numerically investigate the hypothesized formation mechanisms of GRGs extending ?1 Mpc in order to assess their general applicability. Methods. We employed tri-axial ambient medium settings to generate varying levels of jet frustration and simulated jets with a low and a high power from different locations in the environment. This approach formulated five representations evolving under a relativistic magnetohydrodynamic framework. Results. The emergence of distinct giant phases in all five simulated scenarios suggests that GRGs may be more common than previously believed. This prediction can be verified with contemporary and forthcoming radio telescopes. We find that different combinations of jet morphology, power, and evolutionary age of the formed structure hold the potential to elucidate different formation scenarios. In all of these cases, the lobes are overpressured, prompting further investigation into pressure profiles when jet activity ceases, potentially distinguishing between relic and active GRGs. We observed a potential phase transition in GRGs marked by differences in lobe expansion speed and pressure variations compared to their smaller evolutionary phases. This suggests the need for further investigation across a broader parameter space to determine if lobe evolution in GRGs fundamentally differs from smaller radio galaxies. The axial ratio analysis reveals self-similar expansion in rapidly propagating jets, while there is a notable deviation when the jet forms wider lobes. Overall, this study emphasizes that multiple growth factors simultaneously at work can better elucidate the current-day population of GRGs, including scenar…
creator: Giri, Gourab; Bagchi, Joydeep; Thorat, Kshitij; Deane, Roger P.; Delhaize, Jacinta; Saikia, Dhruba J.
source: Astronomy and Astrophysics;Volume;693;Issue;;Article No.;A77;
publisher: EDP Sciences
date: 01-01-2025
rights: All Open Access; Gold Open Access
relation: ISSN: 46361; CODEN: AAEJA
format: online
language: English
type: Article
coverage: Giri G., Department of Physics, University of Pretoria, Private Bag X20, Hatfield, 0028, South Africa, South African Radio Astronomy Observatory, 2 Fir St, Black River Park, Observatory, 7925, South Africa; Bagchi J., Department of Physics and Electronics, Christ University, Hosur Road, Bangalore, 560029, India; Thorat K., Department of Physics, University of Pretoria, Private Bag X20, Hatfield, 0028, South Africa; Deane R.P., Department of Physics, University of Pretoria, Private Bag X20, Hatfield, 0028, South Africa, Wits Centre for Astrophysics, School of Physics, University of the Witwatersrand, 1 Jan Smuts Avenue, Johannesburg, 2000, South Africa; Delhaize J., Department of Astronomy, University of Cape Town, Private Bag X3, Rondebosch, 7701, South Africa; Saikia D.J., Inter-University Centre for Astronomy and Astrophysics, Post Bag 4, Pune, 411007, India

The birth of Be star disks: I. from localized ejection to circularization
subject: Circumstellar matter; Stars: emission-line, Be; Stars: oscillations; Stars: winds, outflows; Techniques: photometric; Techniques: spectroscopic
description: Context. Classical Be stars are well known to eject mass to build up a disk, but the details governing the initial distribution and subsequent evolution of this matter into a disk are in general poorly constrained through observations. Aims. By combining high-cadence time-series spectroscopy with contemporaneous space photometry from the Transiting Exoplanet Survey Satellite (TESS), we have sampled about 30 mass ejection events in 13 Be stars. Our goal is to constrain the geometrical and kinematic properties of the ejecta as early as possible, facilitating the investigation into the material's initial conditions and evolution, and understanding its interactions with preexisting material. Methods. The photometric variability is analyzed together with measurements of the at-times rapidly changing emission features in order to identify the onset of outburst events and obtain information about the geometry of the ejecta and how it changes over time. Short-lived line asymmetries display oscillation cycles (tefl frequencies), which are compared to photometric and stable spectroscopic frequencies. Results. All Be stars observed with sufficiently high cadence during an outburst are found to exhibit rapid oscillations of line asymmetry with a single frequency in the days following the start of the event. For a given star this circumstellar frequency may differ only slightly from event to event even when the outbursts they are associated with have different properties. These circumstellar frequencies are typically between 0.5 to 2 d- 1, and are generally near photometric frequencies. They are slightly below prominent (generally stable) spectroscopic frequencies seen in photospheric absorption lines. The emission asymmetry cycles break down after roughly 5- 10 cycles, with the emission line profile converging toward approximate symmetry shortly thereafter. In photometry, several frequencies typically emerge at relatively high amplitude at some point during the mass ejection pr…
creator: Labadie-Bartz, J.; Carciofi, A.C.; Rubio, A.C.; Baade, D.; Siverd, R.; Arcos, C.; Figueiredo, A.L.; Naz Y.; Neiner, C.; Rivinius, T.; Richardson, N.D.; Nova, S.; Pinho, M.L.; Bhattacharyya, S.; Leadbeater, R.; Guarro Fl J.; Lecocq, V.; Piehler, G.; Kozok, J.; Sollecchia, U.; Bryssinck, E.; Buil, C.; Martin, J.; Desnoux, V.; Heathcote, B.; Cacella, P.; Bertrand, G.; Broussat, J.J.; Ventura, A.; Diz, R.; Blais, A.; Somogyi, P.; Thizy, O.; Garde, O.; Charbonnel, S.; Le D P.; Mulato, L.; Petit, T.
source: Astronomy and Astrophysics;Volume;699;Issue;;Article No.;A82;
publisher: EDP Sciences
date: 01-01-2025
rights: All Open Access; Gold Open Access; Green Open Access
relation: ISSN: 46361; CODEN: AAEJA
format: online
language: English
type: Article
coverage: Labadie-Bartz J., LIRA, Observatoire de Paris, UniversitPSL, CNRS, Sorbonne Universit UniversitParis Cit CY Cergy Paris Universit Meudon, 92190, France; Carciofi A.C., Instituto de Astronomia, Geofica e Cicias Atmosficas, Universidade de S Paulo, Rua do Mat 1226, Cidade Universitia, SP, S Paulo, B-05508-900, Brazil; Rubio A.C., Instituto de Astronomia, Geofica e Cicias Atmosficas, Universidade de S Paulo, Rua do Mat 1226, Cidade Universitia, SP, S Paulo, B-05508-900, Brazil, Max-Planck-Institut f Astrophysik, Karl-Schwarzschild-Str. 1, Garching b. Mchen, 85748, Germany; Baade D., European Organisation for Astronomical Research in the Southern Hemisphere (ESO), Karl-Schwarzschild-Str. 2, Garching b. Mchen, 85748, Germany; Siverd R., Institute for Astronomy, University of Hawaii, 2680 Woodlawn, Honolulu, 96822, HI, United States; Arcos C., Instituto de Fica y Astronom, Facultad de Ciencias, Universidad de Valparao, Av. Gran Bretana 1111, Valparao, Chile; Figueiredo A.L., Instituto de Astronomia, Geofica e Cicias Atmosficas, Universidade de S Paulo, Rua do Mat 1226, Cidade Universitia, SP, S Paulo, B-05508-900, Brazil; NazY., Groupe d'Astrophysique des Hautes Energies, STAR, Universite de Liege, Quartier Agora (B5c, Institut d'Astrophysique et de Geophysique), All du 6 Ao 19c, Sart Tilman, Lie, 4000, Belgium; Neiner C., LIRA, Observatoire de Paris, UniversitPSL, CNRS, Sorbonne Universit UniversitParis Cit CY Cergy Paris Universit Meudon, 92190, France; Rivinius T., European Organisation for Astronomical Research in the Southern Hemisphere (ESO), Casilla 19001, Santiago, 19, Chile; Richardson N.D., Department of Physics and Astronomy, Embry-Riddle Aeronautical University, 3700 Willow Creek Rd, Prescott, 86301, AZ, United States; Nova S., Department of Physics and Astronomy, Embry-Riddle Aeronautical University, 3700 Willow Creek Rd, Prescott, 86301, AZ, United States; Pinho M.L., Instituto de Astronomia, Geofica e Cicias Atmosficas, Universidade de S Paulo, Rua do Mat 1…

https://archives.christuniversity.in/items/show/22612
title: Euclid: Early Release Observations of ram-pressure stripping in the Perseus cluster: Detection of parsec-scale star formation within the low surface brightness stripped tails of UGC 2665 and MCG +07-07-070
subject: Galaxies: clusters: intracluster medium; Galaxies: evolution; Galaxies: spiral; Galaxies: star formation
description: Euclid is delivering optical and near-infrared imaging data over 14 000 deg2 on the sky at spatial resolution and surface brightness levels that can be used to understand the morphological transformation of galaxies within groups and clusters. Using the Early Release Observations (ERO) of the Perseus cluster, we demonstrate the capability offered by Euclid in studying the nature of perturbations for galaxies in clusters. Filamentary structures are observed along the discs of two spiral galaxies, UGC 2665 and MCG +07-07-070, with no extended diffuse emission expected from tidal interactions at surface brightness levels of a30 mag arcseca 2. The detected features exhibit a good correspondence in morphology between optical and near-infrared wavelengths, with a surface brightness of a25 mag arcseca 2, and the knots within the features have sizes of a 100 pc, as observed through IE imaging. Using the Euclid, CFHT, UVIT, and LOFAR 144 MHz radio continuum observations, we conducted a detailed analysis to understand the origin of the detected features. We constructed the Euclid IEaYE, YEaHE, and CFHT u ar, g ai colour-colour plane and show that these features contain recent star formation events, which are also indicated by their H? and NUV emissions. Euclid colours alone are insufficient for studying stellar population ages in unresolved star-forming regions, which require multi-wavelength optical imaging data. There are features with red colours that can be explained by dust being stripped along with the gas in these regions. The morphological shape, orientation, and mean age of the stellar population, combined with the presence of extended radio continuum cometary tails can be consistently explained if these features formed during a recent ram-pressure stripping event. This result further confirms the exceptional qualities of Euclid in the study of galaxy evolution in dense environments. 2025 EDP Sciences. All rights reserved.
creator: George, K.; Boselli, A.; Cuillandre, J.-C.; Kmel, M.; Lann, A.; Bellhouse, C.; Saifollahi, T.; Mondelin, M.; Bolzonella, M.; Joseph, P.; Roberts, I.D.; Van Weeren, R.J.; Liu, Q.; Sola, E.; Urbano, M.; Baes, M.; Peletier, R.F.; Klein, M.; Davies, C.T.; Zinchenko, I.A.; Sorce, J.G.; Poulain, M.; Aghanim, N.; Altieri, B.; Amara, A.; Andreon, S.; Auricchio, N.; Baccigalupi, C.; Baldi, M.; Balestra, A.; Bardelli, S.; Battaglia, P.; Biviano, A.; Bonino, D.; Branchini, E.; Brescia, M.; Brinchmann, J.; Camera, S.; Cas-Herrera, G.; Capobianco, V.; Carbone, C.; Carretero, J.; Casas, S.; Castellano, M.; Castignani, G.; Cavuoti, S.; Chambers, K.C.; Cimatti, A.; Colodro-Conde, C.; Congedo, G.; Conselice, C.J.; Conversi, L.; Copin, Y.; Courbin, F.; Courtois, H.M.; Cropper, M.; Da Silva, A.; Degaudenzi, H.; De Lucia, G.; Di Giorgio, A.M.; Dole, H.; Douspis, M.; Dubath, F.; Dupac, X.; Dusini, S.; Escoffier, S.; Farina, M.; Faustini, F.; Ferriol, S.; Fotopoulou, S.; Frailis, M.; Franceschi, E.; Galeotta, S.; Gillis, B.; Giocoli, C.; Gracia-Carpio, J.; Grazian, A.; Grupp, F.; Haugan, S.V.H.; Holmes, W.; Hook, I.M.; Hormuth, F.; Hornstrup, A.; Hudelot, P.; Jahnke, K.; Jhabvala, M.; Keihen, E.; Kermiche, S.; Kiessling, A.; Kubik, B.; Kunz, M.; Kurki-Suonio, H.; Le Brun, A.M.C.; Le Mignant, D.; Ligori, S.; Lilje, P.B.; Lindholm, V.; Lloro, I.; Mainetti, G.; Maino, D.; Maiorano, E.; Mansutti, O.; Marggraf, O.; Markovic, K.; Martinelli, M.; Martinet, N.; Marulli, F.; Massey, R.; Maurogordato, S.; Medinaceli, E.; Mei, S.; Mellier, Y.; Meneghetti, M.; Merlin, E.; Meylan, G.; Mohr, J.J.; Mora, A.; Moresco, M.; Moscardini, L.; Nakajima, R.; Neissner, C.; Nichol, R.C.; Niemi, S.-M.; Nightingale, J.W.; Padilla, C.; Paltani, S.; Pasian, F.; Pedersen, K.; Percival, W.J.; Pettorino, V.; Pires, S.; Polenta, G.; Poncet, M.; Popa, L.A.; Pozzetti, L.; Raison, F.; Rebolo, R.; Renzi, A.; Rhodes, J.; Riccio, G.; Romelli, E.; Roncarelli, M.; Rossetti, E.; Saglia, R.; Sakr, Z.; Sapone, D.; Sartoris, B.; Sc…
source: Astronomy and Astrophysics;Volume;701;Issue;;Article No.;A40;
publisher: EDP Sciences
date: 01-01-2025
rights: All Open Access; Gold Open Access; Green Open Access
relation: ISSN: 46361; CODEN: AAEJA
format: online
language: English
type: Article
coverage: George K., University Observatory, LMU, Faculty of Physics, Scheinerstrasse 1, Munich, 81679, Germany; Boselli A., Aix-Marseille Universite, CNRS, CNES, LAM, Marseille, France; Cuillandre J.-C., UniversitParis-Saclay, UniversitParis Cite, CEA, CNRS, AIM, Gif-sur-Yvette, 91191, France; Kmel M., Universits-Sternwarte Mchen, Fakult f Physik, Ludwig-Maximilians-Universit Mchen, Scheinerstrasse 1, Mchen, 81679, Germany; Lann A., Universitde Strasbourg, CNRS, Observatoire Astronomique de Strasbourg, UMR 7550, Strasbourg, 67000, France; Bellhouse C., School of Physics and Astronomy, University of Nottingham, University Park, Nottingham, NG7 2RD, United Kingdom; Saifollahi T., Universitde Strasbourg, CNRS, Observatoire Astronomique de Strasbourg, UMR 7550, Strasbourg, 67000, France; Mondelin M., UniversitParis-Saclay, UniversitParis Cite, CEA, CNRS, AIM, Gif-sur-Yvette, 91191, France; Bolzonella M., INAF, Osservatorio di Astrofisica e Scienza Dello Spazio di Bologna, Via Piero Gobetti 93/3, Bologna, 40129, Italy; Joseph P., Indian Institute of Astrophysics, Koramangala II Block, Bangalore, 560034, India, Department of Physics and Electronics, CHRIST (Deemed to Be University), Bangalore, 560029, India; Roberts I.D., Waterloo Centre for Astrophysics, University of Waterloo, Waterloo, N2L 3G1, ON, Canada; Van Weeren R.J., Leiden Observatory, Leiden University, Einsteinweg 55, Leiden, 2333 CC, Netherlands; Liu Q., Leiden Observatory, Leiden University, Einsteinweg 55, Leiden, 2333 CC, Netherlands; Sola E., Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge, CB3 0HA, United Kingdom; Urbano M., Universitde Strasbourg, CNRS, Observatoire Astronomique de Strasbourg, UMR 7550, Strasbourg, 67000, France; Baes M., Sterrenkundig Observatorium, Universiteit Gent, Krijgslaan 281 S9, Gent, 9000, Belgium; Peletier R.F., Kapteyn Astronomical Institute, University of Groningen, PO Box 800, Groningen, 9700 AV, Netherlands; Klein M., Ludwig-Maximilians-University, Schel…

Probing the formation of megaparsec-scale giant radio galaxies II. Continuum and polarization behavior from magneto-hydrodynamic simulations
subject: galaxies: active; galaxies: groups: general; galaxies: jets; magnetohydrodynamics (MHD); methods: numerical
description: Context. The persistence of radiative signatures in giant radio galaxies (GRGs & 700 kpc) remains a frontier topic of research, with contemporary telescopes revealing intricate features that require investigation. Aims. This study aims to examine the emission characteristics of simulated GRGs, and correlate them with their underlying three-dimensional dynamical properties. Methods. Sky-projected continuum and polarization maps at 1 GHz were computed from five 3D relativistic magnetohydrodynamical (RMHD) simulations by integrating the synthesized emissivity data along the line of sight, with the integration path chosen to reflect the GRG evolution in the sky plane. The emissivities were derived from these RMHD simulations, featuring FR-I and FR-II jets injected at different locations of the large-scale environment and with propagation along varying jet frustration paths. Results. Morphologies, such as widened lobes from low-power jets and collimated flows from high-power jets, are strongly shaped by the triaxiality of the environment, resulting in features such as wings and asymmetric cocoons, thereby making morphology a crucial indicator of GRG formation mechanisms. The decollimation of the bulk flow in GRG jets gives rise to intricate cocoon features, most notably filamentary structuresmagnetically dominated threads with lifespans of a few mega-year. High jet power cases frequently display enhanced emission zones at mid-cocoon distances (alongside warmspots around the jet head), contradicting the interpretations of the GRG as a restarting source. In such cases, examining the lateral intensity variation of the cocoon may reveal the sources state, with a gradual decrease in emission suggesting a low active stage. This study highlights that applying a simple radio powerjet power relation to a statistical GRG sample is unfeasible, as it depends on growth conditions of individual GRGs. Effects such as inverse-Compton cooling due to cosmic microwave background photons an…
creator: Giri, Gourab; Fendt, Christian; Bagchi, Joydeep; Thorat, Kshitij; Saikia, Dhruba J.; Deane, Roger P.; Delhaize, Jacinta
source: Astronomy and Astrophysics;Volume;703;Issue;;Article No.;A214;
publisher: EDP Sciences
date: 01-01-2025
rights: All Open Access; Gold Open Access
relation: ISSN: 46361; CODEN: AAEJA
format: online
language: English
type: Article
coverage: Giri G., Istituto Nazionale di Astrofisica (INAF), Istituto di Radioastronomia (IRA), via Gobetti 101, Bologna, 40129, Italy, Department of Physics, University of Pretoria, Private Bag X20, Hatfield, 0028, South Africa; Fendt C., Max Planck Institute for Astronomy, Kigstuhl 17, Heidelberg, D-69117, Germany; Bagchi J., Department of Physics and Electronics, Christ University, Hosur Road, Bangalore, 560029, India; Thorat K., Department of Physics, University of Pretoria, Private Bag X20, Hatfield, 0028, South Africa; Saikia D.J., Inter-University Centre for Astronomy and Astrophysics, Post Bag 4, Pune, 411007, India; Deane R.P., Department of Physics, University of Pretoria, Private Bag X20, Hatfield, 0028, South Africa, Wits Centre for Astrophysics, School of Physics, University of the Witwatersrand, 1 Jan Smuts Avenue, Johannesburg, 2000, South Africa; Delhaize J., Department of Astronomy, University of Cape Town, Private Bag X3, Rondebosch, 7701, South Africa

Examining humanized bot interaction for the retail revenue growth
subject: Chatbot; Continuous purchase; Price; Revenue; Trust
description: The increasing popularity of conversational artificial intelligence (chatbot) in retail has fuelled consumer purchase decisions. The present study measures humanbot interaction through anthropomorphism, social presence, personalization, media richness, and its role in customer engagement and continuous purchase intention for retail revenue growth. Data were collected from 366 respondents and analyzed using PLS-SEM-ANN integrated approach. To overcome the limitation of establishing only the linear relationship among variables for prediction, the study deploys nonlinear complex artificial neural network (ANN) models to determine the relative importance of the significant predictors identified through structural equation modeling (PLS-SEM). The findings of the study confirm the role of anthropomorphism, personalization, and media richness in customer engagement and customer engagement leading to continuous purchase intention. Furthermore, Chatbots in the electronic commerce space strengthen involvement, but trust and price fairness also play a positive moderating influence in shaping consumer purchase intentions. Study implications highlight the role of anthropomorphic design in the desired social presence for sustained engagement and its contribution to revenue. This study enriches the AI literature and guides organizations leveraging chatbots to create more natural and personalized interactions so retailers can better meet customer needs, foster loyalty, and stay competitive in an increasingly digital marketplace. The Author(s), under exclusive licence to Springer Nature Limited 2025.
creator: Kumar, Nishant; Garg, Pratibha; Gupta, Neha; Upreti, Kamal
source: Journal of Revenue and Pricing Management;Volume;25;Issue;1;pp.25-40
publisher: Palgrave Macmillan
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 14766930;
format: online
language: English
type: Article
coverage: Kumar N., School of Business and Management, CHRIST University, Bangalore, India; Garg P., Amity School of Business, Amity University, Noida, India; Gupta N., Amity School of Business, Amity University, Noida, India; Upreti K., Department of Computer Science, CHRIST University, Delhi NCR, Ghaziabad, India

Generative AI: fuelling e-commerce revenue growth
subject: Dynamic capabilities; GenAI; PLS-SEM; Socio-technical system
description: Generative AI (GenAI) is a novel technology that has transformed businesses across various industries. E-commerce companies are increasingly using cutting-edge technologies, such as GenAI, that could drive revenue growth. This study leverages the lens of social-technical systems and dynamic capabilities theories to examine how e-commerce companies adopt GenAI and its subsequent impact on their revenue generation capabilities. This study investigated the factors influencing the adoption of GenAI in e-commerce companies. This study considers both Social factorstop management support, organizational readiness, competitive pressure, and vendor support) and Technical factors (security concerns, technological readiness, and AI explainability). Further, it investigates how the use of GenAI affects the development of technological capabilities and leads to financial performance, particularly in sales growth, revenue generation, profitability, and cost reduction. To validate the proposed model, we surveyed e-commerce company managers and analyzed the collected data using PLS-SEM. These findings offer valuable insights for e-commerce companies and their managers, enabling them to leverage GenAI for revenue generation. This novel study makes a significant contribution to the academic understanding of GenAI adoption and how it can be adopted for successful revenue generation. The Author(s), under exclusive licence to Springer Nature Limited 2025.
creator: Sivathanu, Brijesh; Pillai, Rajasshrie
source: Journal of Revenue and Pricing Management;Volume;25;Issue;1;pp.93-108
publisher: Palgrave Macmillan
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 14766930;
format: online
language: English
type: Article
coverage: Sivathanu B., School of Business and Management, Christ University, Karnataka, Bangalore, India; Pillai R., Chandragupt Institute of Management Patna, Bihar, Patna, India

Hybrid Analytical-Machine Learning Framework for SH-Wave Dispersion in Piezo-Flexoelectric Layered Structures with Imperfect Interfaces
subject: Imperfect interfaces; Machine learning surrogates; Physics-informed neural networks; Piezo-flexoelectricity; Shear-horizontal waves; Surface acoustic wave (SAW)/micro-electro-mechanical systems (MEMS) applications
description: This study presents a hybrid analytical-machine learning (ML) framework for modeling shear-horizontal (SH) wave propagation in piezo-flexoelectric (PFE) layered structures with imperfect interfacial bonding. The governing dispersion relations were derived using mechanical, electrical, and flexoelectric continuity conditions, establishing explicit links among phase velocity, wave number, layer thickness ratio, and flexoelectric coefficients. Analytical results revealed that nanoscale flexoelectricity and interfacial imperfections significantly influence wave behavior: electrically open (EO) boundaries amplify electromechanical coupling and enhance dispersion, whereas electrically shorted (ES) conditions suppress these effects, leading to reduced phase velocities. To address the computational cost associated with evaluating high-dimensional parametric spaces, ML surrogate models were incorporated. Convolutional neural network (CNN) and k-nearest neighbor (KNN) regressors accurately reproduced analytical dispersion surfaces with errors below 3% and drastically reduced computation time by more than two orders of magnitude. Classification models provided >90% accuracy in distinguishing EO and ES boundary-condition regimes, and generative artificial intelligence (AI) variational autoencoder/generative adversarial network (VAE/GAN) architectures successfully synthesized dispersion surfaces for previously unseen flexoelectric parameter ranges. The proposed hybrid framework combines the physical rigor of analytical modeling with the efficiency of modern ML surrogates, enabling rapid parametric exploration and high-fidelity prediction of SH-wave characteristics. The outcomes support accelerated design of advanced surface acoustic wave (SAW) devices, micro-electro-mechanical systems (MEMS) components, and nanoscale electromechanical systems. Future work will extend the approach to experimental validation and uncertainty-aware modeling for real-world applications. 2026 American…
creator: Seema; Singhal, Abhinav
source: Journal of Engineering Mechanics;Volume;152;Issue;6;Article No.;4026020;
publisher: American Society of Civil Engineers (ASCE)
date: 01-01-2026
rights: Restricted Access; Hardcopy may be available in the library
relation: ISSN: 7339399;
format: online
language: English
type: Article
coverage: Seema, Dept. of Mathematics, Christ Univ., Bengaluru, Karnataka, 560029, India; Singhal A., Dept. of Mathematics, Christ Univ., Bengaluru, Karnataka, 560029, India