Passive control of four storied reinforced concrete structure subjected to blast loads

Title

Passive control of four storied reinforced concrete structure subjected to blast loads

Creator

R, Raghunandan Kumar.

Contributor

Reddy, G R.

Description

In the recent past in major cities all over the world, public structures are vulnerable to blast loads caused by explosions either accidentally or intentionally. The intentional causes are not on hardened military targets but on important civilian structures, like commercial, financial and civic centers. The study of reinforced concrete Ground + 3 Storied structure subjected to blast loads have gained importance, as conventionally the reinforced newlineconcrete structures are not designed for blast loads as many of the loading codes do not mandate for the same and also due to the fact that quantifying the magnitude of the blast load is difficult to estimate. However, the structures are susceptible to damage from the explosion. To protect the life of people and to minimize the damage to the structure, it has become imperative to consider the effect of blast loads too, in addition to newlinethe conventional loads, considered as per the prevailing codes, during the analysis and design of all public buildings. The charge weights of the explosive used on the structure are 8kg, 16 kg and 24kg. The equivalent blast pressure subjected on the structure is determined, to study its corresponding effects for stand-off distances of 3000 mm and 6000mm using surface blast load. The behavior of the structure is newlinestudied by varying the parameters and verified which of these parameters can newlinebe critical to the performance of the structure. The response of the ground floor + 3 upper storied reinforced concrete skeletal structure is studied for understanding the variation of the displacements, strains and stresses for the parameters considered. Using PTC CREO 3.0 the 3D modeling of structure and structural elements were generated. HYPERMESH was used for the discretization (meshing) of structure and its elements. Static analysis and blast load analysis was carried out using ANSYS.

Source

Author's Submission

Date

2020-01-01

Publisher

Christ(Deemed to be University)

Subject

Civil Engineering

Rights

Open Access

Relation

No Thesis

Format

PDF

Language

English

Type

PhD

Identifier

http://hdl.handle.net/10603/426714