Browse Items (11855 total)
Sort by:
-
Investigation of PWM Methods for a 9 Level Boost Inverter Using CD-type Carriers
The article introduces an innovative boost inverter topology that utilizes two switching capacitors and a single Direct Current (DC) source to generate a nine-level output voltage waveform. This design eliminates the need for sensors or additional electronics since the capacitor voltages automatically balance themselves. Unlike traditional inverters, an input DC boost converter isnt necessary, as the output voltage is often twice the input voltage, particularly when the inverter is powered by a natural source. Furthermore, novel modulation techniques proposed for CD-type carrier waves exhibit enhanced efficiency, higher RMS voltage, and reduced harmonic distortion (THD). The effectiveness of the suggested carriers has been verified through investigations employing phase disposition (PD), alternate phase opposition disposition (APOD), and phase opposition disposition (POD). Each technique described under 9LBI has been assessed using a MATLAB/Simulink configuration. The operational and dynamic performance of the proposed architecture has been modeled using MATLAB/Simulink. 2024, TUBITAK. All rights reserved. -
Investigation of Spectroscopic Parameters and Trap Parameters of Eu3+-Activated Y2SiO5 Phosphors for Display and Dosimetry Applications
Using the solid-state reaction technique, varied Y2SiO5 phosphors activated by europium (Eu3+) ions at varied concentrations were made at calcination temperatures of 1000 C and 1250 C during sintering in an air environment. The XRD technique identified the monoclinic structure, and the FTIR technique was used to analyze the generated phosphors. Photoluminescence emission and excitation patterns were measured using varying concentrations of Eu3+ ions. The optimal strength was observed at a 2.0 mol% concentration. Emission peaks were detected at 582 nm and 589 nm for the 5D0?7F1 transition and at 601 nm, 613 nm, and 632 nm for the 5D0?7F2 transition under 263 nm excitation. Because Eu3+ is naturally bright, these emission peaks show how ions change from one excited state to another. This makes them useful for making phosphors that emit red light for use in optoelectronics and flexible displays. Based on the computed (1931 CIE) chromaticity coordinates for the photoluminescence emission spectra, it was determined that the produced phosphor may be used in light-emitting diodes. The TL glow curve was examined for various doping ion concentrations and durations of UV exposure levels, revealing a broad peak at 183 C. Using computerized glow curve deconvolution (CGCD), we calculated the kinetic parameters. 2024 by the authors. -
Investigation of speech synthesis, speech processing techniques and challenges for enhancements
The sound produced by any human being or instrument can be used for various applications using the concept of extraction or selection. Using this concept, virtual sounds are produced which is prime requirement for various speech synthesis applications. In this paper we review the different speech processing methodologies, parameters involved and the various applications based on the speech quality produced. Though an overview is given on the processing and involved parameter, priority is given to the speech enhancement application. This survey helps to identify the challenges involved in various processing technique involved in speech enhancement of healthy and disordered speech. These findings with different speech production and speech synthesis techniques will help to improve the quality in various application of speech to text (STT), text to speech (TTS), Automatic speech production (ASP) and Automatic speech recognition (ASR). Copyright 2019 American Scientific Publishers All rights reserved. -
Investigation of structural formation of starting composition 2245 in the Bi-Pb-Sr-Ca-Cu-O system superconductors /
Journal of Solid State Physics, Vol.2014, pp.127-133, ISSN No: 2356-7643 (Print), 2314-6842 (Online). -
Investigation of the correlation between optical and ?-ray flux variations in the blazar Ton 599
The correlation between optical and ?-ray flux variations in blazars reveals a complex behaviour. In this study, we present our analysis of the connection between changes in optical and ?-ray emissions in the blazar Ton 599 over a span of approximately 15 yr, from 2008 August to 2023 March. Ton 599 reached its highest flux state across the entire electromagnetic spectrum during the second week of 2023 January. To investigate the connection between changes in optical and ?-ray flux, we have designated five specific time periods, labelled as epochs A, B, C, D, and E. During periods B, C, D, and E, the source exhibited optical flares, while it was in its quiescent state during period A. The ?-ray counterparts to these optical flares are present during periods B, C, and E; however, during period D, the ?-ray counterpart is either weak or absent. We conducted a broad-band spectral energy distribution (SED) fitting by employing a one-zone leptonic emission model for these epochs. The SED analysis unveiled that the optical-ultraviolet emission primarily emanated from the accretion disc in quiescent period A, whereas synchrotron radiation from the jet dominated during periods B, C, D, and E. Diverse correlated patterns in the variations of optical and ?-ray emissions, like correlated optical and ?-ray flares, could be accounted for by changes in factors such as the magnetic field, bulk Lorentz factor, and electron density. On the other hand, an orphan optical flare could result from increased magnetic field and bulk Lorentz factor. 2023 The Author(s). Published by Oxford University Press on behalf of Royal Astronomical Society. -
Investigation of the fractal footprint in selected EURIBOR panel banks
EURIBOR emerged as a conventional proxy for a risk-free rate for a reasonably long period of time after the creation of the Eurozone. However, the joy was short-lived, as the global credit crisis shook the markets in mid-2008. Significant counterparty risk embedded in a derivative transaction cannot be left out. EURIBOR reflects the credit spread on borrowing. Hence, risk and uncertainty are inextricably linked here. This study investigates five banks out of 19 panel banks that manage EURIBOR in various Eurozone countries. These banks, HSBC, ING, Deutsche Bank, the National Bank of Greece and Barclays, are tested from January 2009 to December 2017 on a daily basis. Bank specific EURIBOR can be predicted in all five cases with different degrees. The trace of a profound herd is observed in the case of the National Bank of Greece, others were relatively mild in nature. The customer base and their risk grade were recognized as the main factor. Their information asymmetry and derived information entropy suggest embedded chaos and uncertainty. Bikramaditya Ghosh, Corlise Le Roux, Anjali Verma, 2020. -
Investigation on AI-Based Techniques in Applications for Detecting Fatal Traffic Accidents
The difficulties with road accident rates today rank among the top concerns for health and social policy in nations across the continents. In this essay, we've spoken about the fatalities and injuries brought on by traffic accidents in several Indian states. We have also shed light on the various factors that contribute to traffic accidents. Many researchers have reported various methods for identifying automobile crashes or accidents that are discussed in this work. Additionally, we covered collision avoidance systems and their various kinds. An examination of the analysis techniques used to comprehend the numerous causes causing accidents is also included in the study. Traditional models are frequently used to identify problems such driver weariness, drowsiness, driving while intoxicated, and distractions. 2023 IEEE. -
Investigation on Constraints and Recommended Context Aware Elicitation for IoT Runtime Workflow
Various technological and application challenges arise in the advancement of Internet of Things. Apart from Design and Deployment, Security also falls as a primary challenge to overcome. Device Management is becoming more complex as numerous network services to be handled. Inter-device communication for technical aspects appears to be underappreciated. There is a critical necessity to include this area's requirements and challenges. By abstracting data models and operations and expressing them using semantics, M2Mcommunication and interoperability and may be made simple. A thorough investigation of the foregoing is preparing the way for various approaches. Along with Semantics, a high-level language construct is suggested that can enable run-time workflow construction. Things Markup Language is the name of the concept (TML). 2024, Ismail Saritas. All rights reserved. -
Investigation on Electrode/Electrolyte Interfaces through Impedance Spectroscopy
In the present paper, impedance measurements of the battery configuration, Anode?lithium borophosphate glass electrolyte?LiCoO2 cathode, has been carried out to throw some light on the electrochemical interfacial behavior between the chosen electrodes and electrolyte. The cathode material, lithium cobalt oxide (LiCoO2) has been prepared by three different techniques and characterized. Sol-gel synthesized LiCoO2 showed uniformly distributed spherical shape particles with an average size of 500 nm and also exhibited better electrochemical performance. Charging and discharging (23 cycles) of the battery indicated an OCV of 2 V. However, the theoretical OCV of 4 V could not be achieved. The poor performance of the battery could be attributed to the electrochemical processes and SEI film formation at the electrode/electrolyte interfaces. Impedance spectroscopy shows that the major contributions to the impedance of the battery are the electrolyte resistance and the electrode/electrolyte interfacial resistance. With each recharging cycle, the value of electrolyte resistance remains almost constant; however, the interface resistance increases, during the passage of current, due to the interfacial passive layer formation. 2020 Taylor & Francis Group, LLC. -
Investigation on Mechanical and Durability Properties of Geopolymer Concrete with Ground Granulated Blast Furnace Slag Incorporating Sugarcane Bagasse Ash
This study deals with strength, durability, elevated temperature behaviour, cost, energy and carbon efficiency of sustainable GPC developed with GGBS and SCBA. Sodium hydroxide (NaOH) of 8M, 10M, and 12M and sodium silicate (Na2SiO3) were used as alkaline activators with sodium silicate to sodium hydroxide ratio being 2.5. Fifteen different binary blend GPC mixtures were prepared by varying SCBA content (0%, 5%, 10%, 15% and 20% by mass of precursor) and also by varying molarity of NaOH by 8M, 10M and 12M. The developed GPC's fresh, hardened, microstructural, and correlation characteristics have all been assessed. Various tests such as the slump cone test, Cs, Sts, Fs, and UPV test were conducted. SEM, Edax, and XRD analysis were examined for understanding the microstructural characteristics. For a target strength of 40 MPa, the GPC produced with 20% SCBA and 80% GGBS with an 8M NaOH solution and an SS/SH ratio of 2.5 can be utilized. The reason for the development of higher strength in higher molarity of GGBS-SCBA based GPC specimens is clearly shown by SEM micrographs, which indicate a dense and packed matrix. The presence of CASH gel confirmed this in the GP matrix. Durability studies such as rapid chloride permeability, sorptivity and early and long-term effect of sulphate attack were conducted on GGBS-SCBA based GPC. Also elevated temperature behaviour of GPC specimen subjected to different temperatures of 200?C, 400?C, 600?C and 800?C were studied to evaluate the strength, mass loss and effect on microstructures due to elevated temperature. The degradation of geopolymer concrete at different elevated temperatures was observed by SEM, Edax, XRD and FTIR. From the test findings it is noticed that the GPC developed have good durability characteristics. It is also noticed that geopolymer concrete retains more than 50% of strength up to a temperature of 600 ?C. From scanning electron microscope analysis of GPC developed with GGBS and SCBA, it is found that there are larger crack formations and pores which are visible in the geopolymer concrete matrix when the specimens are exposed to an elevated temperature of 800?C which confirms the degradation of C-A-S-H gel in the GPC mixtures developed. Additionally, incorporation of sugarcane bagasse ash in GPC will reduce disposal problems and also carbon dioxide emission. -
-
Investigation on multistep purified carbon nanostructures synthesized from a variety of hydrocarbon precursors
Nanotechnology has become by far the fastest growing area and the shooting star in materials science. Carbon is a fascinating element observed in a large variety of morphologies and atomic structures owing to its chemical ability to form different hybridizations. Carbon nanotechnology has gained significant attention, energized by discoveries such as fullerenes, followed by carbon nanotubes, and, of course the latest addition to the carbon family, graphene. Graphene, a two- dimensional honeycomb lattice of sp2-bonded carbon atoms, possesses a wealth of exceptional properties that has resulted in intense research activities. Although graphenes prospect for applications in wide areas is attractive, making and manipulating graphene is a daunting task. The most fruitful and cost-effective way to synthesize graphene in huge scale from bulk graphite is by reduction of Graphene oxide. Graphene oxide is nothing but a corrugated carbon sheet with over half of the carbon atoms functionalized with hydroxyl and epoxy groups, and edges partially occupied by hydroxyl, carboxyl, ketone, ester and even lactol structures. It has recently emerged as a new carbon-based nanoscale material that provides an alternative path to graphene due to its own alluring properties. In the present study, carbon nanomaterials are derived from hydrocarbon precursors- kerosene, camphor and liquid paraffin by thermal decomposition. Graphene oxide is then synthesized from these carbon nanostructures by modified Hummers technique. The as-prepared soot nanostructures and graphene oxide nanosheets are investigated by various experimental techniques viz. Raman Spectroscopy, Fourier Transform Infrared Spectroscopy (FTIR), UV- Visible Spectroscopy, Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS), X-Ray Diffraction (XRD), Atomic Force Microscopy (AFM) and X-Ray Photoelectron Spectroscopy (XPS). The effect of ultrasonication on the samples is also studied. -
Investigation on Preserving Privacy of Electronic Medical Record using Split Learning
Artificial Intelligence is deployed in multiple areas, including healthcare. Utmost research is done in AI enabled healthcare industry because of the demands like accurate result, data security, exact prediction, huge volume of data, etc. In conventional deep learning models, the training happens with the dataset that are stored in a single device. This requires a huge storage space and highly efficient machines to train the data. Usage of big data, demands for innovative models that can be deployed and used in confined storage. Split learning is one such collaborative distributed deep learning model that allows the data to be stored in a split fashion. Split learning supports desirable features like less storage, more privacy to raw data, ability to work with resource constraints, etc., making it suitable for storing electronic medical record of patients. This paper discusses the advantages of using split learning for healthcare, the possible configurations of split learning that supports data privacy in healthcare and finally discusses the open research challenges in implementing split learning for healthcare. 2024 The Authors. Published by Elsevier B.V. -
Investigation on the analysis of integration of IoT and AI technologies with information security for advanced education 4.0
This research examines the integration of emerging technologies in the form of the Internet of Things and Artificial Intelligence in driving forward to the educational application of Education 4.0. The systematic meta-analysis study provides evidence in the transformative capability of these technologies regarding attendance, performance, and learning pathway. The systems implementation was in the form of IoT sensors to capture and record student attendance, while the use of Artificial Intelligence based on machine learning models such as Support Vector Machine, Artificial Neural Network, k-Nearest Neighbors, and Decision Tree generated a personalized recommendation for the academic improvement or sports activity to be participated as an extracurricular activity. The performance evaluation of these models was illustrated for accuracy to correctly predict student responses related to the provided recommendations. The findings of implementation suggest the systems significant impacts given the augmented performance achievement with respect to academics and sports is the result of the implementation. It was measured comparing students performance before and after system implementation to capture the interpretation of student improvement regarding the use of the implemented system. The findings indicated that the systems implementation contributed to the increase in academic improvement from 65% to 75% and sports performance from 55% to 70% depending on student response to the provided academical or extracurricular recommendations. Such findings confirm an overall improvement in performance based on the use of the presented system. Taru Publications. -
Investigation on the phase transformation and lattice parameters of Sn2+, Cu2+, La3+ and Ce4+ ions doped titania: characterization and solar light activity study /
International Journal For Light And Electron Optics, Vol.183, pp.496-507, ISSN No: 0030-4026. -
Investigation on thermal barrier effects of 8YPSZ coatings on Al-Si alloy and validation through simulation
In high temperature engineering field, protection of metal components operating at high temperatures has been a problem since the attempts to realize high efficiency aero engines in the 1940s. Researchers have been working on finding a solution for this issue and thermally insulating the surface of the base metal component with a suitable high temperature material, generally a ceramic, is one solution. The Thermal Barrier Coatings, popular worldwide as TBCs have found wide spread applications in aerospace and automobile industry after its successful application in aerospace engines in mid 1970s. In the field of aerospace, generally a super alloy will be the substrate and in automobile field this process is very much suited on aluminium casting alloys, which is the raw material for high speed diesel engine cylinder blocks and pistons. Although a good quantity of research work on TBCs have been completed in the field of aerospace, the published literature on such coatings on Aluminium castings alloys are limited. Present research aims to throw some light in this grey area by plasma spray coating Aluminium-Silicon (Al-Si) substrates with popular Yttria Partially Stabilized Zirconia as top coat and underlying nickel aluminide bond coat. Al-Si alloys are widely used in automobiles. Experiments were conducted to evaluate the temperature drop across a 250 mm thick TBC at different ceramic surface temperatures and then validating the experimental results by simulation in ANSYS. Experimental results and simulated results showed a close match, thereby validating the findings. 2019 Elsevier Ltd. All rights reserved. -
Investigation on window opening behavior in naturally ventilated hostels of warm and humid climate
A window is an inevitable element of a naturally ventilated building, and its usage improves indoor environmental conditions. Various research has presented window opening behavior models, stating that it may vary with region, climate, season, building type and many more environmental and non-environmental factors. Major studies in India relied on survey data and were not focused on continuous monitoring. Limited occupants behavior studies have been reported in warm and humid climatic zones, specifically in hostel buildings. Also, a realistic description of occupants window opening behavior is require for more accurate evaluation of building performance using energy simulation. Therefore, there is a need to study the window opening behavior to predict the indoor environment more accurately by using energy simulation tools. In this context, a one-year field research involving questionnaire survey, physical observation, and monitoring was conducted in different hostel buildings in Tiruchirappalli, India. Logistic models were developed to predict the window state in hostel buildings in warm and humid region based on physical observational and long-term monitoring data. It is found that window use is influenced by season, time of the day, weekdays, floor level, buildings orientation, user type, and gender. Results also showed that insects and animal menace (snakes, squirrels, lizards, mosquitoes etc.) impede window opening behavior. The study also presented a logistic model for window opening behavior based on outdoor environment conditions for simulation modeling. 2022 Elsevier B.V. -
Investigation sustainable business growth via Human resources management /
Patent Number: 202241038950, Applicant: Dr.K Mallikarjuna Rao.
Investigation sustainable business growth via Human resources management Abstract: The management of human resources is essential for helping an organisation improve its efficiency, managing corporate governance and ethical issues that go beyond economic performance, and supporting the realignment of the organization's future direction and vision for new ways of conducting business. Because a focus on achieving maximum employee engagement can have a negative impact on employees in the form of diminished job security and precarious working conditions, it is important to take ethical considerations into account when it comes to the role of HR. -
Investigations on Affective Computing to Improve Classroom Engagement Analysis in Higher Education by Deep Learning
The learning and teaching experience can be improved by using approaches that are not obtrusive to perform a comprehensive student engagement analysis throughout the classroom. In these modern times, when courses are conducted online, it is vital to accurately measure the levels of participation that each individual student has. It is crucial and essential to provide assistance to educators so that they may annotate and comprehend the signifcant learning rate of the students. A system that can perceive data and transpire it into information automates the learning and teaching experience in a classroom. In this study, videos are collected from online and ofand#64258;ine classes that have one single student per frame or many students per frame and are analysed for emotions and behavioural engagement through a multimodal system. newlineLarge amounts of video data processing call for an increase in the hardware resources newlineas well as the time required for processing images. This is particularly true in a newlineclassroom setting, where there are a large number of frames to analyse each and every minute in order to handle classroom involvement detection. Hierarchical Video newlineSummarization is used as a preliminary step on the videos to detect important frames newlinethat have the sum of all the information in the local neighborhood. These key frames newlineserve as important information units that provide details of facial emotions and behavioural aspects. The local maxima estimation based on the frst derivative provides summative information about the local neighborhood. The key frames serve newlineas an input for face detection and emotional analysis. In this research, the method newlinecan perform video summarization on a varied category of videos and with different newlineresolutions. Face detection in a temporal environment have not been trivial. Though there are methods that can identify multiple faces with varied sizes in a frame, it is still a current research topic to address false localization of faces in a frame. -
