Browse Items (11810 total)
Sort by:
-
Zone based relative density feature extraction algorithm for unconstrained handwritten numeral recognition /
Journal of Theoretical and Applied Information Technology, Vol.64, Issue 1, pp.304-314, ISSN No: 1992-8645 (Print), 1817-3195 (Online) -
Selective subset of relative density feature extraction algorithm for unconstrained single connected handwritten numeral recognition /
Australian Journal of Basic and Applied Sciences, Vol.8, Issue 6, pp.315-321, ISSN No: 1991-8178. -
Optimization of graded catalyst layer to enhance uniformity of current density and performance of high temperature-polymer electrolyte membrane fuel cell
The optimal use of catalyst materials is essential to improve the performance, durability and reduce the overall cost of the fuel cell. The present study is related to spatial distributions of current and overpotential for various graded catalyst structures in a high temperature-polymer electrolyte membrane fuel cell (HT-PEMFC). The effect of catalyst gradient across the catalytic layer (CL) thickness and along the channel and their combination on cell performance and catalyst utilization is investigated. The graded catalytic structure comprises two, three, or multiple layers of catalyst distribution. For a total cathode catalyst loading of 0.35 mg/cm2, higher loading near the membrane presents improved cell performance and catalyst utilization due to reduced limitations caused by oxygen and ion diffusions. However, non-uniformity in the current distribution is significantly increased. The increase in the catalyst loading along the reactant flow provides a substantially uniform current density but lower cell performance. The synergy of varying catalytic profiles across the CL thickness and along the cathode flow direction is investigated. The results emphasize the importance of a rational design of cathode structure and mathematical functions as a strategic tool for functional grading of a CL towards improved uniform current distribution and catalyst utilization. 2021 Hydrogen Energy Publications LLC -
Spatial analysis of CO poisoning in high temperature polymer electrolyte membrane fuel cells
The improved tolerance of the High Temperature-Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC) to CO allows the use of reformate as an anode feed. However, the presence of several per cent of CO in the reformate, which is inevitable particularly in on-board reformation in automobiles, which otherwise demands complex systems to keep the CO level very low, will significantly lower the cell performance, especially when the HT-PEMFC is operated at 160 C or below. In this study, a three-dimensional, non-isothermal numerical model is developed and applied to a single straight-channel HT-PEMFC geometry. The model is validated against the experimental data for a broad range of current densities at different CO concentration and operating temperatures. A significant spatial variation in current density distribution is observed in the membrane because the CO sorption is a spatially non-homogeneous process depending on local operating conditions and dilution of the H2 stream. To investigate the local spatial effects on HT-PEMFC operation, the model is applied to a real cell of size 49.4 cm2 with an 8-pass serpentine flow-field at the anode and the cathode. The membrane and anode catalyst layer are segmented into 5 array to investigate the spatial resolution of the polarization curves, H2 concentration, current density, and anode polarization loss. The simulation results show that the presence of CO in the anode feed reduces cell performance, however, the results reveal that uniformity in current density distribution in the membrane improves when the cell is operated in potentiostatic mode. The results are discussed in detail with the help of several line plots and multi-dimensional contours. The study also emphasizes on the importance of optimizing the reformate anode feed rate to improve cell performance. 2020 Hydrogen Energy Publications LLC -
FORMATION OF REDDY IDENTITY IN SOUTHERN KARNATAKA 1900-2000 CE
Reddy is the name of a socio-economically and politically dominant community found in Southern India. Today one of the largest single community grouping in south India in general and Andhra Pradesh in particular is Reddy community. They are generally considered traditional village headmen. They had a remarkable history since the period of shatavahanas of 2nd century BCE and the various people from this community have helped people in large way throughout the period and they are socially committed and economically enterprise. Historically the people of the Reddy community had appears some were very wealthy Landowners and Businessmen. Famous Kings, Awardees, Academics, Scientists & Civil Servants, Business Leaders & Entrepreneurs, famous Politicians, Entertainers & Film Professionals, Freedom Fighters, Activists & Philanthropists, Poets and Writers and many more. Though the community regarded their ancestors belongs Andhra Pradesh Telugu as their mother tongue, they assimilated with the regional culture of Karnataka and became proficient in Kannada language too. The community played major role in political arena and became one among the makers of modern Karnataka. Since 1900 their Political identity was expressed through political associations, Freedom movement, and backward class movement and pressurizing for establishment responsible government in Mysore region. Socially the community has been identified as an important caste in south India. The marriage ceremony is sanctified through the authorization of Brahmana, Dasayya. The community has the complex setup within itself because they are in large number. They have peculiar social practices of the appreciation of Brahmanical ideas and process of sankritization is rooted in the original beliefs of Reddy community, The Practice of bride price, widow remarriage, the Brahmin priest not invite to their marriage occasion by some sub castes and many more. The community extended its liberal attitude towards improving the status of women has resulted in arising of many women as industrialists, artists, scientists, physicians, realtors, sports persons and scholars. Economically they are committed to land and agriculture. Culturally the community has predominant followers of the Hinduism with Veerashaiva, Vaishnava and Shaktha sects as the most important faiths. Their annual pilgrimage is to the temple of Shrishaila Mallikarjuna. Yogi VemanaReddy and HemaReddy Mallama were as the legends. The Brahmanical idenitity is not observed and accepted by all denomination of Reddys. The ??Guru Paramapare also exists among the Reddy communities. Each sub caste has to pay their homage to their respective Gurus, who preside over the Matha. The festivals celebrated by the community like Bandi Devara Habba and Makkala Dyavaru are the most specific ones. It has to be accepted as liberation from some hierarchical control and assertion of a community attempting to carve a certain niche status which resulted in a form of monastic tradition or Gurupeeta tradition since the last two decade in Karnataka. Being the promoters of education and literature they established schools, colleges, training centers, hostels and study centers. They are socially advanced, economically developed, politically organized and culturally established. Thus they become influential factor in formation of social-political-economic identity in southern Karnataka. -
Investigation on the phase transformation and lattice parameters of Sn2+, Cu2+, La3+ and Ce4+ ions doped titania: characterization and solar light activity study /
International Journal For Light And Electron Optics, Vol.183, pp.496-507, ISSN No: 0030-4026. -
Microscopic, pharmacognostic and phytochemical screening of Epiphyllum oxypetalum (dc) haw leaves /
Journal of Pharmacognosy And Phytochemistry, Vol.7, Issue 6, pp.972-980, ISSN No: 2349-8234. -
Dynamic linkage among crude oil, exchange rates and P/E ratio: The case of India /
International Journal of Pure And Applied Mathematics, Vol.119, Issue 18, pp.1-14, ISSN No: 1314-3395. -
Polymer-nanocarbon composites: a promising strategy for enhanced performance of organic solar cells
The exigency for sustainable and clean energy resources has led to profound research in development of various generations of solar cells, aiming to control the over-exploitation of fossil fuels and subsequently limit environmental degradation. Among the fast-emerging third-generation solar cells, polymer solar cell technology has gained much consideration due to its potential for achieving economically feasible, lightweight, flexible solar energy harvesting devices. As a predominant research area, at present, the major concerns regarding polymer solar cells include improving conversion efficiency, enhancing absorption bandgap in polymers, limiting photochemical degradation, and remediating low dielectric constant. Nanocarbon materials can be effectively blended with polymers and have been widely reported to enhance the performance of polymer solar cells owing to their desirable characteristics like high electrical conductivity, mechanical strength, thermal stability, non-toxicity, large specific surface area, flexibility, and optical transparency. In this review, we briefly discuss various conjugated polymer-nanocarbon composites, including polymer/graphene derivatives, polymer/graphene quantum dots (GQD), and polymer/carbon nanotubes (CNTs), elucidating their roles in the performance enhancement of polymer solar cells (PSCs). Graphical abstract: (Figure presented.). The Author(s) 2023. -
A Compact Super Wideband Antenna with Controllable Dual Notch Band Capability
In this paper, a novel super wideband (SWB) antenna with dual band notch capability is designed and analyzed for wide band applications. The proposed antenna consists of a pentagonal shaped radiator, beveled-shaped partial ground plane with slot and U-shaped parasitic strips. The beveled-shaped defected ground structure with rectangular slot helps to realize wideband characteristics from 2.4 to 28.2 GHz. Independent control of the notch band's center frequency and bandwidth is achieved by using U-shaped parasitic strips. This key feature is achieved in the WiMAX (3.3 to 3.7 GHz) and WLAN (5.1 to 5.9 GHz) bands. Furthermore, it exhibits a stable radiation pattern and offers acceptable gain over the entire operating bandwidth with sharp decrease in gain at the notches. The percentage bandwidth of 169% is achieved with a bandwidth dimension ratio (BDR) of 6986. Group delay is less than 1 ns in the entire operating bandwidth except at the notch bands. The measured reflection and radiation characteristics of fabricated SWB antenna are in good agreement with the simulation results. The proposed antenna has the advantage of simple design and compact size with an overall dimension of 18 x 21 x 1.6 mm3. The performance of the proposed antenna is superior compared to reported antenna designs in terms of controllable sharp notches and size for the bandwidth achieved. 2022 IAMOT -
Single Port Multimode Reconfigurable UWB-NB Antenna for Cognitive Radio Applications
In this paper, a compact, single port, multimode reconfigurable UWB-NB antenna with a novel feeding network is presented. The proposed antenna consists of a pentagonal-shaped monopole radiator, a beveled-shaped partial defected ground plane with a rectangular slot, and a reconfigurable bypass feeding network. The antenna realizes a wideband frequency range from 2.4 to 18 GHz and four narrow band frequency ranges, 5.3 to 6.8 GHz, 6.0 to 7.6 GHz, 7.2 to 8.8 GHz and 8.4 to 11.4 GHz. The antenna provides an omnidirectional radiation pattern with gain from 2.2 to 6.2 dBi maximum at 12 GHz and voltage standing wave ratio (VSWR) ranges from 1 to 2. The fabricated antenna has an overall dimension of 181.6 mm3. Sensing and tuning ranges of the fabricated antenna shows good agreement with the simulation results. The proposed antenna has an advantage of simple design, low profile, single port excitation and omnidirectional radiation pattern making it suitable for applications such as handheld mobile cognitive radio systems. 2022 SBMO/SBMag -
Relationships between Ultrasonographic Placental Thickness in the Third Trimester and Foetal Outcomes
Poor neonatal outcomes, including low birth weight (LBW), poor APGAR scores, more NICU hospitalizations, and a higher chance to develop Pre-Eclampsia, IUGR, and Oligo Hydramnios, are all linked to thin placental thickness. While both thin and thick placentae are connected to a greater prevalence of C-sections, thick placentae are linked with a greater possibility of developing GDM and an increase in NICU hospitalizations. Objective of this research was to investigate the association between placental thickness as measured by ultrasonography in the third trimester and foetal outcome, including the relationship between placental histopathology and placental thickness. investigate the link among placental thickness, foetal outcome, and placental histology. Most newborns had fibrinoid necrosis and calcifications. Babies with Macrosomia and IUGR, respectively, were more likely to develop Syncytial knots and thickening of the vessel wall. Patients with normal placenta thickness at 36 weeks' gestation experienced fewer difficulties than those with thin or thick placentas at the same time. The study emphasizes the value of evaluating placental thickness using ultrasound in the third trimester to detect high-risk pregnancies. The study also shows that aberrant foetal and neonatal events are linked to certain placental histological characteristics, like artery wall thickening and infarctions. RJPT All right reserved. -
Predicting Crude Oil Future Price Using Traditional and Artificial Intelligence-Based Model: Comparative Analysis
Crude oil is an imperative energy source for the global economy. The future value of crude oil is challenging to anticipate due to its nonstationarity in nature. The focus of this research is to appraise the explosive behavior of crude oil during 20072022, including the most recent influential crisis COVID-19 pandemic, to forecast its prices. The crude oil price forecasts by the traditional econometric ARIMA model were compared with modern Artificial Intelligence (AI)based Long Short-Term Memory Networks (ALSTM). Root mean square error (RMSE) and mean average percent error (MAPE) values have been used to evaluate the accuracy of such approaches. The results showed that the ALSTM model performs better than the traditional econometric ARIMA forecast model while predicting crude oil opening price on the next working day. Crude oil investors can effectively use this as an intraday trading model and more accurately predict the next working day opening price. 2023 World Scientific Publishing Co. Pte Ltd. All rights reserved. -
Data Science in the Medical Field
Data science has the potential to influence and improve fundamental services such as the healthcare sector. This book recognizes this fact by analyzing the potential uses of data science in healthcare. Every human body produces 2 TB of data each day. This information covers brain activity, stress level, heart rate, blood sugar level, and many other things. More sophisticated technology, such as data science, allows clinicians and researchers to handle such a massive volume of data to track the health of patients. The book focuses on the potential and the tools of data science to identify the signs of illness at an extremely early stage. 2025 Elsevier Inc. All rights are reserved including those for text and data mining AI training and similar technologies. -
AGRI 4.0 AND THE FUTURE OF CYBER-PHYSICAL AGRICULTURAL SYSTEMS
Agri 4.0 and the Future of Cyber-Physical Agricultural Systems is the first book to explore the potential use of technology in agriculture with a focus on technologies that enable the reader to better comprehend the full range of CPS opportunities. From planning to distribution, CPS technologies are available to impact agricultural output, delivery, and consumption. Specific sections explore ways to implement CPS effectively and appropriately and cover digitalization of agriculture, digital computers to assist the processes of agriculture with digitized data and allied technologies, including AI, Computer Vision, Big data, Block chain, and IoT. Other sections cover Agri 4.0 and how it can digitalize, estimate, plan, predict, and produce the optimum agricultural inputs and outputs required for commercial purposes. The global team of authors also presents important insights into promising areas of precision agriculture, autonomous systems, smart farming environment, smart production monitoring, pest detection and recovery, sustainable industrial practices, and government policies in Agri 4.0. 2024 Elsevier Inc. All rights are reserved including those for text and data mining AI training and similar technologies. -
An IoT-based agriculture maintenance using pervasive computing with machine learning technique
Purpose: In cultivation, early harvest offers farmers an opportunity to increase production while decreasing the chances of lower crop production rates, ensuring that the economy remains balanced. The significant reason is to predict the disease in plants and distinguish the type of syndrome with the help of segmentation and random forest optimization classification. In this investigation, the accurate prior phase of crop imagery has been collected from different datasets like cropscience, yesmodes and nelsonwisc. In the current study, the real-time earlier state of crop images has been gathered from numerous data sources similar to crop_science, yes_modes, nelson_wisc dataset. Design/methodology/approach: In this research work, random forest machine learning-based persuasive plants healthcare computing is provided. If proper ecological care is not applied to early harvesting, it can cause diseases in plants, decrease the cropping rate and less production. Until now different methods have been developed for crop analysis at an earlier stage, but it is necessary to implement methods to advanced techniques. So, the detection of plant diseases with the help of threshold segmentation and random forest classification has been involved in this investigation. This implemented design is verified on Python 3.7.8 software for simulation analysis. Findings: In this work, different methods are developed for crops at an earlier stage, but more methods are needed to implement methods with prior stage crop harvesting. Because of this, a disease-finding system has been implemented. The methodologies like Threshold segmentation and RFO classifier lends 97.8% identification precision with 99.3% real optimistic rate, and 59.823 peak signal-to-noise (PSNR), 0.99894 structure similarity index (SSIM), 0.00812 machine squared error (MSE) values are attained. Originality/value: The implemented machine learning design is outperformance methodology, and they are proving good application detection rate. 2021, Emerald Publishing Limited. -
COVID-19 outbreak prediction using quantum neural networks
Artificial intelligence has become an important tool in fight against COVID-19. Machine learning models for COVID-19 global pandemic predictions have shown a higher accuracy than the previously used statistical models used by epidemiologists. With the advent of quantum machine learning, we present a comparative analysis of continuous variable quantum neural networks (variational circuits) and quantum backpropagation multilayer perceptron (QBMLP). We analyze the convoluted and sporadic data of two affected countries, and hope that our study will help in effective modeling of outbreak while throwing a light on bright future of quantum machine learning. The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2021. -
Generative AI and its impact on creative thinking abilities in higher education institutions
Generative AI technologies such as ChatGPT have started gaining increased popularity among higher education institutions. Students, as well as teaching professionals, can utilize these tools for various academic purposes due to the immense benefits they provide by way of customization of data generated and ease of access to data. However, this chapter seeks to analyze how such tools may impact students' creative thinking ability. It also analyses the drawbacks faced by teachers after implementation of such tools. The methodology adopted for the study was two surveys: one administered to gather students' opinions and the other for understanding teachers' perspectives. The analysis of the data collected shows that the over-reliance of students on such generative AI tools might hinder students' ability to think creatively to some extent. The chapter also suggests some of the strategies that can be adopted by teachers to ensure students' capabilities are assessed accurately. 2024, IGI Global. All rights reserved.