Stir Speed and Reinforcement Effects on Tensile Strength in Al-Based Composites
- Title
- Stir Speed and Reinforcement Effects on Tensile Strength in Al-Based Composites
- Creator
- Rajendran S.; Arulpandy P.; Reena R.; Thakur G.; Al-Jawahry H.M.
- Description
- This study focuses on the preparation of Al-based hybrid composites using AA7475 as the main alloy reinforced with two materials, ZrO2 and SiC. The combination of stir-squeeze processing techniques was employed to create various specimens by varying four parameters: Stir-speed, Stir-time, reinforcements, and squeeze pressure. Taguchi design was utilized to generate specimens for analyzing their mechanical properties, specifically tensile strength, hardness, and porosity.The results indicated that the highest porosity (4.44%) was observed in the L16 test, with a combination of 700rpm stir speed, 25 mins stir time, 2wt% reinforcements, and 80MPa squeeze pressure. On the other hand, the lowest porosity (2.61%) was found in the L7 test, with 800rpm stir speed, 30 mins stir time, 2wt% reinforcements, and 100 MPa squeeze pressure.Regarding tensile strength (UTS), the maximum value (285.23MPa) was achieved in the L13 experiment, while the minimum value (187.58 MPa) was observed in the L1 experiment. This variation in UTS can be attributed to the applied load, the strengthening effect of the reinforcements, and the grain size of SiC. 2024 E3S Web of Conferences
- Source
- E3S Web of Conferences, Vol-491
- Date
- 2024-01-01
- Publisher
- EDP Sciences
- Subject
- AMCs; Squeeze casting and optimization Techniques
- Coverage
- Rajendran S., Department of Mechanical Engineering, Jaya Engineering College, Chennai, India; Arulpandy P., Department of Mathematics, Christ (Deemed to Be University), Karnataka, Bangalore, 560073, India; Reena R., Department of Computer Science and Engineering, Prince Shri Venkateshwara Padmavathy Engineering College, Chennai, 600 127, India; Thakur G., Department of Civil Engineering, Uttaranchal Institute of Technology, Uttaranchal University, Dehradun, 248007, India; Al-Jawahry H.M., The Islamic University, Najaf, Iraq
- Rights
- All Open Access; Gold Open Access
- Relation
- ISSN: 25550403
- Format
- Online
- Language
- English
- Type
- Conference paper
Collection
Citation
Rajendran S.; Arulpandy P.; Reena R.; Thakur G.; Al-Jawahry H.M., “Stir Speed and Reinforcement Effects on Tensile Strength in Al-Based Composites,” CHRIST (Deemed To Be University) Institutional Repository, accessed February 25, 2025, https://archives.christuniversity.in/items/show/18976.