Browse Items (5511 total)
Sort by:
-
Energy-Aware Multilevel Clustering Scheme for Underwater Wireless Sensor Networks
The expansion of wireless sensor networks in the underwater environment resulted in underwater wireless sensor networks. It has dramatically impacted the research arena because of its widespread and real-time applications. But successful implementation of underwater wireless sensor networks faces many issues. The primary concern in the underwater sensor network is sensor nodes' energy depletion problem. In this paper, to improve the lifetime of the underwater wireless sensor network, an Energy-Aware Multi-level Clustering Scheme is proposed. The underwater network region is considered 3D concentric cylinders with multiple levels. Further, each level is divided into various blocks, representing one cluster. The proposed algorithm follows vertical communication mode from the sea bed to the surface area in a bottom-up fashion. Multiple levels with varying heights overcome the communication issues due to high water pressure towards the sea bed. Simulations are carried out to show the efficiency of the proposed algorithm, which performs better in terms of a prolonged network lifetime and average residual energy. The simulation result shows significant improvement in the network lifetime compared with current algorithms. 2013 IEEE. -
Energy-based features for Kannada handwritten digit recognition
In this paper, Kannada handwritten digit recognition system is proposed based on energy features. Ground truth datasets are not available to test the performance of proposed features. Hence, own dataset of Kannada handwritten digits are collected from schools, colleges, business persons and professionals. The digital images are pre-processed using morphological opening operation for removing the noise and bilinear operation is used for normalisation. The normalised image is divided into 16 blocks, and then wavelet filters were applied for each of the 16 blocks and computed the standard deviation for each of them. In this process, a total of 64 standard deviation of the wavelet coefficients are generated of which 48 coefficients are selected as potential features. The average recognition accuracy of 94.80% is achieved using nearest neighbour classifier. The proposed algorithm is free from skew and thinning and it is novelty of the paper. Copyright 2020 Inderscience Enterprises Ltd. -
Energy-efficient and secure routing strategy for opportunistic data transmission in WSNs
Driven by the critical importance of routing in Wireless Sensor Networks (WSNs) and the security vulnerabilities present in existing protocols, this research aims to address the key challenges in securing WSNs. Many current routing protocols focus on computational efficiency but fall short of providing strong security measures, leaving them vulnerable to malicious attacks. Reactive protocols, often preferred for their reduced bandwidth usage, heighten security concerns due to their limited resources for maintaining network routes, while proactive alternatives require more resources. Additionally, the ad hoc nature and energy limitations of WSNs make traditional security models, designed for wired and wireless networks, impractical. To overcome these limitations, this paper introduces the Secured Energy-Efficient Opportunistic Routing Scheme for sustainable WSNs. The proposed protocol is designed to enhance security by continuously updating neighbor information and verifying the validity of routing parameters, while also being power-aware, a critical factor given the energy constraints of WSNs. The protocol has been evaluated through simulation experiments, measuring key performance indicators such as throughput, average end-to-end delay (E2 delay), energy consumption, and network lifetime. The results demonstrate that the proposed protocol effectively strengthens WSN security while addressing the unique operational constraints of these networks. 2024 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group. -
Energy-Efficient Cluster in Wireless Sensor Network Using Life Time Delay Clustering Algorithms
Through Wireless Sensor Networks (WSN) formation, industrial and academic communities have seen remarkable development in recent decades. One of the most common techniques to derive the best out of wireless sensor networks is to upgrade the operating group. The most important problem is the arrangement of optimal number of sensor nodes as clusters to discuss clustering method. In this method, new client nodes and dynamic methods are used to determine the optimal number of clusters and cluster heads which are to be better organized and proposed to classify each round. Parameters of effective energy use and the ability to decide the best method of attachments are included. The Problem coverage find change ability network route due to which traffic and delays keep the performance to be very high. A newer version of Gravity Analysis Algorithm (GAA) is used to solve this problem. This proposed new approach GAA is introduced to improve network lifetime, increase system energy efficiency and end delay performance. Simulation results show that modified GAA performance is better than other networks and it has more advanced Life Time Delay Clustering Algorithms-LTDCA protocols. The proposed method provides a set of data collection and increased throughput in wireless sensor networks. 2022 CRL Publishing. All rights reserved. -
Energy-Efficient Long-Range Sectored Antenna for Directional Sensor Network Applications
The popularity of Directional Sensor Network (DSN) is increasing due to their improved transmission range, spectral reusability, interference mitigation, and energy efficiency. In this paper, the radio module of the DSN is implemented using an eight-sector antenna array. Two types of sectored antennas, namely the Rectangular Patch Sectored Antenna (RPSA) and the Triangular Patch Sectored Antenna (TPSA), are proposed to operate at frequency of 2.4 GHz ISM band. The RPSA has a half-power beamwidth (HPBW) of 45 and a peak gain of 5.2 dBi, while the TPSA has an HPBW of 48 and a peak gain of 4.16 dBi. The design and performance evaluation of RPSA and TPSA in terms of gain, reflection characteristics (|S11|), and HPBW are conducted using Ansys High Frequency Structure Simulator (HFSS) and Vector Network Analyzer (VNA). To demonstrate the concept, the fabricated sectored antennas are connected to MicaZ Wireless Sensor Network (WSN) nodes using an indigenously designed Single Pole 8 Throw (SP8T) Radio Frequency (RF) switchboard. The performance of the DSNs based on RPSA and TPSA is evaluated using the Cooja simulator and a testbed consisting of MicaZ nodes. The results show that RPSA outperforms TPSA and omnidirectional-based WSNs in terms of power consumption, received signal strength, and packet delivery ratio. 2024 IETE. -
Energy-efficient low-power LED-mediated effective photodegradation of cationic and anionic dyes by phthalocyanine-based COF sensitized ZnO photoactive material
The present work involves the synthesis of 2D covalent organic framework involving zinc phthalocyanine and perylene systems (2DZnPc) as low-power LED visible-light sensitizer for ZnO nanomaterial. The synthesized materials and their composites (2DZnPc@ZnO) were characterized by Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (XRD), Scanning electron microscopy (SEM), and Solid-state diffuse reflectance spectrophotometer to understand the structure, size, morphology, and optical properties. To examine the photodegradation competence of ZnO alone and its four different composites (2DZnPc@ZnO5, 2DZnPc@ZnO10, 2DZnPc@ZnO15, and 2DZnPc@ZnO20) in the presence of the energy-efficient low-power white LED (16 W) as source of visible light, and as modular pollutants, cationic methylene violet (MV) and anionic Eosin Y (EY) dyes were employed. The effect of different parameters on photocatalytic activity such as photocatalyst dosage, interaction time, pH of dye solution, and photocatalyst re-usage is examined. The results indicate that photosensitizing ZnO with 2DZnPc improved photocatalytic performance for the photodegradation of MV and EY dyes substantially. In an optimized environment, the removal efficiency of MV and EY was found to be 98 and 92 % respectively in 90 min. 2024 Elsevier Ltd -
Engagement Detection through Facial Emotional Recognition Using a Shallow Residual Convolutional Neural Networks
Online teaching and learning has recently turned out to be the order of the day, where majority of the learners undergo courses and trainings over the new environment. Learning through these platforms have created a requirement to understand if the learner is interested or not. Detecting engagement of the learners have sought increased attention to create learner centric models that can enhance the teaching and learning experience. The learner will over a period of time in the platform, tend to expose various emotions like engaged, bored, frustrated, confused, angry and other cues that can be classified as engaged or disengaged. This paper proposes in creating a Convolutional Neural Network (CNN) and enabling it with residual connections that can enhance the learning rate of the network and improve the classification on three Indian datasets that predominantly work on classroom engagement models. The proposed network performs well due to introduction of Residual learning that carries additional learning from the previous batch of layers into the next batch, Optimized Hyper Parametric (OHP) setting, increased dimensions of images for higher data abstraction and reduction of vanishing gradient problems resulting in managing overfitting issues. The Residual network introduced, consists of a shallow depth of 50 layers which has significantly produced an accuracy of 91.3% on ISED & iSAFE data while it achieves a 93.4% accuracy on the Daisee dataset. The average accuracy achieved by the classification network is 0.825 according to Cohens Kappa measure. 2020, Intelligent Engineering & System. All rights reserved. -
Engine behavior analysis on a conventional diesel engine combustion mode powered by low viscous cedarwood oil/waste cooking oil biodiesel/diesel fuel mixture An experimental study
Binary biofuel is the best alternative source that completely replaces petroleum-based fuel. In this study, we have experimented with the waste cooking oil and cedarwood oil as biofuel in a DI CI engine for various proportions and related its combustion, emission, and performance characteristics to those of base diesel. This study aims to eliminate the utilization of fossil fuel in a diesel engine by introducing green binary fuel (low viscous fuel resulting from the blending of cedarwood oil with WCO biodiesel) successfully. The objective of the study is to convert cedarwood WCO into green binary fuel and investigate its performance, emission, and combustion properties. The transesterification process is utilized for the enhancement of WCO as biodiesel. It occasioned a reduction in brake thermal efficiency as the addition of waste cooking oil in the blend increased. At the same time, the maximum value of BTE of 27.8% was attained for B10C90 (10% transesterified waste cooking oil and 90% cedarwood oil in volume), whereas it was 28.1% for diesel at maximum load conditions. The BSEC was 15.4 MJ/kW-hr for B10C90 and 12.8 MJ/kWhr for diesel. The emission characteristics, CO, HC, NOx, CO2, and smoke for B10C90 were 17.93 g/kWhr, 0.55 g/kWhr., 20.09 g/kWhr, 2210.9 g/kWhr, and 25.55%. Combustion features such as NHRR, burn duration, MPRR, combustion efficiency, Ignition delay, and coefficient of variance for B10C90 were 53.74 bar, 29.38 CAD, 4.71 bar/CAD, 99.7%, 7.01 CAD, and 4.73% respectively. It showed that B10C90 had comparable performance (BTE) and combustion values to mineral diesel with better emission characteristics. 2024 The Institution of Chemical Engineers -
Engineered biocorona on microplastics as a toxicity mitigation strategy in marine environment: Experiments with a marine crustacean Artemia salina
The marine environment has become a major sink for microplastics (MPs) wastes. When MPs interact with biological macromolecules, the biocorona forms on their surface, which can alter their biological reactivity and toxicity. In this study, we investigated the impact of biocorona formation on the toxicity of aminated (NH2) and carboxylated (COOH) polystyrene MPs towards the marine crustacean Artemia salina. Biocoronated MPs were prepared using cell-free extracts (CFEs) from microalgae Chlorella sp. (phytoplankton) and the brine shrimp Artemia salina (zooplankton). The results revealed that biocorona formation effectively reduced the toxicity of MPs. Pristine NH2-MPs exhibited higher reactive oxygen species production (ROS) (182%) compared to COOH-MPs (162%) in Artemia salina. Notably, NH2-MPs coronated with brine shrimp CFE exhibited a substantial reduction in ROS production (127%) than those coronated with algal CFE, with COOH-MPs showing a similar trend (120%). Biocorona formation also significantly decreased malondialdehyde (MDA) levels and antioxidant activity compared to pristine MPs. Molecular docking and dynamics simulations demonstrated a strong binding between polystyrene and acetylcholinesterase (AChE). In vitro studies indicated that pristine NH2-MPs exhibited more reduction in AChE activity (84%) compared to COOH-MPs (95%). However, no significant reduction in AChE activity was observed upon exposure to MPs coronated with either algal or brine shrimp cell-free extracts. Independent action modeling indicated an antagonistic interaction for MPs coronated with both the CFEs. Pearson correlation and cluster heatmap analysis suggested that the toxicity reduction in Artemia salina might be driven by decreased oxidative stress followed by the corona formation. Overall, this study provides valuable insights into the potential of biomolecules from phytoplankton and zooplankton to reduce MPs toxicity in Artemia salina, while highlighting their role in modulating the toxicity of other marine pollutants. 2024 The Author(s) -
Engineering a low-cost diatomite with Zn-Mg-Al Layered triple hydroxide (LTH) adsorbents for the effectual removal of Congo red: Studies on batch adsorption, mechanism, high selectivity, and desorption
In this work, naturally occurring, low-cost diatomite (De) or diatomaceous earth (DE) adsorbent was treated with various molar concentrations (0.05, 0.1, and 0.2 M) of Zn-Mg-Al layered triple hydroxide (LTH) using a co-precipitation approach. The DE-modified samples were named 0.05 LDE, 0.1 LDE, and 0.2 LDE and employed to remove Congo Red (CR) dye from an aqueous solution. The adsorbents were examined using XRD, BET-N2 adsorption-desorption method, ATR-IR, FESEM-EDX, and XPS, and also analyzed for zeta potentials of adsorbents at pH values between 5 and 11 to observe their surface charges. The removal efficiencies of CR were 96.5%, 99.7%, and 94.5% for 20 mg of 0.05 LDE, 0.1 LDE, and 0.2 LDE, respectively, at pH 7. A bare DE, however, showed a removal efficiency of only 7.4%. After CR adsorption, the maximum adsorption capacities (qmax) of the adsorbents were examined using the Langmuir isotherm, and the results showed that 0.1 LDE-CR (44.0 mgg?1) had a higher qmax than 0.05 LDE-CR (35.6 mgg?1), 0.2 LDE-CR (27.9 mgg?1), and DE-CR (0.9 mgg?1). The optimal adsorbent of 0.1 LDE was utilized for the selectivity and salt effects based on the investigation's efficiency in removing contaminants. 0.1 LDE has been studied for reusability of up to five cycles and can remove CR up to three cycles with 77.7% and 79.9% efficiency using NaCl and NaOH, respectively. The adsorbents may therefore be particularly effective at removing CR from water and beneficial in industrial settings where dye is often used. 2023 Elsevier B.V. -
Engineering CoMn2O? nanofibers: Enhancing one-dimensional electrode materials for high-performance supercapacitors
One-dimensional CoMn2O4 nanofibers were developed via the electrospinning method, offers a novel approach for designing electrode materials for energy storage device -supercapacitors. Field emission scanning electron microscopy (FESEM) with EDX confirmed the highly porous CoMn2O4 phase with desired composition. Elemental mapping studies confirmed uniform distribution of Co, Mn, and O elements throughout the nanofibers.Electrochemical studies underscored the crucial role of structural voids and spacing in enhancing energy storage capacity, establishing CoMn2O4 as a promising electrode material. Specific energy and power studies yielded remarkable results of 93.84 Whr/kg and 55.20 kW/kg, respectively. Additionally, specific capacitance determination returned 937.42 F/g, indicating exceptional charging and discharging performance over 1000 cycles with 93.3 % capacitance retention. Moreover, the flexible symmetric supercapacitor is expected to demonstrate exceptional flexibility and electrochemical stability, achieving a specific energy of 232 Wh/kg and a specific power of 84 kW/kg at a current density of 1 mA/cm. These findings advance our understanding of CoMn2O4 nanofibers and offer insights into developing efficient and stable energy storage systems for diverse applications. 2025 Elsevier B.V. -
Engineering the functionality of porous organic polymers (POPs) for metal/cocatalyst-free CO2 fixation at atmospheric conditions
Carbon dioxide (CO2) utilization as C1 feedstock under metal/co-catalyst-free conditions facilitates the development of eco-friendly routes for mitigating atmospheric CO2 concentration and producing value-added compounds. In this regard, herein, we designed a bifunctional porous organic polymer (POP-1) by incorporating acidic (-CONH) and CO2-philic (-NH/N) sites by judicious choice of organic precursors. Indeed, POP-1 exhibits high heat of interaction for CO2 (40.2 kJ/mol) and excellent catalytic performance for transforming carbon dioxide to cyclic carbonates, a high-value commodity chemical with high selectivity and yield under metal/cocatalyst/solvent-free atmospheric pressure conditions. Interestingly, an analogous polymer (POP-2) that lacks basic (-NH/N) sites showed lower CO2 interaction energy (31.6 kJ/mol) and catalytic activity than that of POP-1. The theoretical studies further supported the superior catalytic activity of POP-1 in the absence of Lewis acidic metal and cocatalyst. Notably, POP-1 showed excellent reusability with retention of catalytic performance for multiple cycles of usage. Overall, this work presents a novel approach to metal/cocatalyst/solvent-free utilization of CO2 under eco-friendly atmospheric pressure conditions. 2024 Elsevier Ltd -
Enhanced AIS Based Intrusion Detection System Using Natural Killer Cells
Intrusion detection system is used to monitor the system and network activities to identify anomalies and attacks so that integrity, availability, and confidentiality can be preserved. Here an intrusion detection system based on Artificial Immune System is proposed based on Natural Killer (NK) cells with immunological memory. NK cells are created and each NK cells detection radius is determined using the negative selection algorithm and is trained to detect various attacks. Effective cells with high fairness values are proliferated and distributed to the network using clonal selection algorithm. In this paper, two types of NK cell are used-a Heavyweight NK cell (HWNK) and a number of Lightweight NK cells (LWNK). The incoming data is vectorized and Major Histocompatibility Complex Class I (MHC1) is created. Then based on this MHC1, any of the receptors i.e. Activating Receptor or Inhibiting Receptor is activated. If it is the signature of an attack, Activating Receptor is activated. Activating receptor activation results in either cytokine release or apoptosis. Here cytokine release means an alarm is generated informing the administrator and apoptosis stands for dropping of the packet. If Inhibiting Receptor is activated, it's a normal packet there is no action taken. The technique proposed yields high accuracy, better detection rate and quick response time. 2020 River Publishers. All Rights Reserved. -
Enhanced Battery Life with Supercapacitor Applied to Renewable Energy Based Electric Vehicles
The main goal of this work is of developing a control approach, which is able to obtain the smooth switching between energy sources, battery, and Supercapacitor (SCAP). With four separate math functions, a new math function-based (MFB) controller is designed, and this MFB will generate four output signals corresponding to the motor's speed. Further, the MFB is combined with an FLC/PI controller to reach the theme of the work. Two-hybrid different controllers are intended as per the proposed control strategy termed as MFB with FLC and MFB with PI and both are implemented individually in MATLAB/Simulink in four different modes. The entire model is implemented including a solar panel to charge the battery, this solar panel (SP) is connected to the battery and UDC through various control switches. Finally, a comparative analysis is made between two hybrid controllers to know the better-performed controller. 2023 Ecole Polytechnique de Montreal. All rights reserved. -
Enhanced Channel Division Method for Estimation of Discharge in Meandering Compound Channel
Accurate prediction of shear force distribution along the boundary in open channels is a key to the solution of numerous hydraulic problems. The problem becomes more complicated for meandering compound channels. A model is developed for predicting the percentage of shear force at the floodplain (%Sfp) of two-stage meandering channels using gene-expression programming (GEP) by considering five dimensionless parameters viz. the width ratio, relative depth, sinuosity, bed slope, and meander belt width ratio as the inputs in the model. Basing on the %Sfp, the apparent shear force along the division lines of separation in compound channels is selected for discharge calculation using the conventional channel division methods. An Enhanced Channel Division Method (ECDM) is introduced to calculate discharge by assuming interface line at main channel and floodplain junction. A modified variable-inclined (MVI) interface is suggested having zero apparent shear determined from flow contribution in the main channel and floodplain. The MVI interface is further used to calculate discharge in the meandering compound channels. Performance of the GEP model is tested against other analytical methods of calculating %Sfp. Error between the observed and calculated discharges using the MVI interface is found to be the minimum when compared to other interface methods. The enhance channel division method is successfully applied for validating the two available overbank discharge values for the river Baitarani at Anandapur (drainage area of 8570 sq. km), giving the minimum errors of 0.31% and 1.02% for flow depths of 7.5m and 8.63m, respectively. 2020, Springer Nature B.V. -
Enhanced dielectric and supercapacitive properties of spherical like Sr doped Sm2O3@CoO triple oxide nanostructures
Integrating the hybrid nanostructures exhibiting enhanced storage and electrical properties requires tuning of composition of constituents. To address this issue, we prepared Sr2+ nanoparticles (NPs) decorated over Sm2O3@CoO nanostructures (NS) by chemical precipitation. The structure integrity of the composite was determined by analytical tools. Based on the strongest peak of X-ray diffraction (XRD), crystallite size of the nanoparticles was determined to be 26.14 nm, indicating a mixed phase of monoclinic and tetragonal crystal formation. FESEM revealed a spherical-like morphology with a homogeneous distribution of microstructures with average sizes ranging from 68 nm to 60 nm. The optical absorptivity revealed a redshift in absorption bands centred at 337.0 nm, 343.9 nm, and 353.0 nm in UV-region. The optical band gap of NS was found to be in the range of 3.38 eV to 3.15 eV, and the BET surface area of Sr15%:Sm2O3@CoO was found to be 458469 cm2/g with a corresponding pore size of 13.17 nm. All Sr-doped Sm2O3@CoO NS exhibited higher ionic conductivity and dielectric constant than undoped material. In an aqueous KOH electrolyte, the NS showed a specific capacity of 234.2C/g (65.1mAh/g) demonstrating the material as potential candidate in energy storage and dielectrics. 2022 Elsevier Ltd -
Enhanced electrical properties of CuO:CoO decorated with Sm2O3 nanostructure for high-performance supercapacitor
In the present investigation, we have synthesized samarium (Sm) nanoparticles (NPs) and anchored them onto the surface of CuO:CoO nanostructure (NS) by utilizing a simple chemical precipitation method. Nanostructures (NS) were characterized utilizing powdered X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), scanning electron spectroscopy (SEM), transmission electron spectroscopy (TEM), UVvisible spectroscopy (UVVis), and BrunauerEmmettTeller (BET) studies. Resulting Smx CuO: CoO (x = 1%, 5%, 10%, and 12%) NS were investigated for their anomalous electrical and supercapacitive behavior. NS energy storage performance was experimentally determined using cyclic voltammetry (CV), galvanostatic chargedischarge (GCD), and electrochemical impedance spectroscopy (EIS). Sm10%CuO:CoO exhibited better electrochemical response than other samples and showed a maximum specific capacitance of 283.6F/g at 0.25A/g in KOH electrolyte. However, contrary to our expectation, NS displayed rectifying nature in I-V, intercalative nature in C-V, and polaronic permittivity in all concentrations of Sm2O3 doping as compared with undoped CuO:CoO NS. The outstanding properties of Smx CuO:CoO NS are attributed to the synergy of high charge mobility of Sm NPs, leading to significant variation in dielectric permittivity, currentvoltage (I-V) response, capacitancevoltage (C-V) behavior, with the formation of Sm3+ ionic cluster. The clusters lead to a change in dipole moment creating a strong local electric field. Additionally, a CR2032 type symmetric supercapacitor cell was fabricated using Sm10%CuO:CoO, which exhibited a maximum specific capacitance of 67.4F/g at 0.1A/g. The cell was also subjected to 5000 GCD cycles where it retained 96.3% Coulombic efficiency. Graphical Abstract: [Figure not available: see fulltext.] 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature. -
Enhanced encryption technique for secure iot data transmission
Internet of things is the latest booming innovation in the current period, which lets the physical entity to process and intervene with the virtual entities. As all the entities relate to each other, it generates load of data, which lacks proper security and privacy standards. Cryptography is one of the domains of Network Security, which is one such mechanism that helps the data transmission process to be secure enough over the wireless or wired channel and along with that, it provides authenticity, confidentiality, integrity of data and prevents repudiation. In this paper, we have proposed an alternate enhanced cryptographic solution combing the characteristic of symmetric, asymmetric encryption algorithms and Public Key Server. Here, the key pairs of end points (Users Device and IoT device) are generated using Elliptic Curve Cryptography and the respective public keys are registered in Public Key Server along with their unique MAC address. Thereafter, both the ends will agree on one common private secret key, which will be the base for further cryptographic process using AES algorithm. This model can be called as multi-phase protection mechanism. It will make the process of data transmission secure enough that no intermediate can tamper the data. Copyright 2019 Institute of Advanced Engineering and Science. All rights reserved. -
Enhanced Jaya Optimization Algorithm with Deep Learning Assisted Oral Cancer Diagnosis on IoT Healthcare Systems
Recently, healthcare systems integrate the power of deep learning (DL) models with the connectivity and data processing capabilities of the Internet of Things (IoT) to enhance the early recognition and diagnosis of disease. Oral cancer diagnosis comprises the detection of cancerous or pre-cancerous abrasions in the oral cavity. Timely identification is essential for successful treatment and enhanced prognosis. Here is an overview of the key aspects of oral cancer diagnosis. One potential benefit of utilizing DL for oral cancer detection is that it analyses huge counts of data fast and accurately, and it could not need clear programming of the rules for recognizing abnormalities. This can create the procedure of detecting oral cancer more effective and efficient. Thus, the study presents an Enhanced Jaya Optimization Algorithm with Deep Learning Based Oral Cancer Classification (EJOADL-OCC) method. The presented EJOADL-OCC method aims to classify and detect the existence of oral cancer accurately and effectively. To accomplish this, the presented EJOADL-OCC method initially exploits median filtering for the noise elimination. Next, the feature vector generation process is performed by the residual network (ResNetv2) model with EJOA as a hyperparameter optimizer. For accurate classification of oral cancer, a continuously restricted Boltzmann machine with a deep belief network (CRBM-DBN) model. The simulated validation of the EJOADL-OCC algorithm is tested by the series of simulations and the outcome demonstrates its supremacy over present DL approaches. 2024, American Scientific Publishing Group (ASPG). All rights reserved. -
Enhanced Light Scattering Using a Two-Dimensional Quasicrystal-Decorated 3D-Printed Nature-Inspired Bio-photonic Architecture
A number of strategies have been exploited so far to trap photons inside living cells to obtain high-contrast imaging. Also, launching light inside biological materials is technically challenging. Using photon confinement in a three-dimensional (3D)-printed biomimetic architecture in the presence of a localized surface plasmon resonance (LSPR) promoter can overcome some of these issues. This work compares optical confinement in natural and 3D-printed photonic architectures, namely, fish scale, in the presence of atomically thin Al70Co10Fe5Ni10Cu5 quasicrystals (QCs). Due to their wideband LSPR response, the QCs work as photon scattering hotspots. The architecture acts as an additive source of excitation for the two-dimensional (2D) QCs via total internal reflection (TIR). The computational analysis describes the surface plasmon-based scattering property of 2D QCs. The 3D-printed fish scale's image contrast with the 2D Al70Co10Fe5Ni10Cu5 QC has been compared with other 2D materials (graphene, h-BN, and MoS2) and outperforms them. The present study conceptually presents a new approach for obtaining high-quality imaging of biological imaging, even using high-energy photons. 2023 American Chemical Society.