Dublin Core The Dublin Core metadata element set is common to all Omeka records, including items, files, and collections. For more information see, http://dublincore.org/documents/dces/. Title A name given to the resource PHD PhD PhD Thesis Dublin Core The Dublin Core metadata element set is common to all Omeka records, including items, files, and collections. For more information see, http://dublincore.org/documents/dces/. Relation A related resource 61000137 Title A name given to the resource An Investigative approach to hard machining of inconel 718 with coated carbide tool Subject The topic of the resource Mechanical and Automobile Engineering Description An account of the resource Super alloys sustain good strength at high temperature and pressure conditions. Such newlinematerials have high demand in Aerospace industry, Marine industry, and Nuclear power plants. They have a great demand in Nuclear and Aerospace applications because of it retain its properties at temperature over 700 C. Machinability of nickel based super - alloys is extremely poor, mainly due to their low thermal conductivity, build up edge and self-hardening, which leads to high dynamic cutting forces. They are difficult to machine because of its high shear strength, work hardening and precipitation hardening. High abrasive particles in its microstructure and tendency forming chip to weld to tool and form Built Up Edge (BUE) make it more difficult to machine. Friction between tool and material and its low thermal conductivity newlineresults in high temperature generation. They have Nickel (Ni), Chromium (Cr), Ferrous (Fe) or Cobalt (Co) as base contains. Small amount of Al, Ti, Nb, Ta, W, Mo added to these alloys to sustain at high temperature. Chromium is important alloying element in order to obtain the hot corrosion resistance property. Due to these factors the tool wear is extremely high and increasing the tool life by minutes is an enormous success. To overcome this situation, various newlinematerials have been developed for Inconel 718 machining. Though Ceramic tools, Silicon newlineCarbide whiskers, reinforced alumina tools, carbide tools have been used to machine Inconel 718 but they have failed to produce good surface, better accuracy and minimum tool wear. The present study is to improvise the surface roughness, reduce tool wear and create better machining parameters for extensive use of the material. Taguchi methodology, Grey Relational Analysis (GRA) and Response Surface Methodology (RSM) have been used to analyze the cutting parameters and determine better response parameters for the machining characteristics of Inconel 718. Creator An entity primarily responsible for making the resource Rout, Ivan Sunit. Source A related resource from which the described resource is derived Author's Submission Publisher An entity responsible for making the resource available Christ(Deemed to be University) Date A point or period of time associated with an event in the lifecycle of the resource 2020-01-01 Contributor An entity responsible for making contributions to the resource Pandian, P Pal Rights Information about rights held in and over the resource Open Access Format The file format, physical medium, or dimensions of the resource PDF Language A language of the resource English Type The nature or genre of the resource PhD Identifier An unambiguous reference to the resource within a given context <a href="http://hdl.handle.net/10603/338784" target="_blank" rel="noreferrer noopener">http://hdl.handle.net/10603/338784</a>