Browse Items (16488 total)
Sort by:
-
Predicting Crude Oil Futures using Feed Forward Neural Networks and Technical Indicators: A Comparative Study on WTI and Brent
In the domains of economic management and energy analysis, forecasting the price of crude oil is increasing popularity. It is essential to the facilitating rapid and cost-effective development with improved quality. Accurate prediction of the crude oil market is essential for steady and fast economic development because of its enormous influence on the global economy and society. Moreover, precise crude oil price prediction aids the traders in making accurate decision to maximize profits. In this work, a machine learning method for forecasting future global price data for crude oil is provided based on past data. The proposed model consists of three phases: primarily, historical data of selected crude oil data are gathered and normalized using data normalization technique. Secondly, technical indicators are derived from the crude oil data. Finally, a Feed Forward Neural Network (FFNN) is designed and trained using these technical indicators to forecast the price of crude oil in the future. Daily, weekly, and monthly data from Brent crude oil and West Texas Intermediate (WTI) are used to evaluate the generated model's prediction ability. To find the most effective FFNN configuration, the model's efficacy is evaluated by adjusting hidden layer number and hidden neurons. Performance of the model is also analyzed by varying number of training and testing samples. The experimental outcomes demonstrates that the designed model exhibits excellent performance for both WTI and Brent data. Notably, the model proves to be effective in predicting crude oil prices, when technical indicators are used as input variables. 2026 IEEE. -
A Spiking Neural Network Approach to Electroencephalography based Consumer Preference Modeling
Neuromarketing is an emerging interdisciplinary field that applies neuropsychology in marketing to study consumer sensory-motor actions such as cognitive and affective responses to marketing stimuli through Brain Computer Interface (BCI) technology. While marketers spend over 750 billion dollars annually on traditional marketing procedures such as surveys, interviews, and consumers feedback, these methods are often criticized for their inability to capture genuine consumer preferences. Neuromarketing promises to overcome such issues by analyzing neural responses directly. This paper presents a novel framework for predicting consumer preferences by analyzing Electroencephalography (EEG) signals. EEG signals are acquired from 25 volunteers while administering 14 products with three different variations. The EEG signals are preprocessed using Modified Wavelet Thresholding (MWT) to remove noise while preserving neural activity patterns. A third-generation network, Spiking Neural Network (SNN) is designed to recognize consumer preferences based on EEG frequency bands. Unlike conventional models, SNN captures temporal dynamics through spike timing, which is crucial for EEG signals. The efficacy of the model is tested across individual EEG bands to identify the most influential frequency band in decision-making. Simulation outcomes demonstrate that the proposed model can effectively predict consumer preferences. The model achieved an accuracy of 90.91%, recall of 90.7%, a precision of 91.14%, a specificity of 91.12%, and an F1-score of 90.92%. The outcomes highlight the potential of EEG based neuromarketing systems to decode subconscious consumer responses, enabling brands and businesses to design more targeted marketing strategies based on objective neural data. 2025 Inventive Research Organization. -
Nanocarbon assisted green hydrogen production: Development and recent trends
The increasing consumption of energy and consequent fast depletion of fossil fuels and associated environmental challenges necessitate transformative innovations in the field of energy conversion. Owing to its exceptional energy density and zero emissions during combustion, Hydrogen is hailed as a promising source of clean and renewable energy that can replace fossil fuels in future energy conversion systems. Since Hydrogen is not readily available in the atmosphere, a variety of pathways have been followed for the evolution of Hydrogen from water and organic materials, which requires the involvement of catalysts to accelerate the reactions. Currently, noble metals and their alloys represent state-of-the-art materials for HER (Hydrogen Evolution Reaction), and the scarcity and high expense of such materials impose significant constraints on their widespread implementation in hydrogen production. In this context, nanocarbons and their composites for HER are worth exploring owing to their abundance, cost-effectiveness, eco-friendliness, exceptionally large surface-to-volume ratio, and excellent electrical and charge transfer properties. Here, three leading hydrogen production methods - biological, electrochemical, and photo-driven- are analyzed based on their characteristics, effectiveness, and limitations w.r.t. different nanocarbon materials. 2023 Hydrogen Energy Publications LLC -
Psychological capital and innovative work behaviour: The role of mastery orientation and creative self-efficacy
Continuous innovation is what helps companies survive the highly discontinuous competition. Securing innovative work behaviour from employees has drawn the attention of businesses and researchers alike. The current work draws on broaden-and-build theory and goal orientation theory to propose how an individual's psychological capital, which is malleable, helps in achieving innovative work behaviour from employees. The study has been conducted in the context of three-star hotels located in and around New Delhi, the capital of India. The data was collected using standard scales from a dyad of 229 employees and their managers. The present study enriches the innovative work behavior literature by combining different perspectives in a coherent framework and demonstrates the partially mediated positive relationship of psychological capital and innovative work behavior via mastery orientation. Also, the study reveals that the partially mediated indirect effect varies among employees based on their level of CSE. 2022 Elsevier Ltd -
Agriculture 4.0 and smart farming: Imperatives of scaling up innovation and farmer capabilities for sustainable business
Smart agriculture adoption during industry 4.0 is creating new scenarios to farmers across the world. Smart farming promotes not only an increase in the agricultural productivity and incomes, but also building resilience to climate change. Small business farmers had to look at all possible means to cope with the technology applications for implementation of agro-transformation agendas for improved production and business performance. Smart farmers have to make use of several technology applications like drones and satellites, IoT (Internet of Things) based sensors, block chain and big data, biotech, farm maintenance technology (optimising water usage, production, and innovation technology) for better agricultural practices. Though such aggrotech opportunities have demonstrated business improvements, how far such smart farming revolution is well received by the agribusiness owners are less researched into. Henceforth, the purpose of this research is to establish the relationship between aggrotech innovation capabilities and farmer's capabilities associated with agriculture firms and its contributions to business performance. Following cross-sectional descriptive study design, and purposive sampling, the study addressed 3 direct and 2 indirect relationships in the model, on 212 farmers. The data was collected from Selangor state of Malaysia. The study applied Smart PLS SEM to analyse the data. The results show that the innovation (technology) capability and farmer's (people) capability have a positive relationship on business performance. The study also shows the partial mediation effect of technology change on innovation capability and business performance as well as employee capability and business performance. The study is novel in its form by applying Resource Based View theory on Smart agriculture, extending possibilities of generalization agriculture sector. 2021 Ecological Society of India. All rights reserved. -
Design of body wearable antenna for medical monitoring devices
In this research work, an inset fed microstrip patch antenna, an analysis of its effect on human body and human body influence on antenna performance are presented. Polystyrene substrate (?r= 2.6) with a 1 mm thickness is used to create the proposed antenna. Use of HFSS Ver. 18.2 is made for simulations. The simulated antenna exhibits S11 of -37.4 dB in the absence of human arm and -28.39 dB in the presence. Similar to this, the SAR findings showed that the Specific Absorption Rate (SAR) value obtained is 1.28 W/kg, which is significantly less than the allowed standard of 2 W/kg, when the suggested antenna is set at an offset of 2 mm off the body's surface. Hence the proposed antenna can be suitable for integrating with medicalmonitoring devices. 2024 Author(s). -
Antenna Array with Non-Uniform Excitation and DNG Hybrid Metasurface for Next Generation Communication Equipment
This paper presents an approach for designing a hybrid metasurface array with nonuniform excitation. The proposed design features a unique feed network with minimal use of Quarter Wave Transformers (QWT's) to reduce the form-factor. The impedance matching between the feed network and the patch is achieved by adjusting the inset position and the gap between the patch and the feed. The metasurface consists of a hybrid metamaterial unit cell with five Split Ring Resonators (SRRs) on the bottom and a hexagonal ring made of six triangles on the top surface improves the bandwidth, gain and directivity of the proposed design. Equivalent circuit of the proposed array is modeled using ADS software. A prototype 1x4 array with metasurface is designed for a resonant frequency of 2.4 GHz and fabricated. A high gain of 9.46 dB with a -10 dB impedance bandwidth of 110 MHz is achieved, which amounts to an improvement of 16.36% gain and 31.58% bandwidth compared to conventional uniform excitation array. In terms of overall size, the proposed array antenna is reduced by 38.05% compared to traditional 1x4 microstrip array. 2021 IAMOT. All Rights Reserved. -
A Slotted Circular Patch Antenna with Defected Ground for Sub 6 GHz 5G Communications
In this paper, a slotted circular patch antenna with Defected Ground Structure (DGS) is presented. The slots created on radiating element and the defect introduced on the ground plane shifted the resonance frequency from 2.49 GHz to 1.17 GHz. This corresponds to 53% reduction in size at 1.17 GHz. The proposed antenna is designed on FR-4 substrate (r=4.4) with thickness of 1.6 mm. Simulations are carried out using HFSS Ver. 18.2. The simulated reflection coefficient of Circular Patch Antenna (CPA) at 2.49 GHz, Slotted Circular Patch antenna (SCPA) at 2.34 GHz and Slotted Circular Patch antenna with Defected Ground Structure (SCPA-DGS) at 1.17 GHz are - 28.7 dB, -31.33 dB and -11.03 dB respectively. For validating the simulated design, SCPA-DGS is fabricated and measured its reflection coefficient and VSWR using Vector Network Analyzer (Anritrsu S820E). The measured and simulated values are very well matched with each other. Therefore the proposed antennas may be used in sub 6 GHz 5G communication applications. 2022 IEEE. -
A miniaturized antenna array for direct air-to-ground communication of aircrafts
In this paper, a miniaturized, high directivity low-cost antenna array is presented. The uniqueness of the proposed array (PA) exists in the feed mechanism designed using Dolph-Chebyshev non-uniform excitations. Authors simulated the designed antenna array using ANSYS EM 18.2 (HFSS) software and characterization is carried out in a fully established anechoic chamber. The simulated array antenna is operating at 2.4 GHz with a gain of 8.12 dB and a reflection coefficient of -28.45 dB having a bandwidth of 110 MHz. On contrast with the traditional array (TA), PA exhibits enhanced resonance characteristics by maintaining the same radiation characteristics. The bandwidth is increased by 37.5%, maintaining the same gain of 8.12 dB. In contrast, there is a remarkable reduction in the size compared to the traditional corporate feed array antenna with non-uniform excitation. The overall size of the PA antenna is 242.5 mm 58.8 mm, which is 33.73% less compared to the TA. Published under licence by IOP Publishing Ltd. -
Performance analysis of optimized corporate-fed microstrip array for ISM band applications
This paper presents a low cost high gain corporate feed rectangular microstrip patch antenna array of two elements having cuttings at the corners, with detailed steps of design process, operates in Industrial Scientific Medical (ISM) band (2.4 GHz). The proposed antenna structures are designed using FR4 dielectric substrate having permittivity ?r= 44 and substrate thickness of 1.6 mm. The gain of these simulated antennas are obtained as 2.4819 dB with return loss of -17.779 dB for a single element patch and 6.3128 dB with return loss of -15.8320 dB for an array of two elements. The simulations have been carried out by using Antenna simulator HFSS version 15.0.0 to obtain the VSWR, return loss and radiation pattern. 2017 IEEE. -
Reflector Backed Conical Dielectric Resonator Antenna with Enhanced Gain
This paper reports a wideband, high gain, slot coupled reflector backed conical dielectric resonator antenna (DRA). The key findings of the work are as follows; i) the antenna operates over 7.73-8.3 GHz, with peak gain of 10.32 dBi, ii) an gain enhancement > 5dBi achieved by placing a reflector below the ground plane, iii) the measured results best matches with their measured counter parts, iv) the antenna deals with many advantages, including performance, volume, and fabrication feasibility. From application point of view the developed model can be successfully used for X-band wireless communication. 2018 IEEE. -
Inculcation of On- Campus Pet Companionship as an Animal- Assisted Therapeutic Intervention for the Psychological Well- Being of College Students
Research on developing coping strategies and therapeutic interventions is crucial for college students due to the seemingly unavoidable stressors they face as young adults. This chapter proposes the inclusion of on- campus pet companionship in higher educational institutions as an intervention to enhance distress tolerance, psychological resilience, and better- coping strategies among college students. It acknowledges existing research on pet companionship's positive effects on well- being while addressing the concerns about potential negative impacts. The study aims to explore the potential effects of pet companionship on college students, discuss methods for introducing on- campus pet companionship, and identify cost- effective and feasible approaches for implementation. 2024 by IGI Global. All rights reserved. -
A Comprehensive Research on Deep Learning Based Routing Optimization Algorithms in Software Defined Networks
Discovering an optimal routing in Software Defined Networks (SDNs) is challenging due to several factors like scalability issues, interoperability, reliability, poor configuration of controllers and security measures. The compromised SDN controller attacks at the control plane layer, packet losses in the topology and end-to-end delay are the most security risk factors in SDNs. To overcome this, in most of the existing researches, Deep Reinforcement Learning (DRL) algorithm with various optimization techniques was implemented for optimal routing in SDN by providing link weights to balance the end-to-end delay and packet losses. DRL used Deterministic Policy Gradient (DPG) method which acts as an actor-critic reinforcement learning agent that searches for an optimal policy to minimize the expected cumulative long-term reward. However, discovering an optimal routing with efficient security measures is still a major challenge in SDNs. This research proposes a detailed review of routing optimization algorithms in SDN using Deep Learning (DL) methods which supports the researchers in accomplishing a better solution for future research. 2023 IEEE. -
Effective View of Swimming Pool Using Autodesk 3ds Max: 3D Modelling and Rendering
As well as setting up the sources, working with editable poly, information in the interior of the swimming pool, using turbo-smooth and symmetry modifier, this procedure of making a 3D swimming pool model is clarified. The lighting the scene and setting up the rendering, the method in which substances are added to the replica is defined. The methods and techniques of rendering are defined, too. The final rendering is the result of multiple images being drawn. The aim of our research work is to create a swimming pool design with enhancing models with materials affect. The shapes used for that are cylinder, sphere, box, plane and splines. The modifiers are editable poly, editable spline and UVW map. Finally, we used a material editor and target lights for enhancing the model. 2022, The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. -
An optimized technique to foster omnichannel retail experience leveraging key technology dimensions in the context of an emerging digital market
Customers approach towards shopping has transformed, as a result of their reduced tolerance, increased technology usage and being well informed than ever before. As customers expect a seamless shopping experience regardless of where they are engaged within a retailers network, the line between physical and digital retailing is blurring. Retailers across the world are contemplating on transforming into Omnichannel hubs to deliver an elevated experience anytime anywhere. And, experts have often indicated that an Omnichannel strategy delivers a unified shopping experience than a mere channel experience. However, the true Omnichannel experience is still not evident in India with minimal action in this space, indicating a subverted outlook towards building necessary Omnichannel Capabilities. This paper examines the most essential and significant technology dimensions that are imperative towards fostering a seamless Omnichannel Retail Experience. The findings of this study serve as a basis for retailers in India to evaluate their strategies towards adopting these technology dimensions and respective capabilities, using an optimized approach. The study employed a quantitative research involving survey of executives from major retailers in India. The quantitative data was analyzed applying Structural Equation Modeling, to ascertain the technology dimensions that emerged and their significance in deriving Omnichannel Retail Experience. BEIESP. -
A Comprehensive Review on Image Restoration Methods due to Salt and Pepper Noise
Digital images are well-use in various fields like satellite communication, mobile communication, medical and security. Visualized information helps the people to understand the things easily by seen. Improper capturing, age of camera lens, imperfect storage and transmission leads to introduce noise in the image. Gaussian noise, salt and pepper/impulse noise and speckle noise may affect the original image due to aforementioned reasons. Out of these, impulse noise/salt and pepper noise is one of the major types, degrades the image with black and white spots it results loss of required information. Hence, restoration of ground- truth image from such type of noisy image is a challenging task to provide quality and clarity visuals to users. Several linear and non-linear methods have been proposed by researchers since more than four decades. Nonlinear methods based on; median filtering approach; adaptive median filter approach; median filter with switching condition; and median filter with rank order type; are proposed from early 1980s onwards. All of these operated directly on pixels in spatial domain. Hence, they are very easy to implement and most of them are not that much robust at middle and higher noise density circumstances. Further, various researchers have been implemented linear methods such as wavelet transform methods like SWT and DWT. Majority of these are works well upto 50% noise density conditions and very few works well on higher and multiple noise density conditions also. To overcome these problems CNNs based methods have been developed tremendously by various researchers from last decade and these methods require huge database to train the network model. Most of these, achieved good accuracy rates at higher and multiple noise conditions. Hence, here a detailed review report is presented on impulse noise removal methods with their Peak Signal to Noise Ratio (PSNR). 2023 IEEE. -
A new trained ECG signal Classification method using Modified Spline Activated Neural Network
An ECG (Electrocardiogram) records the electrical activity of the heart and assess heart arrhythmia. Cardiac arrhythmia is an irregular heartbeat caused by unbalanced rhythm. In the past, several works were developed to produce automatic ECG-based heartbeat classification methods. In this work, a modified spline activated neural network, a new approach for cardiac arrhythmia classification by presenting the ECG signal preprocessing, the heartbeat segmentation techniques, the feature description methods and the learning algorithms used. The MIT-BIH arrhythmia database was used and experimented for testing and training. 2018 IEEE. -
Friction and wear behaviour of HVOF sprayed Cr2O3-TiO2 coatings on aluminium alloy
This study investigates the tribological behaviour of Cr2O3-TiO2 composite coatings deposited on aluminium 6061 alloy. Cr2O3-TiO2 composite coatings were deposited by high velocity oxyfuel (HVOF) technique. Developed coatings were subjected to microstructure studies, microhardness test (ASTM E92), friction and wear test (ASTM G99). Pin-on-disc machine was used to evaluate friction and wear characteristics of Cr2O3-TiO2 coatings. Effect of sliding velocity (0.314 m/s-1.26 m/s) and load (20 N-100 N) on friction and wear characteristics of Cr2O3-TiO2 coatings were studied and compared with uncoated aluminium alloy. Results showed 54% improvement in hardness of Cr2O3-TiO2 coatings in comparison with aluminium alloy. Coefficient of friction and wear rate decreases by 12% and 48% respectively when evaluated with uncoated aluminium alloy. Coefficient of friction (COF) and wear rate increases with increase in load and sliding velocity for both coatings and substrate. However, Cr2O3-TiO2 coatings showed lower wear rate and COF at all the loads and sliding velocities studied when compared with uncoated aluminium alloy. Worn out surfaces of uncoated and Cr2O3-TiO2 coated surfaces were subjected to SEM analysis to understand the wear mechanisms in composite coatings. 2021 Inderscience Enterprises Ltd.. All rights reserved. -
Electrochemical behavior of cast and forged aluminum based in-situ metal matrix composites
The present work focuses on the electrochemical behaviour of Al6061 alloy and Al6061-TiB 2 in-situ metal matrix composites. Al6061-TiB 2 in-situ Composites were synthesized by a stir casting route at a temperature of 860C using potassium hexafluorotitanate (K 2 TiF 6 ) and potassium tetrafluoroborate (KBF 4 ) halide salts. Percentage of TiB 2 was kept at 0 wt% and 10wt%. The cast Al6061 alloy and Al6061-TiB 2 composites (0wt% &10wt %) were subjected to open die hot forging process at a temperature of 500C. Both cast and forged Al6061 alloy and its composites were subjected to micro-structural and electrochemical characterization. Corrosion behaviour of alloy and composites in both cast and forged conditions were evaluated using electrochemical impedance spectroscopy and the results were backed up by a potentiodynamic polarization test. Results indicate that addition of TiB 2 particles increases the corrosion rate and reduces the polarization resistance of aluminium alloy in both cast and forged condition owing to galvanic coupling between the reinforcements and base metal. Further, when compared with cast alloy and its composites, forged alloy and its composites exhibited poor corrosion resistance under identical test conditions. 2019 Author(s). -
A Comprehensive Study on Parametric Optimization of Plasma-Sprayed Cr2C3 Coatings on Al6061 Alloy
Plasma spray, a widely employed thermal spray method, is known for enhancing coatings with heightened microhardness, density, and bonding strength. In this study, Taguchis approach was applied to optimize processing parameters for plasma spray-coated surfaces, aiming to reduce porosity, increase hardness, and fortify the connection between Cr2C3 coatings. The design of experiments method facilitated the optimization of process parameters, utilizing signal-to-noise ratios and ANOVA analysis to assess the significance of each processing parameter and identify optimal parameter combinations. Powdered feed rate and stand-off distance emerged as the two most critical processing variables influencing permeability and hardness, contingent on signal-to-noise ratios. S/N ratio analysis was employed to determine the optimal processing parameters for permeability, hardness, and bonding strength. For porosity, the optimal stand-off distance, powdered feed rate, and current density were identified as 60rpm, 50g/min, and 460ampsmm/s, respectively. Exemplary process conditions for hardness included a powdered feed rate of 60g/min, a stand-off distance of 80rpm, and a current density of 480 amps. Lastly, for strength properties, the ideal process variables were a stand-off distance of 80rpm, a current density of 480amps, and a powdered feed rate of 60g/min. Despite small differences between projected R2 and modified R2 values in statistical data on permeability, hardness, and bonding strength, the proximity to the one emphasizing the fit of the linear regression used for analysis was evident. Fracture results from the binding strength test postulate mixed adhesion-cohesion type failures in the Cr2C3 coatings. The Institution of Engineers (India) 2024.