Synthesis, characterizations, and electrochromic studies of WO3 coated CeO2 nanorod thin films for smart window applications
subject: Cerium oxide nanorods; Cyclic voltammetry; Electrochromic; Hydrothermal process; Sputtering; WO3 thin film
description: In this work, Cerium oxide nanorods were synthesized on Fluorine doped Tin oxide (FTO) substrate by a hydrothermal technique involving Ce(NO3)36H2O (Cerium Nitrate Hexahydrate) and CH4N2O (Urea). The DC magnetron sputtering was used to deposit a thin layer of WO3 on Cerium Oxide nanorods in the presence of argon gas at room temperature. With the prepared CeO2/WO3 thin films as the working electrode, saturated AgCl2 as the reference electrode, and platinum mesh as the counter electrode, a three-electrode electrochemical cell was developed with 0.5 M H2SO4 solution diluted in deionized (DI) water as the electrolyte. The electrochromic studies displayed a coloration efficiency of 10.14 cm2/C for 0.1 M film. SEM, UVVisible, XRD, and electrochemical analyzer were used to investigate the surface morphology, optical properties, composition, and electrochromic performance of the prepared thin films. A combination of CeO2 nanorods and WO3 coating has been proved to be a potential material for Electro Chromic Devices (ECD), because of its large charge capacity and optical transmission behavior. 2022 Elsevier B.V.
creator: Ashok Reddy G.V.; Shaik H.; Kumar K.N.; Shetty H.D.; Jafri R.I.; Naik R.; Gupta J.; Sattar S.A.; Doreswamy B.H.
source: Physica B: Condensed Matter, Vol-647
publisher: Elsevier B.V.
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 9214526; CODEN: PHYBE
format: Online
language: English
type: Article
coverage: Ashok Reddy G.V., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India, Department of Physics, SJB Institute of Technology, Kengeri, Karnataka, Bengaluru, 560060, India; Shaik H., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India, Center for Nanomaterials and MEMS, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India; Kumar K.N., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India, Center for Nanomaterials and MEMS, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India; Shetty H.D., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India; Jafri R.I., Department of Physics and Electronics, Christ University, Hosur Road, Bengaluru, 560029, India; Naik R., Department of Physics, New Horizon College of Engineering, Karnataka, Bengaluru, 560103, India; Gupta J., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India, Center for Nanomaterials and MEMS, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India; Sattar S.A., Department of Physics, Nitte Meenakshi Institute of Technology, Yelahanka, Bengaluru, 560064, India; Doreswamy B.H., Department of Physics, SJB Institute of Technology, Kengeri, Karnataka, Bengaluru, 560060, India

Experimental investigation of Glass Laminate Aluminium Reinforced Epoxy characteristics influences through low velocity impact test
subject: drop weight test; GLARE; low-velocity impact; SEM
description: The fibre being one of the recently implemented advanced materials in distinctive applications is being reinforced with metals to constitute a unique composite laminate. This reinforcement will enhance the sustenance property of the laminate used in automotive sectors. In most automotive sectors, drop weight analysis at varying velocity ranges is performed to evaluate the damage characteristics of the vehicle body. Hence, the present work leads us through the study on influence of low-velocity impact at varying heights over the Glass Laminate Aluminium-Reinforced Epoxy (GLARE) laminate characteristics. Here, the laminate of constant thickness was subjected to drop weight impact. Three distinct thicknesses of (0.2, 0.3 and 0.4 mm) Al-2024 T3 aluminium alloy were used. The results indicate that laminate can sustain up to critical load in terms of impact velocity as 3.13 m/s, and beyond which, it leads to delamination damage at 3.49 m/s. The above results indicate that the maximum absorbed energy by the laminate before catastrophic failure (crack) was noticed to be 14.43 J in the case of sample B. Further, it is noticed that GLARE laminate with 0.3 mm face sheet thickness has best results with reference to both absorbed energy and damage when compared with other thicknesses. 2022 Informa UK Limited, trading as Taylor & Francis Group.
creator: Kumar M H.; Mathivanan N.R.
source: Advances in Materials and Processing Technologies, Vol-9, No. 2, pp. 689-701.
publisher: Taylor and Francis Ltd.
date: 2023-01-01
rights: Restricted Access
relation: ISSN: 2374068X
format: Online
language: English
type: Article
coverage: Kumar M H., Department of Automobile Engineering, CHRIST (Deemed to Be University), Bengaluru, India; Mathivanan N.R., Department of Mechanical Engineering, PES University, Bangalore, India

Brand Value: Nexus with Profitability and Value Relevance Indian Evidence
subject: brand equity; brand management; Fama French four-factor model; Tobin Q
description: The paper studied the association between brand value and financial profitability metrics, value relevance, and excess market returns. The study used the dollar value data of BrandZ Top Indian Brands as the proxy for brand value and used 221 firm years for a sample of 72 companies that owned the top brands for 5 years, from 2014 2018. The study deployed the fixed effects model to find the association between profitability, firm value, and brand value and the Fama French four-factor model for the risk-return performance of high-brand value stocks. The findings indicated a strong association between the brand values of firms and profitability and firm value. The portfolio returns of high-brand value companies produced higher risk-adjusted returns over market returns offered by BSE 100 stocks. This is Indias first and most comprehensive study to provide empirical evidence on the nexus between brand value, profitability, and value relevance. The results gave a concrete conclusion that building brand value offers both customer satisfaction as well as shareholder value creation. 2022, Associated Management Consultants Pvt. Ltd.. All rights reserved.
creator: Ramesh L.
source: Prabandhan: Indian Journal of Management, Vol-15, No. 12, pp. 8-21.
publisher: Associated Management Consultants Pvt. Ltd.
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 9752854
format: Online
language: English
type: Article
coverage: Ramesh L., School of Business & Management, CHRIST (Deemed to be University), Hosur Rd, Bhavani Nagar, Karnataka, Bengaluru, 560 029, India

AI-Based Yolo V4 Intelligent Traffic Light Control System
subject: artificial intelligence; intelligent monitoring; signal switching algorithm; Traffic jams; traffic light system; traffic management
description: With the growing number of city vehicles, traffic management is becoming a persistent challenge. Traffic bottlenecks cause significant disturbances in our everyday lives and raise stress levels, negatively impacting the environment by increasing carbon emissions. Due to the population increase, megacities are experiencing severe challenges and significant delays in their day-to-day activities related to transportation. An intelligent traffic management system is required to assess traffic density regularly and take appropriate action. Even though separate lanes are available for various vehicle types, wait times for commuters at traffic signal points are not reduced. The proposed methodology employs artificial intelligence to collect live images from signals to address this issue in the current system. This approach calculates traffic density, utilizing the image processing technique YOLOv4 for effective traffic congestion management. The YOLOv4 algorithm produces better accuracy in the detection of multiple vehicles. Intelligent monitoring technology uses a signal-switching algorithm at signal intersections to coordinate time distribution and alleviate traffic congestion, resulting in shorter vehicle waiting times. 2022 Boppuru Rudra Prathap et al., published by Sciendo.
creator: Prathap B.R.; Kumar K.P.; Chowdary C.R.; Hussain J.
source: Journal of Automation, Mobile Robotics and Intelligent Systems, Vol-16, No. 4, pp. 53-61.
publisher: Sciendo
date: 2022-01-01
rights: All Open Access; Hybrid Gold Open Access
relation: ISSN: 18978649
format: Online
language: English
type: Article
coverage: Prathap B.R., Department of Computer Science and Engineering, Christ University, Karnataka, Bangalore, 560074, India; Kumar K.P., Department of Computer Science and Engineering, Christ University, Karnataka, Bangalore, 560074, India; Chowdary C.R., Department of Computer Science and Engineering, Christ University, Karnataka, Bangalore, 560074, India; Hussain J., Department of Computer Science and Engineering, Christ University, Karnataka, Bangalore, 560074, India

Solvent polarity, structural and electronic properties with different solvents and biological studies of 3,3,5-triphenylfuran-2(3H)-one- cancers of the blood cells
subject: ADMET; Anti cancer; DFT; Solvent effect; Topology
description: The current work comprises synthesis, characterization and computational evaluation on 3,3,5-triphenylfuran-2(3H)-one with density functional theory (DFT) as the underlying principle. The theoretical optimized structure and corresponding geometrical parameters were obtained. Multiwfn 3. 8 was employed to conduct topological investigations such as R D G, E L F, L O L, and charge transfer analyses, which are used to identify the excited states, non-covalent interactions and important bonding regions in the molecule. Effect of solvents on the variation in molecular properties were studied with different polar solvents, with the IEFPCM model, as furanones interact with more polar solvents. The solvation studies were shown to impact on F M O, UV, M E P, and NLO analysis and thus between gas and solvent phases, a variation is observed in the properties under study. N B O studies were analysed to identify the natural bond orbitals within the molecule that contribute the maximum to the stabilization energy of the title compound. Pharmacological evaluation using readily available online tools that include SwissADME, Pre-ADMET, GUSAR, and ADMETLab 2.0 to determine the medicinal chemistry properties of the molecule was done. Furthermore, molecular docking onto chosen anticancer protein targets is performed utilising the softwares AutoDock Suite. PyMOL,and Discovery Studio Visualizer, is used to determine the best docked conformations that suggest potential capability of the compound to inhibit these proteins and protect the body from cancerous growths. 2022 Elsevier B.V.
creator: Cherian Parakkal S.; Datta R.; Saral A.; Muthu S.; Irfan A.; Jeelani A.
source: Journal of Molecular Liquids, Vol-368
publisher: Elsevier B.V.
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 1677322; CODEN: JMLID
format: Online
language: English
type: Article
coverage: Cherian Parakkal S., Department of Chemistry, CHRIST (Deemed to be University), Hosur Road, Bengaluru, 560029, India; Datta R., Department of Chemistry, CHRIST (Deemed to be University), Hosur Road, Bengaluru, 560029, India; Saral A., Department of Chemistry, Panimalar Engineering, Tamil Nadu, Chennai, 600 123, India; Muthu S., Department of Physics, Arignar Anna Govt. Arts College, 604407 Tamil Nadu, Cheyyar, India; Irfan A., Research Center for Advanced Materials Science (RCAMS), King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia, Department of Chemistry, College of Science, King Khalid University, P.O. Box 9004, Abha, 61413, Saudi Arabia; Jeelani A., Department of Physics, Lakshmi Bangaru Arts and Science College, Melmaruvathur 603319, Tamil Nadu, India

Effect of tungsten oxide thin films deposited on cerium oxide nano rods for electrochromic applications
subject: Cerium oxide nanorods; Electrochromic; Hydrothermal processes; Reactive sputtering; VU-Visible spectrometry
description: Cerium oxide Nanorods were synthesized on Fluorine-doped Tin Oxide (FTO) coated glass substrate by hydrothermal process. Optimized Tungsten Oxide (WO3) films were coated on the top of cerium oxide (CeO2) Nanorods by a sputter deposition method. WO3 thin film was deposited at a constant substrate temperature of 300K under partial pressures of oxygen (ppo2) at 8 10?4 mbar. X-ray Diffraction (XRD), Scanning Electron Microscope (SEM), UVVisible spectrometer, and cyclic voltammetry were used to analyse the films for material, optical, surface, and electrochemical properties. The improved CeO2/WO3 films increased the cathodic peak current which is related to their high active surface area and increased H+ ions intercalation in the films. In addition, the CeO2 Nanorods/WO3 hybrid films had a better electrochemical property in terms of the diffusion coefficient of 5.53 10?8 cm2/s. These structures produce considerable coloration efficiency when compared to pure WO3 (9.88, 10.19 and, 8.14 cm2/C at 700 nm). This study predicts that how varying concentrations of cerium oxide Nano rods change WO3 electrochemical behaviour which will help to choose the right rare earth elements and concentrations for energy-efficient smart windows. 2022
creator: Ashok Reddy G.V.; Sattar S.A.; Naveen Kumar K.; KaliPrasad C.S.; Devaraja C.; Imran Jafri R.; Doreswamy B.H.
source: Optical Materials, Vol-134
publisher: Elsevier B.V.
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 9253467; CODEN: OMATE
format: Online
language: English
type: Article
coverage: Ashok Reddy G.V., Department of Physics, Nitte Meenakshi Institute of Technology, Bengaluru, 560064, India, Department of Physics, SJB Institute of Technology, Bengaluru, 560 060, India; Sattar S.A., Department of Physics, Nitte Meenakshi Institute of Technology, Bengaluru, 560064, India; Naveen Kumar K., Department of Physics, Nitte Meenakshi Institute of Technology, Bengaluru, 560064, India, Centre for Nano-materials and MEMS, Nitte Meenakshi Institute of Technology, Bengaluru, 560064, India; KaliPrasad C.S., Department of Physics, BMS College of Engineering, Bengaluru, 560019, India; Devaraja C., Department of Physics, East Point College of Engineering and Technology, Bengaluru, 560049, India; Imran Jafri R., Department of Physics and Electronics, Christ University, Bengaluru, 560029, India; Doreswamy B.H., Department of Physics, SJB Institute of Technology, Bengaluru, 560 060, India

In-silico validation of novel therapeutic activities of withaferin a using molecular docking and dynamics studies
subject: Anti-cancer; anti-diabetic; cholesterol reduction; docking; W. somnifera; Withaferin A
description: Withaferin A is a bioactive molecule of W. somnifera. We access its efficacy against various target proteins associated with Cancer, Type-II Diabetes and hypercholesterolemia using molecular docking. Although its efficacy against some of these targets have been reported earlier, we validate each mechanism in order to report the most appropriate mechanism of action. We explain the anti-cancer activity of Withaferin A by inhibition of Mortalin (mtHsp70) and Nrf2 protein with binding energies ?8.85 kcal/mol and ?12.59 kcal/mol respectively. Similarly, the anti-diabetic activity could be explained by inhibition of alpha and bet?-glucosidase with binding energies ?6.44 and ?4.43 kcal/mol respectively and the cholesterol reduction could be explained by its ability to inhibition of NPC1 and SRB1 with binding energies ?5.73 and ?7.16 kcal/mol respectively. The molecular dynamics of the apoprotein and the protein-ligand complex simulated for the best targets of each activity namely Nrf2 protein for anti-cancer, ?-glucosidase for anti-diabetic and SR-B1 for anti-hypercholesterolemia activity indicated the formation of stable complexes due to low RMSD deviations, low RMSF fluctuations and low RG values after the docking simulation. Finally, an ADME + T (Adsorption, distribution, metabolism, excretion and toxicity) prediction on Withaferin A showed that it obeyed all the Lipinskys rules and qualified the drug-like criteria. All these results validate that Withaferin A possess potential anti-cancer, anti-diabetic and cholesterol reducing properties. This is the first report that indicates the possibility of Withaferin A binding and inhibiting SR-B1 as a mechanism of its anti-hypercholesterolemia activity. 2022 Informa UK Limited, trading as Taylor & Francis Group.
creator: Surya Ulhas R.; Malaviya A.
source: Journal of Biomolecular Structure and Dynamics, Vol-41, No. 11, pp. 5045-5056.
publisher: Taylor and Francis Ltd.
date: 2023-01-01
rights: Restricted Access
relation: ISSN: 7391102; PubMed ID: 35608923; CODEN: JBSDD
format: Online
language: English
type: Article
coverage: Surya Ulhas R., Applied and Industrial Biotechnology Laboratory, Department of Life Sciences, CHRIST (Deemed-to-Be University), Karnataka, Bangalore, India, Faculty of life sciences, University of Jena, (Friedrich-Schiller-Universit Jena), Jena, Germany; Malaviya A., Applied and Industrial Biotechnology Laboratory, Department of Life Sciences, CHRIST (Deemed-to-Be University), Karnataka, Bangalore, India

Study of correlation between optical flux and polarization variations in BL Lac objects
subject: BL Lacertae objects: general; galaxies: active; galaxies: jets; ?-rays: galaxies
description: Polarized radiation from blazars is one key piece of evidence for synchrotron radiation at low energy, which also shows variations. We present here our results on the correlation analysis between optical flux and polarization degree (PD) variations in a sample of 11 BL Lac objects using ?10 yr of data from the Steward Observatory. We carried out the analysis on long-term (?several months) as well as on short-term time-scales (?several days). On long-term time-scales, for about 85 per cent of the observing cycles, we found no correlation between optical flux and PD. On short-term time-scales, we found a total of 58 epochs with a significant correlation between optical flux and PD, where both positive and negative correlation were observed. In addition, we also found a significant correlation between optical flux and ?-ray flux variations on long-term time-scales in 11 per cent of the observing cycles. The observed PD variations in our study cannot be explained by changes in the power-law spectral index of the relativistic electrons in the jets. The shock-in-jet scenario is favoured for the correlation between optical flux and PD, whereas the anticorrelation can be explained by the presence of multizone emission regions. The varying correlated behaviour can also be explained by the enhanced optical flux caused by the newly developed radio knots in the jets and their magnetic field alignment with the large-scale jet magnetic field. 2022 The Author(s).
creator: Rajput B.; Pandey A.; Stalin C.S.; Mathew B.
source: Monthly Notices of the Royal Astronomical Society, Vol-517, No. 3, pp. 3236-3256.
publisher: Oxford University Press
date: 2022-01-01
rights: All Open Access; Green Open Access
relation: ISSN: 358711; CODEN: MNRAA
format: Online
language: English
type: Article
coverage: Rajput B., Department of Physics, CHRIST (Deemed to be University), Hosur Road, Bangalore, 560 029, India, Indian Institute of Astrophysics, Block II, Koramangala, Bangalore, 560034, India; Pandey A., Indian Institute of Astrophysics, Block II, Koramangala, Bangalore, 560034, India; Stalin C.S., Indian Institute of Astrophysics, Block II, Koramangala, Bangalore, 560034, India; Mathew B., Department of Physics, CHRIST (Deemed to be University), Hosur Road, Bangalore, 560 029, India

Anchored ferrocene based heterogeneous electrocatalyst for the synthesis of benzimidazoles
subject: Benzimidazole; Electrocatalysis; Ferrocene; Mediator-free; Oxidative cyclization
description: A facile and sustainable electrochemical synthetic strategy for phenyl benzimidazoles has been developed using a ferrocene-based electrocatalyst anchored on Toray carbon paper (TCP) coated with conducting polymeric film. The developed electrode was used for the electrochemical dehydrogenative cyclization reaction of o-phenylene diamine and benzaldehyde using lithium perchlorate/acetonitrile as electrolyte. The surface characteristic properties of the developed electrode were characterized by FESEM, Optical profilometer and X-ray photoelectron spectroscopy. Electron transfer mechanism of the anchored ferrocene-based electrocatalyst was thoroughly studied. To determine the efficacy of the catalyst, the electron transfer coefficient (0.5) and apparent rate constant 41.4 s?1 were determined. The cyclic voltammetry studies reveal that the electrochemical oxidation peak for the synthesis of benzimidazole occurs at 0.48 V. The formation of the product was confirmed by Gas chromatography and Nuclear Magnetic Resonance spectroscopy. A comparison chart is presented for the green metrics and sustainability of the present strategy with other electrochemical approach. 2022 Elsevier Ltd
creator: Thadathil D.A.; M B.; Varghese A.; Ghosh M.
source: Electrochimica Acta, Vol-435
publisher: Elsevier Ltd
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 134686; CODEN: ELCAA
format: Online
language: English
type: Article
coverage: Thadathil D.A., Department of Chemistry, CHRIST (Deemed to be University), Hosur Road, Karnataka, Bengaluru, 560029, India; M B., Department of Chemistry, Ashoka University, Harayana, 131029, India; Varghese A., Department of Chemistry, CHRIST (Deemed to be University), Hosur Road, Karnataka, Bengaluru, 560029, India; Ghosh M., Department of Chemistry, Ashoka University, Harayana, 131029, India

Sampling and Categorization of Households for Research in Urban India
subject: governance; methodology; Sampling; sampling frame; urban
description: Conventional sampling methodologies for citizens/households in urban research in India are constrained due to the lack of readily available, reliable sampling frames. Voter lists, for example, are riddled with errors and, as such may not be able to provide a robust sampling frame from which a representative sample can be drawn. The JanaBrown Citizenship Index project consortium (Janaagraha, India; Brown University, USA) has conceptualized a unique research design that provides an alternative way on how to identify, categorize and sample households (and citizens within) in a city in a representative and meaningful way. The consortium consists of the Janaagraha Centre for Citizenship and Democracy, based in India, and the Brown Center for Contemporary South Asia, part of Brown University, USA. The methodology was designed to enable systematic data collection from citizens and households on aspects of citizenship, infrastructure and service delivery across different demographic sections of society. The article describes how (a) data on communities that are in the minority, such as Muslims, scheduled castes (SC) and scheduled tribes (ST), were used to categorize Polling Parts to allow for stratified random sampling using these strata, (b) geospatial tools such as QGIS and Google Earth were used to create base maps aligning to the established Polling Part unit, (c) the resulting maps were used to create listings of buildings, (d) how housing type categorizations were created (based on the structure/construction material/amenities, etc.) and comprised part of the building listing process, and (e) how the listings were used for sampling and to create population weights where necessary. This article describes these methodological approaches in the context of the project while highlighting advantages and challenges in application to urban research in India more generally. 2022 Lokniti, Centre For The Study Of Developing Societies.
creator: Arora T.; Pyle K.
source: Studies in Indian Politics, Vol-10, No. 2, pp. 254-274.
publisher: SAGE Publications Ltd
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 23210230
format: Online
language: English
type: Article
coverage: Arora T., Christ (Deemed to be University), Karnataka, Bengaluru, India; Pyle K., Janaagraha Centre for Citizenship and Democracy, Karnataka, Bengaluru, India

Emission line star catalogues post- Gaia DR3: A validation of Gaia DR3 data using the LAMOST OBA emission catalogue
subject: Be; Catalogs; Herbig Ae/Be; Methods: data analysis; Stars: emission-line; Stars: variables: T Tauri; Techniques: spectroscopic
description: Aims.Gaia Data Release 3 (DR3) and further releases have the potential to identify and categorise new emission-line stars in the Galaxy. We perform a comprehensive validation of astrophysical parameters from Gaia DR3 with the spectroscopically estimated emission-line star parameters from the LAMOST OBA emission catalogue. Method. We compare different astrophysical parameters provided by Gaia DR3 with those estimated using LAMOST spectra. By using a larger sample of emission-line stars, we performed a global polynomial and piece-wise linear fit to update the empirical relation to convert the Gaia DR3 pseudo-equivalent width to the observed equivalent width, after removing the weak emitters from the analysis. Results. We find that the emission-line source classifications given by DR3 is in reasonable agreement with the classification from the LAMOST OBA emission catalogue. The astrophysical parameters estimated by the esphs module from Gaia DR3 provides a better estimate when compared to gspphot and gspspec. A second degree polynomial relation is provided along with piece-wise linear fit parameters for the equivalent width conversion. We notice that the LAMOST stars with weak H? emission are not identified to be in emission from BP/RP spectra. This suggests that emission-line sources identified by Gaia DR3 are incomplete. In addition, Gaia DR3 provides valuable information about the binary and variable nature of a sample of emission-line stars. 2022 EDP Sciences. All rights reserved.
creator: Shridharan B.; Mathew B.; Bhattacharyya S.; Robin T.; Arun R.; Kartha S.S.; Manoj P.; Nidhi S.; Maheshwar G.; Paul K.T.; Narang M.; Himanshu T.
source: Astronomy and Astrophysics, Vol-668
publisher: EDP Sciences
date: 2022-01-01
rights: All Open Access; Green Open Access; Hybrid Gold Open Access
relation: ISSN: 46361; CODEN: AAEJA
format: Online
language: English
type: Article
coverage: Shridharan B., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Mathew B., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Bhattacharyya S., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Robin T., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Arun R., Indian Institute of Astrophysics, Koramangala, Bangalore, India; Kartha S.S., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Manoj P., Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai, India; Nidhi S., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Maheshwar G., Indian Institute of Astrophysics, Koramangala, Bangalore, India; Paul K.T., Department of Physics and Electronics, Christ (Deemed to Be University), Hosur Main Road, Bangalore, India; Narang M., Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai, India; Himanshu T., Tata Institute of Fundamental Research, Homi Bhabha Road, Mumbai, India

A Bose horn antenna radio telescope (BHARAT) design for 21 cm hydrogen line experiments for radio astronomy teaching
description: We have designed a low-cost radio telescope system named the Bose Horn Antenna Radio Telescope (BHARAT) to detect the 21 cm hydrogen line emission from our Galaxy. The system is being used at the Radio Physics Laboratory (RPL) (Radio Physics Lab, IUCAA NCRA-TIFR, , ), Inter-University Centre for Astronomy and Astrophysics (IUCAA), India, for laboratory sessions and training students and teachers. It is also a part of the laboratory curriculum at several universities and colleges. Here, we present the design of a highly efficient, easy to build, and cost-effective dual-mode conical horn used as a radio telescope and describe the calibration procedure. We also present some model observation data acquired using the telescope for facilitating easy incorporation of this experiment in the laboratory curriculum of undergraduate or post-graduate programs. We have named the antenna after Acharya (teacher or an influential mentor) Jagadish Chandra Bose, honoring a pioneer in radio-wave science and an outstanding teacher, who inspired several world renowned scientists. 2022 Author(s).
creator: Mhaske A.A.; Bagchi J.; Joshi B.C.; Jacob J.; Paul K.T.
source: American Journal of Physics, Vol-90, No. 12, pp. 948-960.
publisher: American Association of Physics Teachers
date: 2022-01-01
rights: All Open Access; Green Open Access
relation: ISSN: 29505
format: Online
language: English
type: Article
coverage: Mhaske A.A., Inter-University Centre for Astronomy and Astrophysics, Savitribai Phule Pune University Campus, Post Bag 4, Ganeshkhind, Pune, 411007, India; Bagchi J., Inter-University Centre for Astronomy and Astrophysics, Savitribai Phule Pune University Campus, Post Bag 4, Ganeshkhind, Pune, 411007, India, Department of Physics & Electronics, CHRIST, Deemed to Be University, Hosur Road, Bengaluru, 560029, India; Joshi B.C., National Centre for Radio Astrophysics, Tata Institute of Fundamental Research, Pune University Campus, Post Bag 3, Ganeshkhind, Pune, 411007, India; Jacob J., Newman College, Thodupuzha, Kerala, 685585, India; Paul K.T., Department of Physics & Electronics, CHRIST, Deemed to Be University, Hosur Road, Bengaluru, 560029, India

Drill hole surface characterisation of hybrid FRP laminates through statistical analysis
subject: delamination factor; drilling attributes; fibre morphology; Surface roughness
description: As it is known that the hybrid Fibre Reinforced Polymer (FRP) composite laminate is a recently evolved class of structural material. Hence, the present work deals with secondary processing ability like hole drilling on hard to machine FRP laminate. The influence of drilling attributes on the delamination factor and surface roughness contours are studied for a high thickness hybrid (carbon/glass FRP) laminates. Here, the experimentation was performed utilising Taguchis L27 design of experiments array. Later, on post-drilling, the predominant and optimum variables were studied through taguchi and variance analysis to highlight their contribution on the response functions. Taguchi results indicate that the combination of the 90?tungsten carbide tool, speed of 800 rpm, and rate of feed 50 mm/min gives the best performance concerning the delamination. Also, it was observed that the combination of the 118?tungsten carbide tool, cutting speed of 900 rpm and the rate of feed 60 mm/min give the best performance concerning surface roughness. Whereas, as per ANOVA, the highest percentage contribution factor was concerned to a tool material followed by other factors and analysed data lie with the confidence level of 95%. The work also indicates that tungsten carbide tool yield better results compared to high-speed steel tool. Further, fibre morphology has been studied, which indicates optimal structure with minimal damage. 2020 Engineers Australia.
creator: Babu N.S.M.; Mathivanan N R.; Kumar M H.
source: Australian Journal of Mechanical Engineering, Vol-21, No. 2, pp. 442-459.
publisher: Taylor and Francis Ltd.
date: 2023-01-01
rights: Restricted Access
relation: ISSN: 14484846
format: Online
language: English
type: Article
coverage: Babu N.S.M., Department of Mechanical Engineering, Dr. T Thimmaiah Institute of Technology, VTU, Kolar Gold Fields, India; Mathivanan N R., Department of Mechanical Engineering, PES University (PESU), Bangalore, India; Kumar M H., Department of Automobile Engineering, CHRIST University, Bangalore, India

The Un-Human Beings: The Denial of Muslim Migrants Bodies in India and Poland
subject: India; islamophobia; migrant; nationalism; Poland; postcolonial; postsocialist; refugee
description: This essay traces the political and legal discourses around migrants and refugees in two distinct conditions: the postcolonial and the postsocialist of India and Poland, respectively. The two countries have recently turned to nationalist right-wing politics with an increasingly hostile focus on foreign Others, particularly Muslims. In the context of increased global surveillance and criminalization of Muslims, we show how the bodies of Muslim migrants are dehumanized and constructed as threats, denying their humanity in the process. We do this through the two cases of Ayub and Ameer, two Muslim men navigating their illegality in two different contexts in India and Poland. This essay is a contribution to the literature on postcolonial and postsocialist theories and critical debates about the possibilities of dialogue between postsocialist and postcolonial geographies. The examples we use demonstrate that the postcolonial and postsocialist nation-states respond to global phenomena such as migration and Islamophobia in ways that have discernible traces of their histories and are constituted distinctively from the western metropoles. 2022 Informa UK Limited, trading as Taylor & Francis Group.
creator: Kumar M.; Narkowicz K.
source: Interventions, Vol-25, No. 4, pp. 413-430.
publisher: Routledge
date: 2023-01-01
rights: Restricted Access
relation: ISSN: 1369801X
format: Online
language: English
type: Article
coverage: Kumar M., Department of English and Cultural Studies, Christ (Deemed to be University), Bangalore, India; Narkowicz K., Department of Criminology and Sociology, Middlesex University, London, United Kingdom

The Challenges of Blockchain Technology Adoption in the Agro-based Industries
subject: Agriculture supply chain; Agro-based industries; Blockchain; Sustainability
description: Blockchain is one of the latest innovations in information technology, bringing a digital revolution to many industries by increasing transparency. But this technology needs to be explored a lot as of now. Agriculture supply chain management distributes agro-based products like vegetables, fruits, pulses, and cereals. This research is conducted to identify the agro-based industries' adoption of blockchain in their supply chain for achieving sustainability. The next step towards sustainable agriculture is primarily seen as blockchain-enabled agriculture. By making supply chains transparent, technology can follow products from the point of manufacture and prevent waste and inefficiency. A structured literature review helped determine the barriers to blockchain adoption in agro-based industries. This research is unique as no survey-based research on blockchain in the agriculture supply chain using structural equation modeling has been found. The seven proposed hypotheses support the blockchain challenges for adoption in agro-based industries. The findings of this study suggest that the blockchain can bring transparency and traceability and will remove the agro-industry inefficiencies. 2022 International Journal of Mathematical, Engineering and Management Sciences. All rights reserved.
creator: Nagariya R.; Mukherjee S.; Baral M.M.; Patel B.S.; Venkataiah C.
source: International Journal of Mathematical, Engineering and Management Sciences, Vol-7, No. 6, pp. 949-963.
publisher: Ram Arti Publishers
date: 2022-01-01
rights: All Open Access; Gold Open Access
relation: ISSN: 24557749
format: Online
language: English
type: Article
coverage: Nagariya R., School of Business and Management, CHRIST (Deemed to Be University), Delhi-NCR, Uttar Pradesh, Ghaziabad, India; Mukherjee S., Department of Operations, GITAM Institute of Management, GITAM (Deemed to Be University), Andhra Pradesh, Visakhapatnam, India; Baral M.M., Department of Operations, GITAM Institute of Management, GITAM (Deemed to Be University), Andhra Pradesh, Visakhapatnam, India; Patel B.S., Thiagrajar School of Management, Tamilnadu, Madurai, India; Venkataiah C., Department of Operations Management, Indira Gandhi National Open University, Delhi, India

Barbell-shaped giant radio galaxy with ? 100 kpc kink in the jet
subject: Galaxies: active; Galaxies: clusters: general; Galaxies: clusters: intracluster medium; Galaxies: jets; Instabilities; Radio continuum: galaxies
description: We present for the first time a study of peculiar giant radio galaxy (GRG) J223301+131502 using deep multi-frequency radio observations from GMRT (323, 612, and 1300 MHz) and LOFAR (144 MHz) along with optical spectroscopic observations with the WHT 4.2m optical telescope. Our observations have firmly established its redshift of 0.09956 and unveiled its exceptional jet structure extending more than ? 200 kpc leading to a peculiar kink structure of ? 100 kpc. We measure the overall size of this GRG to be ? 1.83 Mpc; it exhibits lobes without any prominent hotspots and closely resembles a barbell. Our deep low-frequency radio maps clearly reveal the steep-spectrum diffuse emission from the lobes of the GRG. The magnetic field strength of ? 5 ?G and spectral ages between about 110 to 200 mega years for the radio lobes were estimated using radio data from LOFAR 144 MHz observations and GMRT 323 and 612 MHz observations. We discuss the possible causes leading to the formation of the observed kink feature for the GRG, which include precession of the jet axis, development of instabilities and magnetic reconnection. Despite its enormous size, the Barbell GRG is found to be residing in a low-mass (M200 ? 1014 M) galaxy cluster. This GRG with two-sided large-scale jets with a kink and diffuse outer lobes residing in a cluster environment, provides an opportunity to explore the structure and growth of GRGs in different environments. 2022 EDP Sciences. All rights reserved.
creator: Dabhade P.; Shimwell T.W.; Bagchi J.; Saikia D.J.; Combes F.; Gaikwad M.; Rtgering H.J.A.; Mohapatra A.; Ishwara-Chandra C.H.; Intema H.T.; Raychaudhury S.
source: Astronomy and Astrophysics, Vol-668
publisher: EDP Sciences
date: 2022-01-01
rights: All Open Access; Green Open Access; Hybrid Gold Open Access
relation: ISSN: 46361; CODEN: AAEJA
format: Online
language: English
type: Article
coverage: Dabhade P., Observatoire de Paris, Lerma, Colle de France, Cnrs, Psl University, Sorbonne University, Paris, 75014, France; Shimwell T.W., Astron, Netherlands Institute for Radio Astronomy, Postbus 2, AA Dwingeloo, 7990, Netherlands, Leiden Observatory, Leiden University, PO Box 9513, RA Leiden, 2300, Netherlands; Bagchi J., Inter-University Centre for Astronomy and Astrophysics (IUCAA), Pune, 411007, India, Department of Physics and Electronics, Christ (Deemed to Be University), Bengaluru, 560029, India; Saikia D.J., Inter-University Centre for Astronomy and Astrophysics (IUCAA), Pune, 411007, India, Department of Physics, Tezpur University, Tezpur, 784028, India; Combes F., Observatoire de Paris, Lerma, Colle de France, Cnrs, Psl University, Sorbonne University, Paris, 75014, France; Gaikwad M., Max-Planck-Institut f Radioastronomie, Auf dem Hugel 69, Bonn, 53121, Germany; Rtgering H.J.A., Leiden Observatory, Leiden University, PO Box 9513, RA Leiden, 2300, Netherlands; Mohapatra A., Inter-University Centre for Astronomy and Astrophysics (IUCAA), Pune, 411007, India; Ishwara-Chandra C.H., National Centre for Radio Astrophysics, Tifr, Post Bag 3, Ganeshkhind, Pune, 411007, India; Intema H.T., Leiden Observatory, Leiden University, PO Box 9513, RA Leiden, 2300, Netherlands; Raychaudhury S., Inter-University Centre for Astronomy and Astrophysics (IUCAA), Pune, 411007, India, School of Physics and Astronomy, University of Birmingham, Birmingham, B15 2TT, United Kingdom

Dependence between Sugar Industry Specific Factors and Sugar Companies Share Prices: Evidence from India
subject: India; Macroeconomic Factors; Ordinary Least Squares; Quantile Regression; Share Prices; Sugar Companies; Sugar Industry
description: We assess the effects of sugar industry-specific macroeconomic factors on share prices of sugar companies in India using quantile regression approach from January 2001 to December 2017. We detect grounds to affirm the dependence between sugar industry specific macroeconomic factors and sugar companies share prices. The results indicate that the change in sugarcane cultivation area has both positive and negative effect on the share prices of sugar companies. Further, it shows that the impact of sugar production on share prices of sugar companies varies across the different quantiles except an insignificant effect on two companies for all quantiles. Moreover, most of the companies share prices are highly and positively influenced by sugar import. The study pointed out that the risk of sugar industry specific macroeconomic factors noticed in the sugar companies share prices is heterogenous. Indian Institute of Finance Vol. XXXVI No. 4, December 2022.
creator: Faniband M.; Patil P.; Naykawade T.; Chellaswamy K.P.
source: Finance India, Vol-36, No. 4, pp. 1381-1394.
publisher: Indian Institute of Finance
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 9703772
format: Online
language: English
type: Article
coverage: Faniband M., CHRIST (Deemed to be University), The School of Comerce, Finance and Accountancy, Karnataka, Bengaluru, 560029, India; Patil P., Ministry of Commerce and Industry (APEDA) Government of India, India; Naykawade T., Department of Commerce and Management, Shivaji University, Maharashtra, Kolhapur, 416004, India; Chellaswamy K.P., CHRIST (Deemed to be University), The School of Comerce, Finance and Accountancy, Karnataka, Bengaluru, 560029, India

Modeling of Real Time Traffic Flow Monitoring System Using Deep Learning and Unmanned Aerial Vehicles
subject: Deep learning; speed estimation; traffic flow monitoring; unmanned aerial vehicles; vehicle counting; video surveillance
description: Recently, intelligent video surveillance technologies using unmanned aerial vehicles (UAVs) have been considerably increased in the transportation sector. Real time collection of traffic videos by the use of UAVs finds useful to monitor the traffic flow and road conditions. Since traffic jams have become common in urban areas, it is needed to design artificial intelligence (AI) based recognition techniques to attain effective traffic flow monitoring. Besides, the traffic flow monitoring system can assist the traffic managers to start efficient dispersal actions. Therefore, this study designs a real time traffic flow monitoring system using deep learning (DL) and UAVs, called RTTFM-DL. The proposed RTTFM-DL technique aims to detect vehicles, count vehicles, estimate speed and determine traffic flow. In addition, an efficient vehicle detection model is proposed by the use of Faster Regional Convolutional Neural Network (Faster RCNN) with Residual Network (ResNet). Also, a detection line based vehicle counting approach is designed, which is based on overlap ratio. Finally, traffic flow monitoring takes place based on the estimated vehicle count and vehicle speed. In order to guarantee the effectual performance of the RTTFM-DL technique, a series of experimental analyses take place and the results are examined under varying aspects. The experimental outcomes highlighted the betterment of the RTTFM-DL technique over the recent techniques. The RTTFM-DL technique has gained improved outcomes with a higher accuracy of 0.975. 2022 River Publishers.
creator: Upadhye S.; Neelakandan S.; Thangaraj K.; Vijendra Babu D.; Arulkumar N.; Qureshi K.
source: Journal of Mobile Multimedia, Vol-19, No. 2, pp. 477-496.
publisher: River Publishers
date: 2023-01-01
rights: All Open Access; Gold Open Access
relation: ISSN: 15504646
format: Online
language: English
type: Article
coverage: Upadhye S., Department of Computer Application, Shri Ramdeobaba College of Engineering and Management, Nagpur, India; Neelakandan S., Department of CSE, R.M.K Engineering College, Chennai, India; Thangaraj K., Department of IT, Sona College of Technology, Salem, India; Vijendra Babu D., School of Electronics Engineering, Vellore Institute of Technology, Tamil Nadu, Vellore, 632 014, India; Arulkumar N., Department of Data Science and Statistics, CHRIST (Deemed to be University), Bangalore, India; Qureshi K., Department of CSE, Sanskriti University, Uttar Pradesh, Mathura, India

Integrated Effect of Flow Field Misalignment and Gas Diffusion Layer Compression/Intrusion on High Temperature - Polymer Electrolyte Membrane Fuel Cell Performance
description: Misalignment in the flow field plates of High-Temperature Polymer Electrolyte Membrane Fuel Cell (HT-PEMFC) due to manufacturing tolerances, assembly process, or unavoidable vibration during the cell operation is contemplated its performance and durability. This study investigates the effect of flow field plate misalignment and its concomitant impact with varying the clamping pressures on HT-PEMFC operation. The study considers six degrees of cathode flow field misalignment, varying from 0% to 100% with respect to the anode flow field. Clamping pressures ranging from 1 to 2 MPa are applied to the various cases of misalignment to study their effect on GDL deformation and intrusion into the channels. The structural analysis shows that as the misalignment increases from 0 to 100%, the GDL compression increases from 26.72% to 37.75% for 1 MPa, 40.07% to 56.63% for 1.5 MPa, and 53.43% to 75.51% for 2 MPa, owing to the increase in compression approximately by 41% from their base cases and it is also crucial to note that GDL compression exaggerates at higher clamping pressures. The misalignment results in the sagging of Membrane Electrode Assembly (MEA), and the amplitude of wave nature is proportional to the degree of misalignment and clamping pressure, indicating the misalignment is the sole factor for structural changes. As a result, considerable variance in current distribution and average value is observed, i.e., at operating voltage 0.5 V, the current density drops from 4472.7 to 4264.4, 4420.7 to 4211.8, and 4374.1 to 4161.3 A m?2 from cases 1 to 6 for clamping pressures 1, 1.5, and 2 MPa, respectively, resulting in a 4.7% loss in performance. According to the observations, a misalignment of 60% is tolerable, with minimal performance loss and negligible non-uniformity in cell distributions. 2022 The Electrochemical Society (ECS). Published on behalf of ECS by IOP Publishing Limited.
creator: K. P V.B.; Varghese G.; Joseph T.V.; Chippar P.
source: Journal of the Electrochemical Society, Vol-169, No. 12
publisher: Institute of Physics
date: 2022-01-01
rights: Restricted Access
relation: ISSN: 134651; CODEN: JESOA
format: Online
language: English
type: Article
coverage: K. P V.B., CHRIST (Deemed to be University), Bengaluru, 560 029, India; Varghese G., CHRIST (Deemed to be University), Bengaluru, 560 029, India; Joseph T.V., CHRIST (Deemed to be University), Bengaluru, 560 029, India; Chippar P., Applied Engineering and Computational Analysis Laboratory, St Joseph Engineering College, Affiliated to Visvesvaraya Technological University, Belagavi) Vamanjoor, Mangaluru, 575 028, India

Spectral characteristics of the black hole binary 4U 1957+115: a multi mission perspective
subject: accretion; accretion discs; black hole physics - X-rays: low mass X-ray binaries; X-rays: individual: 4U 1957+115
description: We report spectral analysis of the persistent black hole X-ray binary, 4U 1957+115, using AstroSat, Swift, and NuSTAR observations carried out between 2016 and 2019. Modelling with a disc emission, thermal Comptonization, and blurred reflection components revealed that the source was in the high-soft state with the disc flux ?87 per cent of the total and high-energy photon index ?2.6. There is an evidence that either the inner disc radius varied by ?25 per cent or the colour hardening factor changed by ?12 per cent. The values of the inner disc radius imply that for a non-spinning black hole, the black hole mass is < 7 M ? and the source is located > 30 kpc away. On the other hand, a rapidly spinning black hole would be consistent with the more plausible black hole mass of < 10 M ? and a source distance of ?10 kpc. Fixing the distance to 10 kpc and using a relativistic accretion disc model, constrained the black hole mass to 6 M? and inclination angle to 72. A positive correlation is detected between the accretion rate and inner radii or equivalently between the accretion rate and colour factor. 2022 The Author(s).
creator: Mudambi S.P.; Gudennavar S.B.; Misra R.; Bubbly S.G.
source: Monthly Notices of the Royal Astronomical Society, Vol-517, No. 3, pp. 4489-4496.
publisher: Oxford University Press
date: 2022-01-01
rights: All Open Access; Green Open Access
relation: ISSN: 358711; CODEN: MNRAA
format: Online
language: English
type: Article
coverage: Mudambi S.P., Department of Physics and Electronics, CHRIST (Deemed to be University), Bangalore Central Campus, Bengaluru, 560029, India; Gudennavar S.B., Department of Physics and Electronics, CHRIST (Deemed to be University), Bangalore Central Campus, Bengaluru, 560029, India; Misra R., Inter-University Centre for Astronomy and Astrophysics, Ganeshkhind, Pune, 411007, India; Bubbly S.G., Department of Physics and Electronics, CHRIST (Deemed to be University), Bangalore Central Campus, Bengaluru, 560029, India