Effect of post annealing on DC magnetron sputtered tungsten oxide (WO3) thin films for smartwindow applications
- Title
- Effect of post annealing on DC magnetron sputtered tungsten oxide (WO3) thin films for smartwindow applications
- Creator
- Reddy G V A.; Naveen Kumar K.; Sattar S.A.; Shetty H.D.; Guru Prakash N.; Imran Jafri R.; Devaraja C.; B C M.; C S K.; Premkumar R.; Ansar S.
- Description
- Tungsten oxide (WO3) thin films were deposited on Fluorine Doped Tin Oxide (FTO) and Corning Glass (CG) glass substrate by DC magnetron sputtering. The annealing temperature was varied to study its effect on surface morphology, structural, electrochromic (EC), and optical properties and these are investigated by Scanning Electron Microscope (SEM), X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Raman spectroscopy, Cyclic voltammetry, and ultraviolet (UV) spectroscopy. From SEM analysis WO3 thin films annealed at 27 C, 100 C, 200 C, and 300 C were shown to crack free after that cracked film was observed for 400 C. From the XRD investigation that the WO3 thin films annealed at 27 C, 100 C, 200 C, and 300 C were amorphous and crystallized at 400 C. The optical band gap (Eg) of WO3 films was decreased from 2.98 eV to 2.30 eV with an increase in annealed temperature. The coloration efficiency (CE) was observed at 51.26 cm2/C at 300 C and 35.06 cm2/C at 400 C and the lowest diffusion coefficient was observed at 5.86 10?10 cm2/s at 400 C. On coloring efficiency, which can be very important in electrochromic (EC) applications, post-annealing has been seen to have a strong influence. 2023 Elsevier B.V.
- Source
- Physica B: Condensed Matter, Vol-664
- Date
- 2023-01-01
- Publisher
- Elsevier B.V.
- Subject
- Annealing temperature; Coloration efficiency; Diffusion coefficient; Room temperature (RT); Sputtering; Tungsten oxide (WO3)
- Coverage
- Reddy G V A., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Karnataka, Bengaluru, 560064, India; Naveen Kumar K., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Karnataka, Bengaluru, 560064, India, Center for Nanomaterials and MEMS, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India; Sattar S.A., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Karnataka, Bengaluru, 560064, India; Shetty H.D., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Karnataka, Bengaluru, 560064, India; Guru Prakash N., School of Mechanical Engineering, Yeungnam University, 280 Daehak-ro, Gyeongsangbuk-do, Gyoungsan-si, 38541, South Korea; Imran Jafri R., Department of Physics and Electronics, Christ University, Hosur Road, Bengaluru, 560029, India; Devaraja C., Department of Physics Manipal Institute of Technology, Bengaluru, Manipal Academy of Higher Education, Karnataka, Manipal, 576104, India; B C M., Department of Physics, SJC Institute of Technology, Karnataka, Chickballapur, 562101, India; C S K., Department of Physics, BMS College of Engineering, Karnataka, Bengaluru, 560019, India; Premkumar R., Department of Physics, N.M.S.S.V.N. College, Nagamalai, Tamil Nadu, Madurai, 625019, India; Ansar S., Department of Clinical Laboratory Sciences, College of Applied Medical Sciences, King Saud University, P.O. Box 10219, Riyadh, 11433, Saudi Arabia
- Rights
- Restricted Access
- Relation
- ISSN: 9214526; CODEN: PHYBE
- Format
- Online
- Language
- English
- Type
- Article
Collection
Citation
Reddy G V A.; Naveen Kumar K.; Sattar S.A.; Shetty H.D.; Guru Prakash N.; Imran Jafri R.; Devaraja C.; B C M.; C S K.; Premkumar R.; Ansar S., “Effect of post annealing on DC magnetron sputtered tungsten oxide (WO3) thin films for smartwindow applications,” CHRIST (Deemed To Be University) Institutional Repository, accessed March 1, 2025, https://archives.christuniversity.in/items/show/14076.