Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy
- Title
- Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy
- Creator
- Pradeep Kumar G.S.; Harish Kumar M.; Thomas S.; Yegnesh H.M.; Bharadwaj S.; Hebbar G.S.
- Description
- High-velocity oxy-fuel (HVOF) is a widely used thermal spray technique to obtain high density, high bond strength, and improved hardness coatings. In the present work, optimization of HVOF process parameters was carried out using the Taguchi method to minimize porosity and improve microhardness, and bond strength of Cr2O3 coatings. Based on the signal-to-noise ratio and analysis of variance, the significance of each process parameter and optimum parameter combination is obtained. Based on the signal-to-noise ratio, the most significant process parameter affecting porosity and microhardness was standoff distance, while for bond strength, it was powder feed rate. An optimal combination of process parameters for porosity, microhardness, and bond strength was obtained from S/N ratio analysis. For porosity, optimal parameters were standoff distance of 100rpm, powder feed rate of 30g/min, and gun speed of 250mm/s. The optimal process parameters for microhardness were standoff distance of 300rpm, powder feed rate of 50g/min, and gun speed of 200mm/s. Finally, for bond strength, the optimal process parameters were standoff distance of 300rpm, powder feed rate of 50g/min, and gun speed of 250mm/s. Statistical results for porosity, microhardness, and bond strength showed that the difference between the predicted R2 and adjusted R2 values were relatively minimal and close to the one highlighting the fitness of the regression model employed for analysis. Fracture analysis after bond strength test showed combined adhesion/cohesion type failure for the Cr2O3 coatings. 2021, The Indian Institute of Metals - IIM.
- Source
- Transactions of the Indian Institute of Metals, Vol-74, No. 8, pp. 2013-2025.
- Date
- 2021-01-01
- Publisher
- Springer
- Subject
- Adhesion; Chromium oxide coating; Microhardness; Porosity; Taguchi method
- Coverage
- Pradeep Kumar G.S., Department of Mechanical and Automobile Engineering, CHRIST (Deemed To Be University), Bangalore, 560074, India; Harish Kumar M., Department of Mechanical and Automobile Engineering, CHRIST (Deemed To Be University), Bangalore, 560074, India; Thomas S., Department of Mechanical and Automobile Engineering, CHRIST (Deemed To Be University), Bangalore, 560074, India; Yegnesh H.M., Department of Mechanical and Automobile Engineering, CHRIST (Deemed To Be University), Bangalore, 560074, India; Bharadwaj S., Department of Mechanical and Automobile Engineering, CHRIST (Deemed To Be University), Bangalore, 560074, India; Hebbar G.S., Department of Mechanical and Automobile Engineering, CHRIST (Deemed To Be University), Bangalore, 560074, India
- Rights
- Restricted Access
- Relation
- ISSN: 9722815
- Format
- Online
- Language
- English
- Type
- Article
Collection
Citation
Pradeep Kumar G.S.; Harish Kumar M.; Thomas S.; Yegnesh H.M.; Bharadwaj S.; Hebbar G.S., “Studies on Parametric Optimization of HVOF-Sprayed Cr2O3 Coatings on Al6061 Alloy,” CHRIST (Deemed To Be University) Institutional Repository, accessed February 26, 2025, https://archives.christuniversity.in/items/show/15777.